Barebone-Computer Waveshare
Aktive Filter
Waveshare
Vorschläge für Barebone-Computer Waveshare
Supports AVR Studio 4/5/6 or higher version(delivered with firmware for AVR Studio 5, can be updated to support AVR Studio 4/6) - Supports all AVR devices with ISP or PDI interface, including XMEGA and certain 51 Devices - Supports Fuses and Lock Bit Prog
Onboard voltage level translator, compatible with 3.3V/5V operating voltage - Supports I2C (default), configurable slave address, supports SPI, switch to SPI via I/O setting - Humidity sensing: 0~100%RH (resolution 0.008%RH, accuracy ±3%RH, response time
USB to RS485 communication.3 LEDs for indicating the power and transceiver status - Adopt original FT232RL, fast communicating, stable and reliable, better compatibility - Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and
There's no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won't be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi. - Onboar
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano - 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step; Adjustable motor d
This is an industrial USB to RS485 converter with original FT232RL and SP485EEN inside. It features embedded protection circuits such as llgthningproof, resettable fuse, ESD protection, and TVS diode, etc. It's pretty small in size. - The USB TO RS485 is
This is an LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface. - Trying to add a control interface for your Pi? Even making the Pi into a handheld game console? This compact displ
Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down - Ultra low power consumption, basically power is only required for refreshing - Compatible with Raspberry Pi Zero/Zero W/Zero
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards - High quality relays, loads up to 5A 250V AC or 5A 30V DC - Photo coupling isolation, prevent interference from high voltage circuit - Onboard LEDs for indicating rela
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. - Due to the advantages like ultra low power cons