Home Improvement
Suggestions for Home Improvement
Caulk Chisel Jigsaw Planer Pliers Primer Router Crowbar Plunger Pry bar Varnish Hole saw Nail gun Shop vac Caulk gun Miter saw Table saw Box cutter Chalk line Nut driver Staple gun Wood stain Belt sander Brad nailer Die grinder Epoxy resin Laser level Palm sander Pipe cutter Pipe wrench Putty knife Screwdriver Stud finder Wood filler Circular saw Hammer drill Polyurethane Speed square Spirit level Tape measure
The Eltako ESR12NP-230V+UC is an impulse changeover switch with a latching relay function for AC voltage range of 8 to 253V. It has a rating of 16 A and 2000 W, suitable for 230 V DC and 230 V AC.
Eltako ER61-UC Relay provides efficient control in electrical systems. Nominal voltage of 230 V ensures compatibility with standard power sources. Maximum switching current capacity is 10 A to handle various loads.
This product is a cable tie made by HellermannTyton with dimensions 12.5x330mm, in black color. It is made from hook-and-loop material and comes in a package of 10 pieces.
The product is a cable tie with measurements of 3,5mm x 150mm in natural color, manufactured by HellermannTyton and available in a pack of 100 pieces.
A lightweight, light‑grey push‑in jumper bar that connects up to five terminals on a WAGO block, offering secure, insulated contacts for quick wiring and reliable signal transfer.
The Hager ST303 is a versatile bell transformer with power output of 8V/12V and an amperage capacity of 1 A. It operates on 230V AC input, providing reliable energy conversion for doorbells and other devices.
Double-deck feed-through terminal block with 6.2mm and 28A capacity, in blue color, for reliable connections.
Three‑pole selective circuit breaker, 63 A, E‑characteristic, rated for 230/400 V with 690 V isolation, IP20 protection, 50 Hz operation, designed for quick‑connect busbar mounting without a neutral switch.
The Phoenix Contact PT 2,5 feed-through terminal block is a 5.2mm quick-connect grey terminal with 24A capability designed for reliable connections in various applications.
The OBO Bettermann 2000378 junction box is a surface mounted 100mm x 100mm box that comes in a pack of 10. It is made for wiring and electrical connections and can be used in various applications.
OBO Bettermann T 60 RW Surface Mounted Junction Box 114x114mm - A high-quality junction box suitable for electrical installations, measuring 114mm x 114mm.
Sleek titanium white frame, 80 × 80 mm, glossy finish, IP20 and halogen‑free thermoplastic construction, designed for direct wall mounting of a single‑gang switch in either horizontal or vertical orientation.
A compact 5‑pin bridge for UT2.5/ST2.5/QTC1.5 terminals, rated up to 24 A and 800 V. It offers a reliable, insulated cross‑connection with a 5.2 mm pitch, ensuring secure, low‑loss signal transfer in industrial circuits.
Secure your DIN rail with this lightweight plastic end bracket, 5.15 mm wide and 48.6 mm long, designed for CLIPFIX 35‑5 terminals. Its quick‑mount design allows fast assembly on a TH35 rail, keeping connections tidy and protected.
The Finder 95.63 is a 5-pin relay socket measuring 68 x 15.5 x 35.5 mm with a blue finish. This compact and reliable device comes in a pack of one for your electrical needs. Its precision and efficiency make it an ideal choice for various applications.
A high‑performance polyurethane construction adhesive in beige, 310 ml (521 g) delivers rapid cure and strong bonding for wood, metal, glass, ceramics and composites, ideal for interior and exterior assemblies.
The Bachmann 740.017 Safety Plug is a protective contact plug with a solid rubber construction and an IP44 rating. It is designed for use with devices up to 250 V and has a black color.
The MCS316 is a compact and robust miniature circuit breaker with a rating of 3-phase 16A, designed for use in electrical systems up to 230V or 400V. Its advanced protection features make it an ideal choice for various applications.
SHT 240: Water leak detector with external sensor, AC-powered to detect hazards and prevent property damage; Schabus 300240.
End/partition plate for terminal block D-PT 2,5-3L compatible with PT 2.5-3L and PT 2.5 PE/L/N.
A gray end plate designed for a 57.7 mm long, 2.2 mm wide, 42 mm high terminal block, sealing contacts against dust and moisture while allowing easy removal for maintenance or replacement.
The Phoenix-Contact PT 4-Quattro PE terminal block is a 6.2mm ground terminal block designed for 1-pole connection with a green-yellow color code. It features quick-connect technology and a triple port PG terminal with a 6.2mm pitch.
KU-M40/25 cable gland reducer is a plastic adapter ring that reduces M40 threads to M25 threads with an outer diameter of 46mm and a length of 16.5mm.
A compact hollow wall box with a 68 mm diameter and 41 mm depth, ideal for thin panel installations. Its slim profile fits neatly into narrow cavities while providing secure cable management and easy access to connections.
The OBO Bettermann 2000164 junction box is a surface mounted electrical device with dimensions of 85mm x 85mm. It comes in a package containing 10 pieces, making it suitable for various applications and installations where multiple junctions are needed.
Securely connect two grounding conductors with the Phoenix Contact PTTBS 2.5‑PE double‑level terminal block, featuring 5.2 mm screw terminals, green‑yellow insulation, and a compact 78 mm width for tight spaces.
Protects PV systems against transient over‑voltages up to 1000 V with a 40 kA rating, type 2 compliance, dual‑pole design and remote signalling for instant fault detection.
This ground terminal block is designed for 2.5mm contact spacing and has a 5.2mm pitch size with quick-connect green and yellow ports. It features modular construction with a Phoenix Contact 3209536 triple port PG terminal.
This is a Phoenix Contact feed-through terminal block designed for connecting wires with quick and secure connections. With a blue color and 5.2mm spacing, it can handle up to 24A of current.
Phoenix Contact PT 2.5 Quattro feed-through terminal block, 5.2mm, 24A, gray color, continuity terminal with quick-connect feature.
Blue feed-through terminal block with two screw terminals per side, rated for 24 A at 800 V, operating from –50 °C to 120 °C, V0 flame class, mounted on TH35 DIN rail, ideal for compact industrial wiring.
Filters