Bearing guided router bit
Suggestions for Bearing guided router bit
Draper's 1/4 Roman Ogee router bit features a 35mm x 17mm cutting diameter and is designed for use with TCT routers. The bearing-guided design ensures smooth, accurate cuts every time.
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/4in sha
Supplied with two bearings 9.5 mm and 12.7 mm to enable use as either ovolo or rounding over bits.Diameter 6.5 mm Radius 6.3 mm Depth 13 mm2 x Bearings supplied 9.5 x 12.7 mm Shank 1/4in Tungsten carbide cutting edges, suitable for DIY and Professio
Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. - Supplied with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furniture and joinery applications. - 1/2in shank, perfect for bigger ro
An ideal cutter for newel posts and caps for stairs, supplied with one 9.5mm bearing. - For use in fixed head mode only due to large cutter diameter, smaller bearing available for increased chamfer width. - Cutter specification :- Diameter 50mm, Cut lengt
The Trend CRAFTPRO Intumescent Strip Router Cutter is a 1/4 inch shank tool designed for creating recesses in intumescent strips. This 24mm x 10mm cutting head provides precise and efficient cuts, making it ideal for fire-stopping applications.
The Trend TRE4611514TC 46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius is a bearing guided ovolo and round router cutter with a 15.9mm width, 7.9mm height, and 1/4 inch shank size.
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.1/8in imperial radius for matched replication. Leaves perfect fine round over detail for a contemporary eased edge profile
Dimension R: 4.8 mm - Dimension D: 22 mm - Dimension C: 12.7 mm - Bearings: 9.5/ 12.7 mm - Professional range Tungsten carbide tipped router cutter bits
The product is a bearing guided trimmer router cutter with dimensions of 6.35mm x 25.4mm and a 1/4TC shank size, designed for precision cutting in woodworking projects.
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 9.5mm cutting depth shank mounted bearing guided trimmer. Ideally suited to flush trim laminate and veneer work. - 1/4in sha
Trend's biscuit joiner is a precision tool for creating strong and accurate wood joints, with a 4mm shank size and a 37.2mm cutting diameter. It features a bearing-guided cutter set and a 1/4 TCT blade for smooth cuts.
Proven reliable Faithfull technology Lightweight construction at just 0.09 Kgs High performace for the home or tradesman
Self guiding rebate cutter ideally suited to produce rebates, lap joints, tongues and rebated corners - Cutter supplied with three bearings to achieve three different rebate sizes. six additional bearings are available to allow six alternative rebate dept
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/2in shank
Self guiding rebate cutter ideally suited to produce rebates, lap joints, tongues and rebated corners. - Cutter supplied fitted with two 12.7mm bearings and bearing ring. With bearing ring fitted the cutter will produce a 19.1mm rebate and when removed a
Trend C078X1/2TC Craft Pro 1/2 Shank Guided Rounding Over Router Cutter Bit, ideal for creating decorative edges on wooden projects. Features 31.7mm diameter with cutting length of 15.9mm and two tungsten carbide-tipped bearings for smooth operation.
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth shank mounted bearing guided trimmer. Ideal for flush trim laminate and veneer work. - 1/4in shank for
Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. - Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. - 1/4in shank, ideal for easy con
Attractive edge moulds.A full corner bead can be produced by making a second pass at 90 degrees.Craft pro range tungsten carbide tipped router cutter bits
Attractive edge moulds.A full corner bead can be produced by making a second pass at 90 degrees.Craft pro range tungsten carbide tipped router cutter bits
9.5mm diameter x 25mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminates and wood based materials. - Shank mounted bearing allows good vision of the template for easy and accurate following when ha
This tool can be used in abrasive materials such as laminated chipboard.The drill produces pilot holes only.Tungsten carbide tipped version of the popular Trend snappy drill countersink with adjustable short series HSS drill and non marri
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. - Self-guiding trimmer with bearings mounted on end of cutter. - For trimming plastic or plywood overlay. - For copy profiling, use the bearing to follow a
The Trend 46/02X1/4TC Professional 1/4" Shank Bearing Guided Trimming Router Cutter is a high-quality tool designed for precision cutting. This 19mm diameter bit has a cutting length of 12mm and features a tungsten carbide tip for increased durability.
127mm diameter x 127mm cutting depth 60 degree combi trimmer, perfect for top and lip trimming applications on such materials as laminates and wood based materials - Economical cutter, performs three functions - Will top trim the overlay at 90 degrees, wi
Self-guiding chamfer/bevel cutter, for use with straight and shaped materials. - Tungsten carbide tips and 9.5mm bearing which follows the board beneath. - Cutter specification :- Diameter 32mm, Cut length 12.7mm, Bearing 9.5mm, Angle 45 degrees, Overal l
Cutting length of 40 mm - Enables biscuit jointing with timber, man-made fibre and particle board - Designed to be easy to use
The Trend C079AX1/2TC is a Craft Pro 1/2 Shank Guided Rounding Over Router Cutter Bit with a diameter of 51mm and a cutting length of 25mm. It has a radius of 19mm, bearings of 9.5mm and 12.7mm, and is tungsten carbide tipped.
Discover the Trend C078AX1/4TC Craft Pro 1/4 Shank Guided Rounding Over Router Cutter Bit with a diameter of 31.7mm, cutting length of 18mm, radius of 11mm, bearings of 9.5mm and 12mm, and tungsten carbide tips.
Trend Craft Pro Rounding Over Router Cutter Bit-C076X1/2TC features a 25.4mm diameter, 6.3mm radius, and tungsten carbide tips for precision cutting. The bearings are 9.5mm and 12.7mm in size for smooth operation.
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. - Self-guiding trimmer with bearings mounted on end of cutter. - Professional range Tungsten carbide tipped router cutter bits
Draper's 1/4-inch rebate router bit features a 32mm diameter and a 12mm cutting width, made with tungsten carbide tips for durability and precision. The bearing-guided design ensures smooth operation and accurate cuts.
1/4 inch Chamferring 30mm X 45° Tct Router Bit Router bit with TCT head Twin flute45 degree chamfer Shank: 1/4 inch
1/4 Inch Diameter - Fore use with Draper Router or other manufacturers similar machines - Drape Guaranteed Product
Filters