Suggestions for ks tools
Ks tools | Power, Garden & Hand Tools
80 result(s)
For 3/16-inch1/4"5/16"+ 3/8"Clockwise and anticlockwise switch Special steel
KS Tools (4042146157299 / 550.1290)
6 point Internal square drive to DIN 3121 / ISO 1174Long execution For machinery usage Phosphate finish
KS Tools. Special tool stee Ideally suited in e.g. fuel vacuum hoses, low pressure systems and water hoses - For removing of hose connections from hose tails
KS Tools (4042146426593 / 400.0900)
KS Tools (4042146223802 / 140.5271)
KS Tools (4042146417980 / 150.0841)
KS Tools (4042146417867 / 150.0832)
For opening and closing of click hose clamps PVC dipped handle Self opening Chrome molybdenum
KS Tools (4042146073063 / 517.0248)
KS Tools. Temperature resistance of 0¡C to +90¡ - Excellent ability to adapt to different forms - High di-electric strength and good mechanical protection - Good resistance to abrasion and corrosion and/or moisture
KS Tools (4042146072462 / 151.8134)
KS Tools (4042146132289 / 918.1752)
KS Tools. With rubber stop for holding the sparks plugs - Internal square to DIN 3120 / ISO 1174 with ball reception
KS Tools (4042146359068 / 911.1512)
KS Tools (4042146235522 / 517.1175)
KS Tools (4042146510841 / 970.0400)
KS Tools 300.0550 Digital Depth Callipers 0–25 m L-125 mm.
KS Tools. Measuring bar in mm and imperial divisions - For external, internal, step and depth measurements - With fixed adjusting screw and fine rolling adjustment
KS Tools (4042146164242 / 300.0535)
KS Tools. Internal square to DIN 3120 / ISO 1174 with ball reception - According to DIN 3124 / ISO 2725-1
Durable, extra long precision points90 angled tips Self opening
For inside and outside circlips Simply plier reconfigaration With rubber grip Interchangeable tips16 types of pliers by reversing the tips
In accordance to DIN 3117Insulated handle to DIN EN 609000Jaw 15 offset
KS Tools. Internal square to DIN 3120 / ISO 1174 with ball reception - According to DIN 3124 / ISO 2725
KS Tools. Internal square to DIN 3120 / ISO 1174 with ball reception - According to DIN 3124 / ISO 2725
KS Tools (4042146108772 / 140.0035)
KS Tools (4042146225516 / 503.4541)
KS Tools. Internal square to DIN 3120 / ISO 1174 with ball reception - According to DIN 3124 / ISO 2725
KS Tools (4042146354001 / 151.2814)
Short execution DIN / ISO 2936Continuous hardened Matt chrome
KS Tools (4042146197608 / 515.3080)
Flank Traction Profile DIN 3113 Form A / ISO 3318 / ISO 7738Jaw 15° offset Ring head 15° offset
KS Tools. Press fitted nickel plated insert bit - Internal square drive to DIN 3120 / ISO 1174 with ball reception
Short execution In accordance to DIN / ISO 2936Continuous hardened Phosphate finish
KS Tools. Internal square drive to DIN 3121 / ISO 1174 - Specially for the wheel assembly and/or dismantling
