Tools
Suggestions for Tools
File Rasp Vise Level Chisel Jigsaw Router Crowbar Pry bar File set Hole saw Nail gun Shop vac Tool bag Tool box Drill bit Generator Miter saw Table saw Workbench Bit driver Box cutter Chalk line Chisel set Driver bit Nail punch Task light Tool chest Wood plane Work light Belt sander Block plane Bosch drill Brad nailer Claw hammer Die grinder Drill chuck Drill press Laser level Masonry bit
A compact grey feed‑through terminal block with a 5 mm slot, rated for 24 A and supporting three conductors up to 2.5 mm², ideal for secure, low‑profile connections on DIN rails or panels.
A robust, insulated two‑pole cross‑connector that bridges a terminal block for up to six wires, enabling compact, secure connections in electrical panels while maintaining low noise and high reliability.
Ground terminal block for 2‑wire connections, rated at 2.5 mm², featuring a green‑yellow color code. Provides secure, low‑resistance grounding with a compact, one‑pole design and feed‑through capability.
Securely connect up to four conductors up to 2.5 mm² with this green, flange‑mounted terminal strip. Its single‑pole design offers reliable contact and easy installation on DIN rails or panels.
Digitus DN-93831 Face Plate for Multimedia / Keystone Modules, Empty Socket for 2 x Keystone Modules
DIGITUS DN-93831 is an empty socket with front panel designed to hold two keystone modules. It can accommodate RJ45 data outlets and comes in white color.
A robust blue feed-through terminal block with 18.5 mm spacing, rated for 150 A and UL 94 V0 flame resistance, featuring side‑mounted connections and two clamps per single layer for reliable high-current wiring.
Machine screw with 3.2mm diameter and 15mm length, suitable for bus systems, available in packs of 100.
Compact digital weekly timer with a single changeover contact rated 16 A, dual PLE inputs, and 12‑24 V operation. It offers 56 programmable steps per day for precise on/off control in panel applications.
Miniature circuit breaker with 3-pole and 10A current rating, providing protection against overcurrent and short circuits.
Siemens 5SY6110-6 Miniature Circuit Breaker 10 A, 230 V, 400 V. 1-pole, 6 kA short circuit breaking capacity.
The WAGO 2002‑6307 ground terminal block offers a compact, spring‑loaded clamp that grips 5.20 mm conductors securely, with green‑yellow markings for clear identification and quick installation in electrical panels.
HAGER MBN310 - 3-pole miniature circuit breaker with B characteristic, 10 A current rating, 6kA breaking capacity, and 3 module width.
The Hager ST303 is a versatile bell transformer with power output of 8V/12V and an amperage capacity of 1 A. It operates on 230V AC input, providing reliable energy conversion for doorbells and other devices.
Grey straight connector for corrugated hoses, sized at 21.2 mm diameter with an M20 thread and a 1.5 mm inner bore, providing robust, leak‑proof attachment in fluid systems.
Phoenix Contact PT 6 QUAT feed-through terminal block, 8.2mm width, rated current 41A, color gray, pack of 50 pieces.
End/partition plate for terminal blocks, providing a secure and organized connection point.
The WAGO 2010‑434 cross‑connector lets you join two contacts in a 2‑pole terminal block without soldering, offering a tight, low‑resistance fit that keeps wires organized and connections stable.
A robust multilevel installation terminal designed for 2.5 mm² conductors, featuring a slide‑link (N) connection system, N‑type disconnecting capability, and a durable grey housing suitable for floor or panel mounting.
Ground terminal block with a single pole and 6.2 mm contact size. Supports up to 32 A per conductor, suitable for 4‑conductor feed‑through applications. Pack of 50 units in yellow/grey or green‑yellow variants.
Discover the WAGO 2002-1407 Ground Terminal Block: A versatile 1-pole terminal block designed for a 5.2 mm pull spring configuration. Rated at 24A and compatible with 2.5mm² wire, this yellow/grey terminal ensures secure connections.
Ground terminal block with a single pole and 12 mm diameter, rated for 76 A and suitable for conductors up to 16 mm². Features a 3‑conductor feed‑through design in yellow/grey or green/yellow for secure grounding connections.
Securely connect three conductors up to 2.5 mm² with this 24A rated, 1‑pole WAGO ground terminal block. Its 5.2 mm push‑in design offers quick installation and reliable grounding on DIN rail systems.
Blue WAGO 2001‑1204 feed‑through terminal offers secure 18 A connections for 0.25–1.5 mm² conductors, featuring a compact 4.2 mm body and quick‑push design for reliable wiring in DIN rail setups.
Securely connect earth conductors up to 2.5 mm² with this double‑deck terminal block, featuring a 5.2 mm pitch and green/yellow identification for clear grounding in any installation.
Feed-through double-level terminal block with 3.5mm connection and 16A current rating, ideal for secure and efficient electrical connections.
Secure your WAGO terminal block with this blue end/partition plate, 48.5 mm long and rated for 800 V, 18 A. It mounts on a TH35 rail, fits two terminals per layer, and meets UL 94 V0 fire‑rating standards.
Double‑deck feed‑through terminal block, 3.5 mm width, 13.5 A rating, accepts up to 1 mm² wire, grey finish, 50 units per pack, ideal for compact cable connections.
3-conductor feed-through terminal block with 6.2mm width and 32A rating, suitable for conductors 0.5-4.0mm², grey color.
Securely connects two conductors up to 2.5 mm² with a 24 A rating. The 5.2 mm DIN rail mount offers compact, color‑coded green/yellow terminals for reliable earth grounding in industrial circuits.
The PTN 4 neutral disconnect terminal block features a 6.2 mm screw‑type connection, compact 44.8 mm height, lightweight 11.3 g, enabling secure isolation of the neutral conductor in low‑voltage circuits.
Filters