Monacor speaker
Suggestions for Monacor speaker
Seas tweeter JBL PA speaker Monacor woofer Visaton woofer Eminence woofer Monacor tweeter Visaton tweeter FaitalPRO woofer Monacor crossover Monacor enclosure Dayton Audio woofer Monacor bass driver Dayton Audio tweeter Monacor active speaker Klipsch monitor speaker Monacor midrange driver Monacor monitor speaker Monacor passive speaker Monacor speaker cabinet Visaton midrange driver Visaton speaker cabinet Monacor horn loudspeaker Visaton horn loudspeaker Monacor compression driver Polk Audio monitor speaker FaitalPRO compression driver
The Monacor MZF-8629 LS-Schutzgitter is a protective speaker grille designed for an 8" speaker. Made of high-quality materials, the grille measures 206mm in diameter and 14mm in height to ensure proper protection and sound quality.
Monacor (4007754153514 / SP-202E)
Monacor SP-3RDP Miniature Flush-Mount Speakers offer clear sound in a compact design, perfect for small spaces. With an impedance of 8 ohms and power handling up to 0.5 watts, these speakers deliver quality audio without taking up much space.
The Monacor ST-950 is a spring-loaded speaker terminal that securely holds speaker wires in place, making it easy to connect and disconnect speakers. It features a compact design with a built-in clamp connector for quick and easy installation.
Monacor SG-250 is a 10 inch decorative speaker grille with a diameter of 267mm and a height of 25mm. It features a stylish design that enhances the appearance of any speaker system while providing effective sound dispersion.
Level control for speakers It comes with front panel and knob Mono version channels Counter clockwise attenuation direction Peak current: 15 w/20 degree c
For standard applications Sound pressure with good linearity from approximate 120 hertz up to the high range Neodymium magnet Music power: 20 wmax Power rating: 150 wrms
Decorative speaker grille from Monacor, designed to fit the SG-75 speakers. The product measures 3" in diameter and is 14mm high. It is made of high-quality materials and enhances the appearance of any audio system.
The Monacor MDM-20 is a 20m long speaker foam sealing tape in grey. This self-adhesive sealing tape helps to dampen sound and reduce vibrations, providing enhanced audio performance for your speakers.
Decorative speaker grille with fine perforation - 2-part version with fixing ring to be screwed for the speaker and push-on grille - Mounting rim serves for mounting the speaker - Cover rim with metal grille covers speaker and mounting completely - 174 mm
The Exciter enables music and voice playback over vibrating surfaces to enhance the music experience. The body shaker is attached to cupboard doors, shelves, table tops, lightweight walls or ceiling panels. - High sound quality: depending on the mounting
Monacor NR-18KS is a humidity-proof horn speaker with 10W power and 8 ohm impedance. It features a compression drive design in black color and comes as a single piece.
Monacor SG-100 speaker cover is a 4" decorative grill with dimensions of 140mm x 14mm. It fits perfectly on the SG-100 Lautsprecher and enhances its appearance while providing protection.
Cover in white. - Similar design as standard halogen-light fittings. - Suitable for speech and background music, very constant frequency. - Quick installation.
Silent operation due to fanless cooling concept - 3 microphone inputs, one of which is a balanced input - Mic 1 with priority circuit and adjustable automatic talkover - 1 telephone input for telephone systems with audio output - Speaker outputs via screw
Set consists of one active and one passive speaker system. connection of the passive system to the active system via spring-loaded speaker terminals - Active speaker system with integrated 2-channel amplifier and psu - Speakers with magnetic shielding
Monacor LSIP-100/1 is a high-quality air-core speaker coil with a nominal inductance of 1.0 mH, designed for use in audio systems.
The SP-15 is equipped with a hard suspended full plastic membrane - The speaker is also moisture-proof - This is a special version for signal tones in alarm systems - The operating temperature range is -25 °C to +70 °C
The SP-39 is suitable for both the production and as a replacement speaker for headphones and headsets. - This speaker is also unbeatable for small signal processing. - The music load capacity is 0.1 watts. - The core sound pressure is 100 dB/1 V/0.01 m.
The SP-13/4 is suitable for general applications up to use in the sound area - Broadband transmission behaviour - The rated load capacity is 20 watts
Active subwoofer modules for the digital age - Powerful bass reproduction in self-built subwoofer systems - High power efficiency and provide an energy-saving operation - Lightweight design models - State-of-the-art technology in the digital d class
Rubber sealing tape for loudspeaker - Self-adhesive sealing tape - Suitable for black speaker systems - Highly flexible, permanently elastic - Measures 10 metre length by 20 mm width by 2 mm thickness
Speaker wedge moulded foam sheets - For the reflection and resonance dampening of cabinet walls - Material class b3 acc. to din 4102 - Available in grey colour - Measures 100 cm length by 50 cm width by 40 mm thickness
Monacor MZF-8631 is a set of speaker grilles for 12" speakers. It features an attractive design and is made from high-quality materials. The grilles measure 310mm in diameter and 15mm in height, providing excellent protection for your speakers.
Monacor MZF-8632 Speaker Grilles are protective covers measuring 15 inches in diameter and 16mm in height. Made from high quality materials, these grilles protect speakers while allowing sound to pass through freely.
Monacor (4007754179750 / BP-104)
Monacor (4007754179767 / BP-150) | Monacor BP-150 Gold, Monacor BP-150 Connector, Connector contacts
Slim version spikes - Adjustable in height - Comes with support disks and drive-in nuts - Black chromium-plated spikes
Especially suitable for miniature speaker systems and column speakers - Cone membrane made of cardboard - Music power: 40 wmax - Power rating: 20 wrms - Frequency range: f3-16,000 hertz
Heat-resistant voice coil and ventilated drive system - Drive configuration of very long excursion for a deep bass reproduction of high volumes - Progressive cone suspension for a high operating reliability - Robust diecast aluminium basket - Ideally suit
Very well-suited for dual arrangements - For pa midrange applications of high power rating with simultaneous use of mid-high range horns - Kapton voice coil former - Mechanical q factor: 5.31 qms - Electronics q factor: 0.46 qes
Monacor (4007754064162 / ST-925GM)
Horn speaker - Fantastic quality - 100v line technique - 20/15/10/5w power taps - Full details available at monacor.co.uk
Filters