Eaton fuse
Suggestions for Eaton fuse
The Eaton Z-SLS/NEOZ/3 is a fuse disconnect switch with a voltage capacity of 400V. This high-quality product features a 3xD02 63A Neozed switch disconnector and can be utilized in various applications where power control is needed.
The Eaton LP-CC-2 Fuse Holder is a compact inset holder measuring 10mm in diameter and 38mm in length. It accommodates an HRC fuse with a rating of 2 amps and a voltage capacity of up to 600V.
Low voltage 63A AC knife blade fuse with blown indicator, rated 500V and 120kA, pack of 3 for reliable protection.
Eaton's XNH00-A160-BT NH00 Fuse Switch Dis Connector is a compact and reliable solution for controlling electrical circuits.
The Eaton 277004 DILM17-10 Contactor is a 18A power contactor designed for use with 230VAC and operates at 50Hz with a maximum load capacity of 7.5 kW at 400 V AC.
The Eaton KTK-10 is a pack of 10 quick-acting fuse holders designed for efficient electrical protection. Each fuse insert measures 10mm x 38mm, rated for 10A and 600V, ensuring reliable performance in various applications.
Experience reliable electrical protection with the Eaton Z-SLS/B-25A fuse link. This D0-system, 400V 25A fuse features a blink application for easy fault detection and is part of the GL/GG set.
High‑performance fuse disconnector rated at 63 A, 400 V AC, featuring a rugged enclosure and reliable contact set for low‑voltage switchgear applications.
Compact 22 mm × 58 mm cartridge fuse delivers 100 A protection at 690 V AC, featuring rapid‑acting technology to swiftly interrupt fault currents while ensuring reliable performance in demanding industrial circuits.
Titan 3-Pole Switch Disconnector with Plug and Fuse, 16A delivers safe isolation for three-phase circuits, includes a plug-in fuse base, rugged housing, clear OFF indication, and easy DIN rail mounting.
Durable 3‑pole fuse base with a 63 A rating and 400 V maximum, designed for DIN rail mounting. The 27 mm wide Neozed holder features a sturdy plastic shell, clear identification marks, and straightforward installation.
Compact 63 A three‑pole fuse disconnect switch designed for 400 V circuits, featuring built‑in protection fuses and a rugged enclosure that simplifies maintenance while ensuring reliable isolation in industrial settings.
Gray protective cover for distribution or panelboard, featuring a touch‑protected fuse socket design. Ideal for safeguarding connections while providing easy access to fuses and components in electrical installations.
A compact 3‑pole, 25 A fuse disconnector with D02 housing designed for up to 400 V systems, featuring a robust metal enclosure and integrated circuit protection that ensures reliable isolation and fault interruption in industrial applications.
Three 40‑amp fuse links with built‑in LED indicators, rated for 60–400 V AC, compact D02 form factor, compatible with GL/GG terminals, ideal for protecting motor drives and industrial circuits.
A compact 20‑amp, 400‑volt fuse link featuring a built‑in blink indicator for quick status checks, all housed in a durable metal shell; the set of three ensures reliable protection and easy replacement.
Eaton 50NHG00B‑690 delivers robust protection for low‑voltage circuits, featuring a 50 A rating and 690 V AC capacity with a mechanical blown indicator that instantly signals fault conditions, ensuring reliable operation in industrial applications.
A compact, 2‑ampere time‑delay fuse with a 10.3 mm diameter and 38.1 mm length, rated for 600 V AC. It protects circuits from transient surges while allowing brief overloads to pass before interrupting the current.
Compact 4 A time‑delay fuse measures 10.3 mm in diameter and 38.1 mm long, rated for 600 V AC. It delays fault clearing to safeguard motors and circuits from transient surges while ensuring dependable performance.
A compact, single‑piece time‑delay fuse rated at 10 A and 600 V AC, measuring 10.3 mm in diameter and 38.1 mm long, designed to protect circuits from transient surges while allowing brief overloads to pass.
A compact time‑delay fuse measuring 10.3 mm by 38.1 mm, rated at 3 A and 600 V AC, offers precise protection against transient surges while allowing brief overloads to pass before interrupting the circuit.
A compact time‑delay fuse measuring 10.3 mm by 38.1 mm, rated for 6 A and 600 V AC, offers precise protection with a brief lag before interruption, ideal for motor starters and control circuits.
Compact 14 mm diameter, 51 mm long micro fuse delivers rapid protection for up to 10 A at 690 V AC. Its fast‑acting design cuts overloads instantly, safeguarding sensitive motor drives and control circuits with minimal interruption.
Rapid‑acting micro fuse with a 14 mm diameter and 51 mm length, rated for 40 A at 690 V AC, delivers instant protection against overloads while maintaining compact size for tight installations.
Compact 14 mm × 51 mm micro fuse delivers rapid 50 A protection up to 690 V AC, ideal for motor drives and industrial circuits. Its clear housing shows instant status, ensuring reliable operation in tight spaces.
Compact 22 mm × 58 mm cartridge fuse delivers rapid protection at 40 A up to 690 V AC, ensuring swift interruption of fault currents while maintaining reliable operation in motor drives and control circuits.
The Bussmann by Eaton 20 CT HRC screw‑type fuse delivers rapid protection for up to 20 A at 690 V AC or 500 V DC, featuring a robust metal‑clad construction and quick‑response tripping for reliable circuit safeguarding.
High‑performance screw‑type fuse delivering rapid protection for up to 80 A at 240 V AC or 150 V DC, featuring a robust HRC construction that ensures reliable operation in demanding industrial circuits.