Trend Varijig Self Clamping Guide Router Base Plate
Trend's self-clamping guide router base plate is designed for edge clamp guides, offering precise and easy alignment. The clear base plate allows you to see your work piece while cutting.
Edge guide Trend
Trend Varijig Self Clamping Guide Saw Base Plate
The Trend Varijig Self Clamping Guide Saw Base Plate is a circular saw base plate designed for use with edge clamp guides. It features self-clamping functionality, making it easy to attach to the saw and ensuring accurate cutting every time.
Trend C214X1/2TC Craft Pro 1/2" Shank Guided 3°Door Leading Edge Router Cutter Bit-C214X1/2TC Diameter 24.2mm Cutting Length 50mm Bearing 19.1mm Angle 93.°Tungsten Carbide Tipped, Silver
3 degree undercut router bit with shank mounted bearing guide for routing the leading edge on doors to allow a tight fit against jamb. - Suitable for use in medium - heavy duty Routers with a minimum wattage of 1500 watts. - Cutter specification :- diamet
Trend Precision Carpentry T Square, Black, 700mm
The Trend TSQ T Carpentry Square, measuring 700mm in length and available in black, is a precision tool designed for accurate angles and straight lines during carpentry projects.
Trend - Guided 3 degrees undercut 50mm cut - TR39X1/2TC
Trend - Shank mounted bearing guided door leading edge - Trade Router Cutters
Trend - Guided 3 degrees undercut 50mm cut - TR39X12MMTC
This is a Trend bearing-guided door leading edge undercut router cutter with an angle of 93 degrees and a length of 50mm. It has a width of 12mm and is designed to provide precise cutting for various door applications.
Trend DWS/CP8/FX Ultimate Workshop Double-Sided Sharpening and Flattening Stone
FINE SIDE: 600 grit, 25 microns - EXTRA-COARSE SIDE: 180 grit, 70 microns - MATERIALS: Precision-ground steel with mono-crystalline diamonds set in nickel - DIMENSIONS: 8 x 3- inch surface; 5/16 inch thick - WARRANTY: 5-year limited warranty
Trend - Edge guide 15.8mm diameter x 6mm Green - WP-CDJ300/26
Trend - Spares, routing jigs
TREND TR39AX1/2TC Guided 2 DEG Undercut 50MM Cut
TREND TR39AX1/2TC is a guided door leading edge undercut router cutter with a 50mm diameter and 1/2 inch shank. It features a 92-degree angle and comes with a bearing guide for precise cutting.
Trend - Edge guide 10mm x 33mm brush - WP-CDJ600/32
Trend - Edge guide 10mm x 33mm brush - WP-CDJ600/32
Trend Bearing Guided Door Leading Edge Undercut Router Cutter - 93° Angle, 38.1mm Diameter
Trend Bearing Guided Door Leading Edge Undercut Router Cutter - precision tool for cutting door edges with adjustable 93° angle and 38.1mm diameter.
11 Items