Number block | Home
Prints from 1 up to 999999Selectable consecutive 2x, 3x and 6x number advance4.5mm high impression Non-print leading zero facility
Prints from 1 up to 999999Selectable consecutive 2x, 3x and 6x number advance4.5mm high impression Non-print leading zero facility
Prints from 1 up to 999999Selectable consecutive 2x, 3x and 6x number advance4.5mm high impression Non-print leading zero facility
Prints from 1 up to 999999Selectable consecutive 2x, 3x and 6x number advance4.5mm high impression Non-print leading zero facility
Prints from 1 up to 999999Selectable consecutive 2x, 3x and 6x number advance4.5mm high impression Non-print leading zero facility
Phoenix Contact ZB 6LGS 11-20 Labeling Strips for 6.2mm Terminal Blocks, White, Pack of 10
Phoenix Contact ZB 6LGS 11-20 Labeling Strips for 6.2mm Terminal Blocks, White, Pack of 10
Terminal block labels 5.2mm, marking for LGS: FORTL.ZAHLEN 31-40, part number 1401802:0031, pack of 10.
White terminal marking strips, 6 mm wide, numbered sequentially from 21 to 30, designed for ZB‑6 block terminals; each pack contains ten durable labels with clear numeric print for easy identification.
Feed-through terminal block with screw connection, 2 connectors, and 12.2mm size, suitable for AWG 16-4 and 16 mm² nominal cross section applications.
Feed-through terminal block with screw connection, 2 connectors, and 12.2mm size, suitable for AWG 16-4 and 16 mm² nominal cross section applications.
A robust red plug‑in bridge with a 5.2 mm pitch, accommodating 20 pins for DIN rail terminal blocks. It offers reliable connections up to 500 V and 24 A, featuring a durable plastic housing and secure clamp design for quick assembly.
White flat tag tape, 5 mm wide, pre‑cut with numbers 1–10 for terminal blocks. Direct mount, clear numeric print, ideal for clean labeling in control panels.
White flat tag tape, 5 mm wide, pre‑cut with numbers 1–10 for terminal blocks. Direct mount, clear numeric print, ideal for clean labeling in control panels.
White flat tag tape, 5 mm wide, pre‑cut with numbers 1–10 for terminal blocks. Direct mount, clear numeric print, ideal for clean labeling in control panels.
Ideal connection clamp between Eindrähtigen ladders//Dock without tool//connection points: 5//Rated voltage: 450 V//Rated Current 24 a - Colour: Transparent/Yellow/Cable Diameter: 0.5 – 2.5 mm² - Can be used e.g. for: Blind, shutter/drain awning
Ideal connection clamp between Eindrähtigen ladders//Dock without tool//connection points: 5//Rated voltage: 450 V//Rated Current 24 a - Colour: Transparent/Yellow/Cable Diameter: 0.5 – 2.5 mm² - Can be used e.g. for: Blind, shutter/drain awning
Ideal connection clamp between Eindrähtigen ladders//Dock without tool//connection points: 5//Rated voltage: 450 V//Rated Current 24 a - Colour: Transparent/Yellow/Cable Diameter: 0.5 – 2.5 mm² - Can be used e.g. for: Blind, shutter/drain awning
The KDS 2.5 is a printed circuit board terminal designed for 1-pole connections. Made by Phoenix Contact, it features a screw terminal with a diameter of 2.50mm². This green terminal comes in a set of 50 pieces.
ZB 4,LGS: sequential numb. 1-10-clamp marking - Terminal block label, 4.2mm width, white, pack of 10 pieces, sequential numbers from 1 to 10.
ZBF 5,lgs:21-30 - Terminal block label for 5mm white terminal blocks. Phoenix Contact 0808671:0021 label strip, white color, pack of 10 pieces.
The FFKDS/V1-5,08 PCB terminal is a printed circuit board connector rated for 15A and 400V with a cross-section of 1.5mm². This green Phoenix Contact terminal features 250 pieces with a raster dimension of 5.08mm and accepts 1 wire pin.
FBS 10-5 GY: A grey cross-connector designed for a 10-pin terminal block with a plug-in bridge and 5.2mm pitch, available in packs of 10 pieces. Manufactured by Phoenix Contact. Weight: 8.591g per unit.
FBS 10-5 GY: A grey cross-connector designed for a 10-pin terminal block with a plug-in bridge and 5.2mm pitch, available in packs of 10 pieces. Manufactured by Phoenix Contact. Weight: 8.591g per unit.
Phoenix Contact ZB 8LGS 11-20 label strip for terminal block, white, 8.2mm width, pack of 10 pieces. Designed to fit 8.2mm terminals, these labelling strips are ideal for organizing and identifying wiring connections in electrical installations.
Phoenix Contact ZB 8LGS 11-20 label strip for terminal block, white, 8.2mm width, pack of 10 pieces. Designed to fit 8.2mm terminals, these labelling strips are ideal for organizing and identifying wiring connections in electrical installations.
PTIO 1.5/S/3 sensor/actuator terminal block for 2-p 3.5mm connectors, push-lock spring terminal design, grey color, pack of 50, voltage capacity up to 250V.
This battery has an alkaline-based chemical composition - The IEC standard code for this battery is 6LR61 - The battery output voltage is 9 V
MPT 0.5/2-2.54: 1 pole PCB terminal with 250 pieces, 2.54mm spacing, screw type, green color. Phoenix Contact PHC 1725656: 2 pin PCB terminal, spacing 2.54mm. Both are printed circuit board terminals for electronics projects.
MPT 0.5/2-2.54: 1 pole PCB terminal with 250 pieces, 2.54mm spacing, screw type, green color. Phoenix Contact PHC 1725656: 2 pin PCB terminal, spacing 2.54mm. Both are printed circuit board terminals for electronics projects.
White labeling strips for 6.2 mm terminal blocks, featuring sequential numbers 1‑10 printed along the length. Each strip measures 6 mm wide and is designed for direct mounting on Phoenix Contact ZB 6,LGS terminals.
The UT 6-PE is a green and yellow ground terminal block for 0.2 to 6mm² conductors, with a one-piece design and 8.2mm spacing between terminals. It is suitable for various applications and provides reliable protection against electrical hazards.
The UT 6-PE is a green and yellow ground terminal block for 0.2 to 6mm² conductors, with a one-piece design and 8.2mm spacing between terminals. It is suitable for various applications and provides reliable protection against electrical hazards.
The UT 6-PE is a green and yellow ground terminal block for 0.2 to 6mm² conductors, with a one-piece design and 8.2mm spacing between terminals. It is suitable for various applications and provides reliable protection against electrical hazards.
White quick‑designation labels for WAGO terminal blocks, each 5 mm wide, featuring numbers 101–150 in clear print. Pack of five durable, halogen‑free cards that snap onto the block for instant identification.
White quick‑designation labels for WAGO terminal blocks, each 5 mm wide, featuring numbers 101–150 in clear print. Pack of five durable, halogen‑free cards that snap onto the block for instant identification.
Filters