Template guide Trend
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, can also be used with non Trend routers with the same base configuration. - Will also fit other makes of Router when used with GB/5, GB/PLATE or UNIBASE Sub-base. - Guide bush screws GB/01 required f
6.3mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. - Bearing guide can be used with templates with 25mm cut length suitable for trimming work on standard sheet
An ideal cutter for newel posts and caps for stairs, supplied with one 9.5mm bearing. - For use in fixed head mode only due to large cutter diameter, smaller bearing available for increased chamfer width. - Cutter specification :- Diameter 50mm, Cut lengt
The Trend Number Uppercase Template Set is a set of 57mm uppercase number templates designed for use with stencils, stickers, and other crafting projects.
Trend GB18 Guide Bush is a high-quality tool designed for use with universal routers. The 18mm diameter guide bush ensures precise and accurate routing, making it ideal for various woodworking projects.
The Trend Template Profiler is a versatile, precision-guided routing tool that features a 32mm diameter top wheel with a ¼ inch shank for compatibility with various routers.
Angle A: 90° - Dimension C: 25.4 mm - Dimension D: 26 mm
9.5mm diameter x 25mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminates and wood based materials. - Shank mounted bearing allows good vision of the template for easy and accurate following when ha
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 9.5mm cutting depth shank mounted bearing guided trimmer. Ideally suited to flush trim laminate and veneer work. - 1/4in sha
MUST-HAVE FOR ANY ROUTER: The 30mm guide bush is ideal for use with Trend Trade Jigs and for general templating or jig work - PRECISION WORK: Essential for pinpoint accuracy when using jigs - SHORT 6MM SPIGOT LENGTH: Ideal for user-made templates with thi
Used on-site & in joinery shops to increase productivity with excellent results - Four apertures for fire door requirements - No need for marking out in the conventional way - Quick & simple to set-up as the hinge is used as the pattern - Clean & accurate
9.5mm diameter X 12.7mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work.Double shank mounted bearings for increased surface contact for additional stability and control.Useful all rounder for trimming a
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. - Self-guiding trimmer with bearings mounted on end of cutter. - For trimming plastic or plywood overlay. - For copy profiling, use the bearing to follow a
The Trend TSQ T Carpentry Square, measuring 700mm in length and available in black, is a precision tool designed for accurate angles and straight lines during carpentry projects.
Trend Bearing Guided Template Profiler Router Cutter, suitable for use with a router, offers precision and accuracy for edge profiling and template following applications.
Trend's professional two flute straight router cutter is designed for precision and efficiency, with a diameter of 22mm or 25mm and a shank size of 1/2.
The Trend Kitchen Worktop Jig Offset Scriber is a precision tool designed for accurate worktop installation, helping you achieve perfectly aligned edges.
The Trend TEMP/COR/A Corner and Hole Template is a profiler router cutter that measures 12.7mm x 4mm x 1/4. It is designed to create accurate corners and holes in various materials, making it an essential tool for woodworkers and DIY enthusiasts.
Trend Template Shelf Support 32mm Centre - a versatile and sturdy tool for precise routing, suitable for creating consistent spacing and alignment on shelves.
The Trend TEMP/CTI/A Cable Tidy Insert Template is a profiler router cutter set that helps install cables neatly and efficiently. With its 12.7mm and 4mm cutting sizes, it's perfect for various cable diameters.
12.7mm diameter X 9.5mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wood based materials. - Shank mounted bearing allows good vision of the template for easy and accurate following when h
Cuts a 10-Inch hole - For 3/4-Inch flooring - Cuts only the thickness of the flooring - No waste piece - Includes the required router bit and guide bush
Trend Guide Bush 9.5mm - The perfect addition to your router collection, this guide bush provides a secure and accurate hold for precision routing.
Trend CRAFTPRO Bearing Guided Cavetto Router Cutter is a precision tool designed for creating decorative edges on woodworking projects.
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth shank mounted bearing guided trimmer. Ideal for flush trim laminate and veneer work. - 1/4in shank for
Trend Timber Repair Kit Template is a versatile tool for repairing and restoring damaged wood surfaces. It features a guided template profiler with interchangeable bearings and router cutters, making it suitable for various shapes and sizes.
The Trend Butt Hinge Router Template is a precision tool for creating accurate and consistent cuts when installing butt hinges on doors. Designed for both 75mm and 100mm hinges, this template ensures professional results with minimal effort.
Essential for use with Trend hinge jigs, the Trend GB160 guide bush is used with a suitable 12mm diameter cutter for routing the hinge reccesses in the door and frames. - The longer spigot length offers extra support and guidance when routing to ensure th
Trend Bearing Guided Template Profiler Router Cutter with precision guide and adjustable bearings for accurate cutting of wooden templates or patterns. Compatible with 12.7mm, 32mm and 1/2 shank routers.
Trend T46/01 x 1/2 TC Bearing Guided Trimmer Router Cutter, 12.7mm x 25.4mm, provides accurate profiling and trimming with a 90° template.
Trend Bearing Guided Template Profiler Router Cutter with 46/09 x 1/2 TCT 90° Shank Mounted design, measures 19.1mm x 50mm, ideal for accurate routing and profiling.
Trend Bearing Guided Template Profiler Router Cutter, 19.05mm diameter and 63mm length, designed for precision cutting and profiling with a router.
This Trend Template Profiler Router Cutter is a precision tool for guiding and cutting edges on workpieces. The cutter comes in various sizes including 9.5mm, 32mm, and 1/4 inch, making it suitable for different applications.
Trend Bearing Guided Template Profiler Router Cutter is a precision cutting tool designed for template profiling and routing. Its 25mm width and 1/2 inch diameter make it ideal for various woodworking applications.
Trend bearing guided template profile router cutter with a 12.7mm shank, 6.35mm cutting width, and 1/4 inch diameter blade for accurate, repeatable cuts in various materials.
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. - Self-guiding trimmer with bearings mounted on end of cutter. - Professional range Tungsten carbide tipped router cutter bits