Router guide
Suggestions for Router guide
CLAMP GUIDE USE: For accurate guiding of router, saws, and jigsaws - SECURE PLACEMENT: Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten - FAST AND EASY: Ideal for holding and clamping work pieces, getting them in
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, can also be used with non Trend routers with the same base configuration. - Will also fit other makes of Router when used with GB/5, GB/PLATE or UNIBASE Sub-base. - Guide bush screws GB/01 required f
For accurate guiding of router, saws and jigsaws. - Integral clamping jaws and a locking lever provide a quick way of clamping The guide batten. - Ideal for holding and clamping work pieces. - Aluminium extrusion incorporating T-slots. - The clamps are fi
6.3mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. - Bearing guide can be used with templates with 25mm cut length suitable for trimming work on standard sheet
The DEWALT DWS5031 Router Attachment enhances precision and control for your routing tasks. Designed for use with guide rails, it ensures smooth, accurate cuts, making it ideal for woodworking projects.
Ideal for trimming and profiling timber, man-made board Designed with micrograin tungsten carbide tips Cutter is PTFE coated, indicated by distinctive black colouring
An ideal cutter for newel posts and caps for stairs, supplied with one 9.5mm bearing. - For use in fixed head mode only due to large cutter diameter, smaller bearing available for increased chamfer width. - Cutter specification :- Diameter 50mm, Cut lengt
For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.PTFE coated, indicated by distinctive black colouring.Can be used on hardwood
Draper's 1/4 Roman Ogee router bit features a 35mm x 17mm cutting diameter and is designed for use with TCT routers. The bearing-guided design ensures smooth, accurate cuts every time.
Precise guidance rails are straight, even when the rail is extended, due to self-aligning connecting piece Guide rail compatibility Safe operation: anti-splinter guard for clean cut edges and adhesive tapes for non-slip handling
Quick and accurate way to cut angles with your guide rail - Miter segment joins to rail, bevel arm sits against work edge - Pivot and lock to the required angle - Made in United Kingdom
For accurate guiding of router, saws and jigsaws. - Integral clamping jaws and a locking lever provide a quick way of clamping The guide batten. - Ideal for holding and clamping work pieces. - Aluminium extrusion incorporating T-slots. - The clamps are fi
The product is a universal subbase designed to fit most routers, featuring integrated guide bushings and adjustable pins for precision control.
Bearing guided housing router cutter with 19.1mm and 11.1mm cutting diameters, featuring a 1/4" shank for precise routing applications.
Trend's CRAFTPRO Bearing Guided Housing Router Cutter is a precision tool with a diameter of 19.1mm and shank size of 11.1mm, ideal for use with a 1/4 inch collet.
Trend's self-clamping guide router base plate is designed for edge clamp guides, offering precise and easy alignment. The clear base plate allows you to see your work piece while cutting.
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/4in sha
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo
9.5mm diameter x 25mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminates and wood based materials. - Shank mounted bearing allows good vision of the template for easy and accurate following when ha
The Trend CRAFTPRO Intumescent Strip Router Cutter is a 1/4 inch shank tool designed for creating recesses in intumescent strips. This 24mm x 10mm cutting head provides precise and efficient cuts, making it ideal for fire-stopping applications.
Open system accessories for routing on a guide rail Easy handling to create reproducible routing results Commercially available router bit can be used on the adapter with any commercially available rail
Color: Black, Silver - Handle for Circle Cutting Guide - For circle cutting guide 2 609 200 143 and sub-frame 2 607 020 300 - Height: 60 mm
Makita 122703-7 is a trimmer guide assembly compatible with DRT50 and RT0700 routers, used to maintain accuracy while trimming edges.
Supplied with two bearings 9.5 mm and 12.7 mm to enable use as either ovolo or rounding over bits.Diameter 6.5 mm Radius 6.3 mm Depth 13 mm2 x Bearings supplied 9.5 x 12.7 mm Shank 1/4in Tungsten carbide cutting edges, suitable for DIY and Professio
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 45° bearing guided chamfer profile follows straight and curved profiles for crisp, professional detailing work on an edge. - 12.7
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/2in shank
Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. - Supplied with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furniture and joinery applications. - 1/2in shank, perfect for bigger ro
The Trend Craft C076X1/4TC Pro 1/4in shank bearing-guided round over router cutter features a 6.3mm radius and two flute carbide tips for precision cutting.