Electrical installation Eltako
Active Filters
Eltako
Suggestions for Electrical installation Eltako
Fish tape Multimeter Nut driver Wire gauge Clamp meter GFCI tester Megohmmeter Cable cutter Tape measure Crimping tool Socket tester Wire stripper Circuit tracer Conduit bender Soldering iron Terminal block Voltage tester Wire connector Cable connector Electrical tape Voltage detector Conduit connector Receptacle tester Soldering station Digital multimeter Slotted screwdriver Phillips screwdriver Insulated screwdriver Phase rotation tester Circuit breaker finder Terminal crimping tool Automatic wire stripper Non-contact voltage tester
This product is a radio receiver and dimmer actuator with flush mount, designed for use in residential or commercial settings. It works on voltage ranges from 110-240V and is manufactured by Eltako.
ELTAKO ER12-002-UC - Installation relay for 230VAC/DC, features 2 changeover contacts with a maximum load of 250V/16A.
Universal dimmer switch 230 V, power MOSFET up to 400 W, ESL up to 400 W and LED up to 400 W - Dimmer. - Can be used with timer/timer
The Eltako Dimmer 1-10V for EVG SDS 61/1 to 10V, 2719519 is an electronic ballast control dimmer switch with a voltage range of 1-10V, specifically designed for use with the SDS61/1 lighting system.
Rail mounting device. - Universal dimmer switch. - For R, L and C loads. - Up to 400 W. - Switching voltage 230 V.
Eltako FSR61/8-24V UC - Wireless Actuator for flush installation, radio receiver at 868MHz, maximum switching capacity of 2000 Watts, 30m max range in open field. Latching relay.
Eltako FSR61-230V Wireless Actuator Impulse Switch with Flush mount design offers a maximum switching capacity of 2000W and a wireless range of up to 30 meters in an open field.
The Eltako FT4F-RW is a wireless push button with two channels for surface mounting with a maximum range of 100 meters in open field. It can be used as a remote control for switching devices such as lights, shutters and blinds.
Compact FSS12-12V DC Energy Meter Transmitter Module for Bus Systems - Accurate, Reliable Electricity Measurement & Monitoring. Easy Integration!
Rail mounted device. - Energy consumption indicator. - with display. - Starting current: 20mA. - Maximum current: 32A.
The FSU14 is an 8-channel timer with a display and is part of the Eltako Bus family, designed for home automation. It uses the RS485 protocol to communicate with other devices on the bus.
KNX ENO 636 - 4010312318904 - Eltako KNX ENO 636 - 30000948 - EnOcean-KNX Gateway KNX ENO 636