Flute Trend
Active Filters
Trend
Suggestions for Flute Trend
C flute Piccolo Headjoint Alto flute Bass flute Flute case Flute swab B footjoint Boehm flute Flute stand Pearl flute Curved flute Powell flute Sankyo flute Yamaha flute Baroque flute Concert flute Jupiter flute Blessing flute Long footjoint Miyazawa flute Armstrong flute Flute pad saver Low B footjoint Muramatsu flute Open-hole flute Contrabass flute Curved headjoint Transverse flute Yanagisawa flute Closed-hole flute Gemeinhardt flute Split E mechanism Flute cleaning rod Inline G headjoint Inline G mechanism Offset G headjoint Offset G mechanism Trevor James flute Subcontrabass flute
The ideal cutter for use with the Trend Lock jig with the 63mm long premium quality micro-grain Tungsten Carbide cutting edges gaining the additional length required to make the deeper plunges required for the lock mortice. - Perfect for cutting the most
The Trend Craft C076X1/4TC Pro 1/4in shank bearing-guided round over router cutter features a 6.3mm radius and two flute carbide tips for precision cutting.
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.1/8in imperial radius for matched replication. Leaves perfect fine round over detail for a contemporary eased edge profile
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 6.3mm wide X 25.4mm cutting depth with bottom cut feature for increased diversity including light morticing. - Matched 1/4in impe
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo
The Trend CRAFTPRO Intumescent Strip Router Cutter is a 1/4 inch shank tool designed for creating recesses in intumescent strips. This 24mm x 10mm cutting head provides precise and efficient cuts, making it ideal for fire-stopping applications.
The Trend CRAFTPRO Two Flute Straight Router Cutter is a 12.7mm diameter, 31.8mm cut length, and 1/4 inch shank tool made from steel with tungsten carbide tips for increased durability and performance.
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.6mm diameter X 16mm cutting depth with bottom cut feature for increased diversity including light morticing.Matched
As part of the Trend Trade Range, the TR12X1/4TC cutter is designed for use with hinge jigs on a regular basis, and offers durability and flawless performance PTFE coating on the body helps reduce resin, friction and subsequent heat build-up in u
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.Use on softwoods, hardwoods, MDF, plywood and chipboard.Cutter has a bottom cut feature.
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.10mm wide X 25mm cutting depth with bottom cut feature for increased diversity including medium duty shallow morticing.
6mm diameter X 16mm cutting depth ideal for small jointing work, freehand and templated lettering and fine detailing work.Perfect for furniture making, box making modelmaking and other applications where accurate small rebates, slots and grooves
5mm diameter X 16mm cutting depth, ideal for small jointing work, freehand and templated lettering and fine detailing work.Two flute solid carbide insert for increased strength, offering cleaner cutting edges and fast clearance of waste.P
20mm diameter X 25mm cutting depth with two flute Dnamic TCT tips and plunge tip for stopped and plunge cut applications.25mm cut depth for shallower rebates, slots, grooves and mortice applications in hard and softwoods and timber based abrasiv
12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick.Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core lamina
TUNGSTEN CARBIDE: Each cutter has solid tungsten carbide cutting edges for increased performance and durability in solid timber and abrasive sheet materials including ply and MDF - EXCELLENT VALUE: High quality router accessory with long lifespan and cons
12mm diameter X 19mm cut length with extra long shank design for hinge jig work. - The essential cutter for use with Trend Hinge Jigs HINGE/JIG, HINGE/JIG/A and HINGE/JIG/C. - Ensures clean hinge recesses to speed up the process of door hanging increasing
12mm diameter x 63mm cutting depth for use in routers with 80mm plunge capacity. - The essential cutter for use with Trend Lock Jigs to accurately remove the lock body mortice waste. - Increases the speed in which locks can be fitted ensuring maximum prod
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 25mm deep cutting tips with bottom cut feature for general purpose slotting and mortice work. - 16mm wide cut for heavier mortic
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 12mm wide X 19.1mm cutting depth Ideal for use with the Trend HINGE/JIG/B for hinge recessing and Trend Euro Cylinder lock jig EC
Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. - Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. - 1/4in shank, ideal for easy con
Two flute solid carbide insert for increased strength, offering cleaner cutting edges and fast clearance of waste. - 4mm diameter X 11.1mm cutting depth with bottom cut feature for increased diversity including light morticing. - Matched diameter for stri
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 6.3mm diameter X 19.1mm cutting depth with bottom cut feature for increased diversity including light morticing. - Matched 1/4in i
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 45° 'V' groove profile ideal for false panel work and matchboard grooving details. 1/4n shank for smaller routers and easy contro
Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. - Supplied with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furniture and joinery applications. - 1/2in shank, perfect for bigger ro
10mm diameter X 25mm cutting depth with two flute design for fast clearance and clean cutting performance in timber and abrasive wood based materials. - 10mm width ideal for matched inlays, banding and stringing for precision fit. plunge tip for stopped g
The Trend Professional Two Flute Straight Router Cutter is a high-quality tool for woodworking projects. With a diameter of 9.5mm and a cutting length of 25mm, this cutter features two flutes and a plunge centre tip design for precise cuts.
Trend Professional 1/4 Shank TCT Two Flute Straight Router Cutter, 6.3mm diameter x 16mm cut length. Suitable for a range of cutting applications in woodworking projects.
Discover the Trend Professional Two Flute Straight Router Cutter, perfect for your woodworking projects. This high-quality cutter measures 6.3mm in diameter and features a shank length of 1/2.
The Trend CRAFTPRO Router Cutter features a two flute straight design with an 8mm diameter and 25mm cut length, compatible with a 1/4 inch shank.
Trend CRAFTPRO 9.5mm x 31.8mm, 1/4 inch TCT two flute straight router cutter for woodworking and carpentry projects.
The Trend CRAFTPRO TREC03014TC is a 1/4 inch, two flute straight router cutter with a diameter of 19.1mm and an overall length of 25.4mm. Its high-quality construction ensures precise cutting and long-lasting durability.
Trend HSS Two Flute Straight Router Cutter with a diameter of 6.3mm and a length of 28mm, suitable for cutting and shaping wood.
This product is a Trend Professional Two Flute Straight Router Cutter with a size of 20mm x 25mm and a shank diameter of 1/4. It features a two flute design for efficient cutting and is suitable for various woodworking projects.
Trend 3/4 x 1/4 inch two flute cutter for use with straight routers. Made from TCT, it measures 8mm diameter and 19mm length, ideal for cutting through various materials smoothly and accurately.
This product is a two-flute straight router cutter from Trend Professional, featuring a 3.2mm diameter and an 11mm cutting length. It is designed for precise cutting in various materials, with its 3/10 x 1/4 inch shank size fitting most standard routers.