Tip it Trend | Tools
The Trend 46/02X1/4TC Professional 1/4" Shank Bearing Guided Trimming Router Cutter is a high-quality tool designed for precision cutting. This 19mm diameter bit has a cutting length of 12mm and features a tungsten carbide tip for increased durability.
This is a professional two-flute straight router cutter by Trend with a diameter of 12mm and a cutting length of 19mm. The blade is made of tungsten carbide and features a 3/8 inch shank, ideal for cutting tasks in woodworking projects.
This is a professional two-flute straight router cutter by Trend with a diameter of 12mm and a cutting length of 19mm. The blade is made of tungsten carbide and features a 3/8 inch shank, ideal for cutting tasks in woodworking projects.
Trend Professional 4/50 x 1/2 TCT Two Flute Straight Router Cutter, 19.1mm diameter, 37mm cutting length, for precise and clean cuts in woodworking projects.
10mm diameter X 25mm cutting depth with two flute design for fast clearance and clean cutting performance in timber and abrasive wood based materials.10mm width ideal for matched inlays, banding and stringing for precision fit.
plunge tip for st
Angle a: 90° - Dimension D: 19 mm - Dimension C: 30 mm - Professional range Tungsten carbide tipped router cutter bits
Top and bottom bearings allows the work to be fed with bottom or top template to prevent tear out on short grain for a premium finish. - 50mm cutting depth for replicating deep profiles cleanly and professional. Double bearing is ideal for router table wo
Blades of cutters can be rotated through 180 degrees to give one new cutting edge. - Professional range Tungsten carbide tipped router cutter bits
12mm diameter X 25mm cutting depth with two flute design for fast clearance and clean cutting performance in timber and abrasive wood based materials - Easy to calculate width to guide bush offset ratios for quick calculation and marking when used for tem
Trend's 4/80 x 1/2 TCT Two Flute Cutter is designed for use with a router, featuring a 25.4mm diameter and a 37mm length for precision cutting.
Trend Professional Two Flute Straight Router Cutter 15.9mm Diameter, 50mm Cutting Length, 1/2" Shank
This is a professional two-flute straight router cutter with a diameter of 15.9mm, cutting length of 50mm and a shank size of 1/2 inch. It features sharp blades that deliver smooth and precise cuts for various woodworking projects.
Two flute straight router cutter with 19.1mm diameter and 50mm length, featuring a 1/2 inch shank and tungsten carbide tips for precise cuts.
Trend Professional Two Flute Straight Router Cutter - a high-quality tool designed for precise cutting and shaping of wood, ideal for various woodworking projects.
Trend. Body hardened and tempered to maintain trueness - Silver braze to ensure tip is bonded securely to body - Thin kerf anti-kickback sawblades for cordless trim saws
The Trend CSB/16048 Craft Pro Trimming Crosscut TCT Blade is ideal for use with Metabo, Bosch, and Festool circular/plunge saws. It features a tungsten carbide tipped 160mm x 48 teeth x 20 bore blade designed for fine cutting of wood.
TUNGSTEN CARBIDE: Each cutter has solid tungsten carbide cutting edges for increased performance and durability in solid timber and abrasive sheet materials including ply and MDF - EXCELLENT VALUE: High quality router accessory with long lifespan and cons
Suitable for various materials such as softwood, hardwood, chipboard, plywood and MDF - Excellent value for money - Supplied in a robust Secure plastic carry case with a handle grip
Excellent value for money, offering a range of the most popular cutters for decorative and constructional woodworking. - The set contains three non-bearing cutters comprising 2 straight cutters, 6.3mm and 12.7mm diameter a 45° 'V' groove and three bearin
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/4in sha
Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. - Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. - 1/4in shank, ideal for easy con
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo
Trend Professional 1/2in shank straight router cutter - 10mm diameter twin flute Dnamic carbide tips
10mm diameter X 19mm cutting depth with two flute design for fast clearance and clean cutting performance in timber and abrasive wood based materials.10mm width ideal for matched inlays, banding and stringing for precision fit.
plunge tip for st
Featuring 2mm thick 63mm long micrograin Tungsten Carbide tips with PTFE coating on the body, the cutter is designed for cutting the most abrasive materials, offering performance and long life in laminate and solid timber worktops.The 12.7mm dia
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.7.9mm wide X 19.1mm cutting depth with bottom cut feature for increased diversity including light morticing.Matched
Two flute solid carbide insert for increased strength, offering cleaner cutting edges and fast clearance of waste.3mm diameter X 9.5mm cutting depth with bottom cut feature for increased diversity including light morticing.Perfect for int
The Trend Craft C076X1/4TC Pro 1/4in shank bearing-guided round over router cutter features a 6.3mm radius and two flute carbide tips for precision cutting.
This tool can be used in abrasive materials such as laminated chipboard.The drill produces pilot holes only.Tungsten carbide tipped version of the popular Trend snappy drill countersink with adjustable short series HSS drill and non marri
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.10mm wide X 25mm cutting depth with bottom cut feature for increased diversity including medium duty shallow morticing.
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.10mm wide X 25mm cutting depth with bottom cut feature for increased diversity including medium duty shallow morticing.
The Trend Professional Two Flute Straight Router Cutter is a high-quality, durable cutting tool designed for precision woodworking and metal machining. It features a carbide tip for increased longevity and improved performance.
Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers.Shank mounted bearing allows good vision of templates for easy and accurate following when hand held routing.1/2in shank, 50mm cutting de
20mm diameter X 25mm cutting depth with two flute Dnamic TCT tips and plunge tip for stopped and plunge cut applications.25mm cut depth for shallower rebates, slots, grooves and mortice applications in hard and softwoods and timber based abrasiv
Experience precision woodworking with the Trend CraftPro C164X1/2TC router cutter bit. This 12.7mm diameter, two-flute, 63mm length straight bit offers clean cuts and smooth finishes on a variety of materials, ensuring professional results every time.
Achieve precise cuts with the Trend CRAFTPRO Two Flute Straight Router Cutter. This reliable tool features a 10mm diameter, 35mm cutting length, and is equipped with tungsten carbide tips for durability.
Precision-engineered, Trend C001BX1/4TC router bit features a two-flute straight design with a 3.2mm diameter and 12.7mm cutting length. Crafted from tungsten carbide for durability, it fits 1/4" shank routers, ideal for detailed woodworking projects.
Trend CRAFTPRO Aluminium and Plastic Cutting Saw Blade, 250mm x 84 Teeth x 30mm Bore. Tungsten Carbide Tipped. For Mitre Table Circular Saws.