Tool use guide Trend | Tools

The perfect accessory for trade and hobby users alike, each guide is designed to self-centre into suitably sized countersink, ensuring the pilot hole is perfectly central for professional fitting of screws into woodworking hardware.The three dri

Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo

Trend's self-clamping guide router base plate is designed for edge clamp guides, offering precise and easy alignment. The clear base plate allows you to see your work piece while cutting.

Trend's self-clamping guide router base plate is designed for edge clamp guides, offering precise and easy alignment. The clear base plate allows you to see your work piece while cutting.

The Trend CRAFTPRO Intumescent Strip Router Cutter is a 1/4 inch shank tool designed for creating recesses in intumescent strips. This 24mm x 10mm cutting head provides precise and efficient cuts, making it ideal for fire-stopping applications.

Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. - Supplied with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furniture and joinery applications. - 1/2in shank, perfect for bigger ro

9.5mm diameter x 25mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminates and wood based materials. - Shank mounted bearing allows good vision of the template for easy and accurate following when ha

The product is a bearing guided trimmer router cutter with dimensions of 6.35mm x 25.4mm and a 1/4TC shank size, designed for precision cutting in woodworking projects.

Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.1/8in imperial radius for matched replication. Leaves perfect fine round over detail for a contemporary eased edge profile

Trend GB18 Guide Bush is a high-quality tool designed for use with universal routers. The 18mm diameter guide bush ensures precise and accurate routing, making it ideal for various woodworking projects.

Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 9.5mm cutting depth shank mounted bearing guided trimmer. Ideally suited to flush trim laminate and veneer work. - 1/4in sha

Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/4in sha

The Trend TSQ T Carpentry Square, measuring 700mm in length and available in black, is a precision tool designed for accurate angles and straight lines during carpentry projects.

Trend QR/DBG/Set 1/4 Hex Shank Quick Release 3 Piece Drill Bit Guide Set, made of tool steel.

RECOMMENDED USE: Ideal for materials from 12 to 19mm thick; Designed for a flawless, secure connection for softer grained hardwoods, softwoods, standard plywood, MDF and particle board as thread gives better holding power - DURABLE CONSTRUCTION: Made from

Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. - Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. - 1/4in shank, ideal for easy con

The product is a universal subbase designed to fit most routers, featuring integrated guide bushings and adjustable pins for precision control.

The product is a universal subbase designed to fit most routers, featuring integrated guide bushings and adjustable pins for precision control.

3 degree undercut router bit with shank mounted bearing guide for routing the leading edge on doors to allow a tight fit against jamb. - Suitable for use in medium - heavy duty Routers with a minimum wattage of 1500 watts. - Cutter specification :- diamet

Cuts a 10-Inch hole - For 3/4-Inch flooring - Cuts only the thickness of the flooring - No waste piece - Includes the required router bit and guide bush

Essential for use with Trend hinge jigs, the Trend GB160 guide bush is used with a suitable 12mm diameter cutter for routing the hinge reccesses in the door and frames. - The longer spigot length offers extra support and guidance when routing to ensure th

Simple to use Sharpener Guide for consistent edges on Chisels and plane irons. Ideal for jointing in hard and softwoods and sheet materials - Four Honing Angles 25°, 27.5°, 30° & 32.5° for increased honing and edge reshaping options - Removable Centri

Self-guiding Bevel cutter, ideal for use with posts and newel caps for stairs. - A useful cutter for bevelling thicker timbers, can be used for the jointing of boxes, pilasters and carcassing. - Cutter specification :- Diameter 35.1mm, D2 9.5mm, Cut leng

Spare extra long drills to suit drill bit guide SNAP/DBG/9 - Dimensions: D=9/64 inch - D=3.5 mm Diameter Imperial: 9/64 Diameter Metric: 3.5 - Dimension R: 2 mm - Dimension D: 23 mm - Dimension d: 20 mm - Dimension B: 12.7 mm

Trend Cove Bearing Guided Router Cutter is a precision tool for creating smooth, rounded edges in woodworking projects. Its 28.5mm diameter and 1/4 shank make it compatible with standard routers.

Trend Template Shelf Support 32mm Centre - a versatile and sturdy tool for precise routing, suitable for creating consistent spacing and alignment on shelves.

Trend Template Shelf Support 32mm Centre - a versatile and sturdy tool for precise routing, suitable for creating consistent spacing and alignment on shelves.

The Trend Bearing Guided Ovolo Round Over Router Cutter is a professional woodworking tool designed for smooth, round edges on wooden surfaces. Its bearings guide the cutter accurately and consistently for a perfect finish.

The Trend Butt Hinge Router Template is a precision tool for creating accurate and consistent cuts when installing butt hinges on doors. Designed for both 75mm and 100mm hinges, this template ensures professional results with minimal effort.

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. - Self-guiding trimmer with bearings mounted on end of cutter. - For trimming plastic or plywood overlay. - For copy profiling, use the bearing to follow a

TREND C121AX8MMTC is a precision-guided template profiler cutter designed for use with a router. Its bearings ensure accuracy and smooth operation, while its adjustable guide provides flexibility in cutting depths from 16mm to 19mm.

Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 32mm cutting depth shank mounted bearing guided trimmer. Ideal for flush trim laminate and veneer work. - Extra care must be

Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 9.5mm diameter X 6.35mm cutting depth shank mounted bearing guided trimmer. Ideal for flush trim laminate and veneer work. - Extra care must b

Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers.Shank mounted bearing allows good vision of templates for easy and accurate following when hand held routing.1/2in shank, 50mm cutting de