24.26 AUD
BERU Glow Plug 12238572135
Cone Pitch: 63Connector type: 4 mm Failure Moment [Nm]: 35Fitting Depth [mm]: 29Rated Current [A]: 8.5Spanner Size: 10 mm Thread Size: M10x1,0Tightening torque from [Nm]: 15Overall Length [mm]: 134
Stores where to buy this product
Other stores where to find this product
Similar products
Beru Glow Plug 12238572135
The Beru Glow Plug 12238572135 is a high‑performance ignition component designed for diesel engines that require reliable pre‑heating to ensure smooth start‑up and optimal combustion. This glow plug delivers consistent heat output, enabling quick engine warm‑ups even in extreme cold conditions.
Key Technical Specifications
- Model: GE118 (also referenced as 12238572135)
- Voltage: 4.4 V DC, 9 A current draw
- Thread Size: M10x1.0 mm
- Operating Temperature Range: -40 °C to +120 °C (typical for diesel glow plugs)
- Material Composition: High‑grade alloy with a ceramic insulator for durability and heat resistance.
- Installation Compatibility: Engine models including BMW 1 Series, MINI, X1, and various touring variants (R56, R55, R60, R57, R58, R61, R59, N47).
Design Features
The glow plug incorporates a robust ceramic core that retains heat efficiently while withstanding the high temperatures generated during engine operation. Its sealed construction protects against moisture and contaminants, extending service life in demanding environments.
Heat Output & Efficiency
The 12238572135 model is engineered to provide a stable heat output that accelerates combustion chamber temperature rise. This results in reduced cold‑start emissions, lower fuel consumption during warm‑up, and improved overall engine responsiveness.
Electrical Characteristics
Operating at 4.4 V DC, the plug draws a maximum of 9 A, making it compatible with standard diesel engine control units (ECUs) that supply low‑voltage ignition signals. The electrical design ensures minimal power loss and reliable operation across a wide range of battery voltages.
Installation & Maintenance
Installing the Beru Glow Plug 12238572135 is straightforward:
- Remove the old glow plug using an appropriate socket or wrench.
- Clean the cylinder head to ensure a proper seal.
- Screw in the new plug, tightening it to the manufacturer’s torque specification (typically around 30 Nm for M10x1.0).
- Reconnect the electrical connector and verify correct polarity.
Routine checks should include:
- Visual inspection for cracks or corrosion.
- Testing resistance with a multimeter to confirm continuity.
- Replacing after every 10,000–15,000 km or as recommended by the vehicle manufacturer.
Compatibility Overview
The glow plug is specifically tailored for diesel engines in:
- BMW 1 Series (F20/F21) – including models such as 116d, 114d, and Clubman variants.
- MINI – R56, R55, R60, R57, R58, R61, R59, N47 series.
- X1 (F48) – compact SUV models with diesel powertrains.
- Gran Tourer and Active Tourer – touring variants that share the same glow plug architecture.
Performance Benefits
Choosing the Beru Glow Plug 12238572135 offers several advantages:
- Rapid Warm‑Up: Shorter engine start times in cold weather.
- Reduced Emissions: Consistent heat leads to cleaner combustion and lower particulate output.
- Fuel Efficiency: Less fuel is required during the warm‑up phase, contributing to overall mileage gains.
- Longevity: Durable construction reduces the frequency of replacements.
Quality Assurance & Standards
The product adheres to stringent automotive quality standards. It is manufactured under controlled conditions, with each unit undergoing:
- Electrical resistance testing.
- Thermal cycling to simulate real‑world operating temperatures.
- Mechanical stress tests to ensure thread integrity and torque tolerance.
Environmental Considerations
The glow plug’s efficient heat generation contributes to lower greenhouse gas emissions during the critical warm‑up period. Its long service life also reduces waste associated with frequent replacements, aligning with sustainable automotive practices.
Conclusion
The Beru Glow Plug 12238572135 (GE118) stands out as a reliable, high‑quality component for diesel engines requiring dependable pre‑heating. Its robust design, precise electrical characteristics, and proven performance across multiple vehicle platforms make it an essential upgrade or replacement choice for enthusiasts and professionals alike.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand | ![]() Beru AG is a German automotive parts manufacturer that produces ignition coils, spark plugs, and other engine-related components. The company has a long history of supplying parts to the automotive industry, and today is a leading supplier of components to both the original equipment and replacement markets. |
| Model | Beru AG GE118 |
| MPN | Beru AG GE118 |
| ID | 8287972 |
| Dimensions / Weight | |
| Key Features | |

