Electrical installation
Suggestions for Electrical installation
Fish tape Multimeter Nut driver Wire gauge Clamp meter GFCI tester Megohmmeter Cable cutter Tape measure Crimping tool Socket tester Wire stripper Circuit tracer Conduit bender Soldering iron Terminal block Voltage tester Wire connector Cable connector Electrical tape Voltage detector Conduit connector Receptacle tester Soldering station Digital multimeter Slotted screwdriver Phillips screwdriver Insulated screwdriver Phase rotation tester Circuit breaker finder Terminal crimping tool Automatic wire stripper Non-contact voltage tester
Ancor 311625 16-14 Gauge - 3/8 Inch Heat Shrink Ring Terminal - 25-Pack. This heat shrink ring terminal is designed for use with wiring harnesses and other applications where a secure, insulated connection is needed.
The Whale BE9003 Electric Field Bilge Switch is an automatic bilge pump switch for boats, designed to prevent flooding by activating the pump when water levels rise. It features a highly sensitive sensor that detects even slight changes in water levels.
Ancor 220203 Nylon Ring Terminal - 22-18 AWG - #10 - 100 Pack is a pack of 100 ring terminals made from high-quality nylon.
Ancor's Nylon Ring Terminals are made of high-quality material for reliable wire connections. This 100-piece set is designed to fit wires from 12 to 10 AWG and comes with a fastener size of 5/16 inches.
Ancor Wire and Cable 22-18 AWG #10 Heat-Shrink Ring Terminal, 100 Pack. Durable and easy to install. Ideal for marine and RV applications.
Heat shrink ring terminals with 1/4 inch fastener, for 12-10 gauge applications, in a pack of 100.
The Ancor 702033 is a versatile automatic stripper and crimper that efficiently strips and crimps wire from 10 to 26 AWG.
Ancor 310425 is a 25-pack of heat shrink ring terminals, suitable for 22 to 18 AWG wires and featuring a 1/4 inch diameter.
This product is a float switch with a fuse holder designed for use in water level control systems. It features an automatic mechanism that turns the pump on or off based on the water level, and includes a fuse holder for added safety and protection.
Ancor Nylon Ring Terminal, 12-10 AWG, #8, 100-Pack. Durable and reliable for wire termination in marine and automotive applications.
Anchor Heat Shrink Ring Terminal is a 1/4 inch, 22-18 AWG terminal for wire connections. It comes in a pack of 100 and provides reliable, long-lasting connections.
Ancor 220212 Nylon Ring Terminal, 16-14 AWG, #8, 100 pack. Durable and corrosion-resistant for wire connections. Suitable for marine use.
Blue Sea Systems 15A push-button switch with ON/OFF functionality and red backlighting for easy identification.
Ancor's Heat Shrink Ring Terminals are available in a 25 pack and come in sizes 16-14 AWG with a 1/4 inch ring. These terminals have a heat shrink insulation that provides protection against short circuits, corrosion, and vibration damage.
Ancor's 25-pack of heat shrink ring terminals is perfect for securing wire connections. Each terminal has a 12-10 AWG size and a 1/4 inch diameter, making it ideal for various applications.
Ancor Heat Shrink Ring Terminal - 22-18 AWG - #8 - 25 Pack. Durable, reliable, and easy to use for various electrical connections.
Anchor Nylon Ring Terminals are an essential component in wiring applications. These ring terminals are made of high-quality nylon and are designed for use with 8 AWG wire. They measure 5/16 inch in diameter and come in a pack of 100 units.
Ancor 311499 Heat Shrink Ring Terminal, 16-14 AWG, 1/4 inch diameter, 100 pack. High-quality, heat shrinkable ring terminals for wire connections in automotive, marine, and industrial applications.
Ancor 312325 Heat Shrink Ring Terminal, 12-10 AWG, #10, 25-pack. Durable and reliable for wiring applications.
Ancor 12-10 Gauge #8 Heat Shrink Spade Terminals, a pack of 100, are designed for wire connections and offer heat shrink protection.
Extend your Garmin GRF10 rudder feedback sensor up to 15 meters with this durable, high‑frequency cable. Designed for seamless integration, it keeps signal integrity and offers easy installation.
Ancor 8 AWG Nylon Ring Terminal, 3/8 inch, 25-pack. Ideal for marine applications. Heat shrink included.
Anchor 311599 Heat Shrink Ring Terminal is a 16-14 AWG, 5/16 inch ring terminal. It comes in a pack of 100 and is made to withstand high temperatures.
Blue Sea Systems e-Series single circuit battery switch is designed to manage power from multiple batteries in marine or RV systems. This on/off switch allows you to disconnect a battery safely and easily.
The Rule 41 Deluxe 3-Way Panel Lighted Switch is a red switch designed to control an automatic bilge pump. It features a light that indicates when the pump is active, making it easy to monitor the status of your boat's bilge system.
Ancor Heat Shrink Ring Terminals are available in a pack of 100, with each terminal measuring 12 to 10 AWG and 5/16 inches. The terminals have a yellow heat shrink ring for added protection.
The Rule 37FA SuperSwitch Float Switch is a float switch that comes with a fuse holder. It has a 5-year warranty and is designed for use with Rule Pumps products.
The BEP Marine 700 Easyfit Battery Switch is a reliable and easy-to-use switch that allows for seamless switching between two batteries, with a continuous rating of 275 amps.
The Blue Sea Systems m-Series Mini On-Off Battery Switch is a single circuit switch that allows you to control the flow of power from your battery. It features a red knob and can be used in both on and off positions.
This compact battery switch allows you to easily connect and disconnect a single electrical circuit in your boat or vehicle, making it perfect for those looking for an efficient way to manage their power sources.
The Blue Sea 9077 is a 240VAC rotary switch with 65 amp capacity, allowing for off and three position settings.
The Johnson Pump 36303 Ultima Switch is an automatic control system that utilizes solid-state level sensing technology.
The Johnson Pump 26014 is a bilge switched automatic float switch designed for pumping water out of boats. It has a maximum current rating of 15 amps and operates mechanically.
The Bennett Trim Tabs ES2000A is a Euro Style Rocker Switch that includes a 20' Wire Harness for easy installation. It provides control over the trim tabs on your boat, allowing you to adjust them as needed for optimal performance and stability.
Lenco Marine's LED two-piece indicator switch with pigtail is designed for single actuator systems. It provides a reliable and easy-to-use tactile interface for controlling your boat's electronics.