Hilmor 560853 Guide for GL Minor
Pipe Benders and Vices A precision extruded aluminium guide Suitable for use with the GLM bender Suits 15 mm or 22 mm pipes
Guide | Tools
Bosch 1600A001FT KS 3000 FSN SA Jig Saw for Curved Cuts with the Jigsaw and Guided Circle, Blue
Diameters of 120 mm to 3000 mm allow for a wide range of applications - Compatible with GST 160. GST 140. GST 1400. GST 18 V-LI. GST 18 V-LI S. GST 18 V-LI B jigsaws - Including FSN SA guide rail adapter for guided straight cuts
Trend Varijig Self Clamping Guide Router Base Plate
Trend's self-clamping guide router base plate is designed for edge clamp guides, offering precise and easy alignment. The clear base plate allows you to see your work piece while cutting.
Trend Varijig Self Clamping Guide Router Base Plate
Trend's self-clamping guide router base plate is designed for edge clamp guides, offering precise and easy alignment. The clear base plate allows you to see your work piece while cutting.
Trend SNAPDBGS SNAP/DBG/Set Drill Bit Guide Quick Chuck-5/64 in, 7/64 in and 9/64in
The perfect accessory for trade and hobby users alike, each guide is designed to self-centre into suitably sized countersink, ensuring the pilot hole is perfectly central for professional fitting of screws into woodworking hardware.The three dri
Trend 46/23X1/2TC Professional Guided 45-degree Chamfer Router Cutter Bit, Tungsten Carbide Tipped, 1/2" Shank
An ideal cutter for newel posts and caps for stairs, supplied with one 9.5mm bearing. - For use in fixed head mode only due to large cutter diameter, smaller bearing available for increased chamfer width. - Cutter specification :- Diameter 50mm, Cut lengt
Draper 1/4" Roman Ogee TCT Router Bit with Bearing Guide - 35mm x 17mm
Draper's 1/4 Roman Ogee router bit features a 35mm x 17mm cutting diameter and is designed for use with TCT routers. The bearing-guided design ensures smooth, accurate cuts every time.
Bosch Professional adapters for the FSN OFA guide rail
Open system accessories for routing on a guide rail Easy handling to create reproducible routing results Commercially available router bit can be used on the adapter with any commercially available rail
Trend TRETR3012TC 19.1 x 50 mm TR30 x 1/2 TCT Shank Mounted Bearing Guided Profiler
Ideal for trimming and profiling timber, man-made board Designed with micrograin tungsten carbide tips Cutter is PTFE coated, indicated by distinctive black colouring
Trend TRETR2914TC 12.7 x 25.4 mm TR29 x 1/4 TCT Shank Mounted Bearing Guided Profiler
For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.PTFE coated, indicated by distinctive black colouring.Can be used on hardwood
Trend 46/07x1/4tc Professional 1/4" Shank Bearing Guided Trimming Router Cutter Bit Diameter 6.3mm Cutting Length 25.4mm Tungsten Carbide Tipped
6.3mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. - Bearing guide can be used with templates with 25mm cut length suitable for trimming work on standard sheet
Draper 56791 5679 1185mm Circular Saw
Adjustable angle with max cutting depth 63mm at 90º and 42mm at 45º - Spindle lock, aluminium base - Class II laser cutting guide - Supplied with 24T blade, guide ruler, parallel fence guide and 2M cable with BS plug - Draper 24 months parts and 1
Trend Steel Guide Bush 12mm
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, can also be used with non Trend routers with the same base configuration. - Will also fit other makes of Router when used with GB/5, GB/PLATE or UNIBASE Sub-base. - Guide bush screws GB/01 required f
Trend SNAP/DBG/A Snappy Drill Bit Guide Set - for No6, 8 & 10 Gauge Screws
The essential drill bit guide set for all common countersink sizes from N06 to No10 gauge, complete with No2 Philips and No2 Pozi 50mm long screw driver bits - Makes perfectly centralised pilot holes when fitting countersunk hinges and other ironmongery.
Trend CRAFTPRO Bearing Guided Housing Router Cutter
Trend's CRAFTPRO Bearing Guided Housing Router Cutter is a precision tool with a diameter of 19.1mm and shank size of 11.1mm, ideal for use with a 1/4 inch collet.
