AC & Interior Heating
Suggestions for AC & Interior Heating
Condenser Evaporator Fan shroud Heater core Heater hose AC line hose Blower motor Orifice tube Service valve Receiver drier AC orifice tube Desiccant dryer Expansion valve Cabin air filter Heater core seal Refrigerant hose Refrigerant line Compressor clutch Compressor pulley HVAC control unit AC expansion valve AC pressure sensor AC pressure switch Heater core gasket Mode door actuator Radiator fan motor Blend door actuator Condenser fan motor HVAC control module Low pressure switch Heater control valve Heater hose assembly High pressure switch Radiator cooling fan Blower motor resistor Heater hose connector Radiator fan assembly Climate control module Condenser fan assembly Temperature blend door
The NRF 342021 is a Heater/Blower Resistor that controls the fan speed of your car's interior blower. It features a 3-pin connector and operates at 12 volts.
The NRF 342026 is a 4-pin connector that is compatible with 12 volts and can be used as an interior blower resistor. This resistor helps regulate air flow in the car's heating and cooling system, ensuring optimal comfort for passengers.
The NRF 342048 is an interior heater blower resistor with compatibility to OE 6450EP. It is designed to regulate the airflow and temperature of the car's heating system. This resistor can be found in various stores and online marketplaces.
NRF 342077 Interior Blower Resistor - Compatible with OE numbers 8693262 and 9171541. Provides resistance for the interior blower in automotive applications. Easy installation, reliable performance.
Nrf 342030 is a heater/blower resistor that ensures proper functioning of the vehicle's interior blower. It has OE compatibility and is ideal for replacing faulty or damaged resistors in vehicles.
Nrf 342015 accessory is an interior blower resistor compatible with multiple OE numbers. It's a reliable and efficient part for controlling the speed of the heater fan in your car.
NRF 342063 Interior Heater Blower Resistor is designed to control the speed of the blower motor in vehicles. It features OE 6441FB and 7701209850 compatibility, making it a reliable replacement for the original resistor.
The NRF Air Conditioning Installation is a dryer with an R 134a adapter and seal ring that works seamlessly with the Easy Fit 33369 air conditioning system.
Height [mm]: 655 - Inlet Ø [mm]: 15,5 - Material: Aluminium
Item Package Weight: 2.777 lb - Item Package Length: 21.8cm - Item Package Width: 20.4cm - Item Package Height: 18.8cm
Reliable interior blower motor with efficient airflow, suitable for various applications, ideal replacement or upgrade for consistent performance and durability.
NRF 54387 is an interior heat exchanger for Lancer VIII Sportback CX_A Outlander II CW_W CY/Z_A models with cable. It includes a heater matrix and radiator to provide efficient heating in the cabin.
NRF heat exchanger, interior heating - This part meets original equipment quality specifications. This part is at least as good as the original part the manufacturer supplied the car with. - Heating cooler, plate heat exchanger, heat exchanger: Hyundai Tu
NRF 54330 Interior Heat Exchanger Radiator with OE 1114283,1S7H18476AA,3016497,3349997 Compatibility
Manufacturer restriction: VISTEON - Material: TPE - Rated power [W]: BRAZ
Supplementary article / supplementary information 2: without cable - Thickness: 26 mm - Width: 224 mm
Metzger (4250032690847 / 0917193)
Metzger (4250032687571 / 0917185)
Metzger (4250032698386 / 0917224)
Driver Position: for left-hand drive vehicles - Rated power [W]: 275 - Vehicle Equipment: for vehicles with/without air conditioning
Height [mm]: 645 - Inlet Ø [mm]: 11,8 - Material: Aluminium
NRF 32824 air conditioning systems - Number of Grooves: 8 - Outlet Diameter [mm]: 15,3 - Operating voltage [V]: 24 - Inlet Diameter [mm]: 16
Width [mm]: 632 - Thickness/thickness [mm]: 16 - Additional Item/complementary information 2: with drying - Height [mm]: 331 - Air Conditioning: R 134 a
Belt Pulley ø [mm]: 130 - Capacity compressor [CC]: 120 - Compressor ID: 212 - Compressor oil: PAG 46 - Inlet ø [mm]: 18, 3 manufacturer Restriction: Genuine Panasonic number of grooves: 6 operating Voltage [V]: 12 outlet ø [mm]: 15, 5 pulleys: with v-
Diameter [mm]: 30 - Height [mm]: 305 - Inlet Ø [mm]: 12,25
Height [mm]: 520 - Inlet ø [mm]: 15, 5 - Material: aluminium
Height [mm]: 560 - Inlet ø [mm]: 15.5 - Manufacturer Restriction: Denso Product - Material: aluminium - Outlet ø [mm]: 15.5
Height [mm]: 585 - Inlet Ø [mm]: 15,3 - Material: Aluminium
Height [mm]: 560 - Inlet ø [mm]: 12 - Manufacturer Restriction: Denso Product - Material: aluminium - Outlet ø [mm]: 9
Connecting thread: M10x1,25 - Height [mm]: 625 - Inlet ø [mm]: 18 - Manufacturer Restriction: Denso Product - Material: aluminium
Height [mm]: 160 - Inlet Ø [mm]: 16,5 - Manufacturer Restriction: DENSO - Material: Aluminium - Outlet Ø [mm]: 16,5 - Radiator type: Brazed cooling fins - Supplementary Article/Info 2: without mounting parts - Thickness [mm]: 27 - Width [mm]: 163
NRF 35776 Air Conditioning Condenser is a high-quality OE condenser compatible with multiple models. Its precise fit and durability make it an ideal replacement for the original part.
Compressor ID: SD7V16 - Manufacturer Restriction: Sanden - Operating voltage [V]: 12
Compressor ID: 6SEU / 7SEU - Manufacturer Restriction: Denso - Part Number: 38473
The NRF 53671 Heating is an interior heating radiator exchanger made of aluminium. It fits AUDI Q7 4L, 4LB models from 2006 to 2015 and VW AMAROK 2.0, 2.0D, and 3.0D models from 2010 to 2022.
Compressor ID: 6Seu; 7Seu - Manufacturer Restriction: Denso - Operating Voltage [V]: 12
Condenser for Hyundai air conditioning systems, designed to provide optimal cooling performance and easy installation.
Filters