Trend CRAFTPRO Bearing Guided Housing Router Cutter
Trend's CRAFTPRO Bearing Guided Housing Router Cutter is a precision tool with a diameter of 19.1mm and shank size of 11.1mm, ideal for use with a 1/4 inch collet.
Trend Varijig Self-Clamping Back-to-Back Clips for Clamp Guides
Securely clamp guide rails with Trend Varijig self‑clamping back‑to‑back clips. Designed for precision mounting, these versatile clips hold two guides firmly in place, providing stability and ease of installation for a clean, professional setup.
Trend Self-Clamping Squaring Attachment for Varijig Clamp Guides
Self‑clamping squaring attachment for Trend Varijig clamp guides. Provides precise, adjustable square alignment on a workpiece, securely locking in place without additional tools, ideal for accurate machining and layout tasks.
Trend Self-Clamping Squaring Attachment for Varijig Clamp Guides
Self‑clamping squaring attachment for Trend Varijig clamp guides. Provides precise, adjustable square alignment on a workpiece, securely locking in place without additional tools, ideal for accurate machining and layout tasks.
Trend Self-Clamping Squaring Attachment for Varijig Clamp Guides
Self‑clamping squaring attachment for Trend Varijig clamp guides. Provides precise, adjustable square alignment on a workpiece, securely locking in place without additional tools, ideal for accurate machining and layout tasks.
Trend Self-Clamping Squaring Attachment for Varijig Clamp Guides
Self‑clamping squaring attachment for Trend Varijig clamp guides. Provides precise, adjustable square alignment on a workpiece, securely locking in place without additional tools, ideal for accurate machining and layout tasks.
Hilmor 560852 Guide for GL Minor
Pipe Benders and Vices Guide suitable for use with the GLM Bender A precision extruded aluminium guide Measures 15mm outer diameter
Trend Varijig Straight Guides 254 Metre
Trend Varijig Straight Cutting Guide Rail System for precise and accurate cutting of wood doors, worktops, and more.
Trend Varijig Straight Guides 254 Metre
Trend Varijig Straight Cutting Guide Rail System for precise and accurate cutting of wood doors, worktops, and more.
wolfcraft Universal Angle & Try Square I 5205000 I For measuring, marking, drawing and guided cutting
This versatile Universal Angle & Try Square tool by Wolfcraft is perfect for measuring, marking, drawing, and guided cutting. Its 90° ruler scale features 300mm/500mm options, making it a valuable addition to any toolbox.
Trend 46/903X1/4TC Professional 1/4" Shank Bearing Guided Trimming Router Cutter Bit Diameter 9.5mm Cutting Length 25mm Tungsten Carbide Tipped
9.5mm diameter x 25mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminates and wood based materials. - Shank mounted bearing allows good vision of the template for easy and accurate following when ha
Bosch 1608190007 Parallel Guide for GKS 55, Silver
The Bosch Parallel Guide is designed to assist handheld circular saw users with accurate and consistent straight cuts. Made from high-quality materials, this accessory ensures precise alignment along the workpiece edge.
Bosch 1608190007 Parallel Guide for GKS 55, Silver
The Bosch Parallel Guide is designed to assist handheld circular saw users with accurate and consistent straight cuts. Made from high-quality materials, this accessory ensures precise alignment along the workpiece edge.
Bosch Professional FSN WAN for Aligning the Guide Rail on the Workpiece
Quick and accurate way to cut angles with your guide rail - Miter segment joins to rail, bevel arm sits against work edge - Pivot and lock to the required angle - Made in United Kingdom
DeWalt Set of 12 pcs Impact Torsion inserts and 2 magnetic adapters DT70512T
The DeWalt Set of 12 pcs Impact Torsion inserts and 2 magnetic adapters, model DT70512T, is a collection of precision-engineered bits designed for extreme impact torsion applications.
Trend 1/4" Bearing Guided Housing Router Cutter 19.1mm x 11.1mm
Bearing guided housing router cutter with 19.1mm and 11.1mm cutting diameters, featuring a 1/4" shank for precise routing applications.
56 Items