febi bilstein 46316 ABS Sensor, pack of one

FEBI Bilstein 46316 ABS Sensor – Precision Wheel Speed Detection

The FEBI Bilstein 46316 ABS Sensor is a high‑performance wheel speed sensor designed for rear axle applications in a wide range of vehicles, including Ford, Mazda, and Volvo models. This single‑unit sensor delivers reliable data to the vehicle’s Anti‑Lock Braking System (ABS) and Electronic Stability Program (ESP), ensuring optimal braking performance and vehicle stability under all driving conditions.

Key Functionalities

• Accurate Wheel Speed Measurement: Provides precise rotational speed data to the ABS control module, enabling timely brake pressure modulation.
• Robust Construction: Built with high‑temperature resistant materials and a sealed housing that protects against moisture, dust, and vibration.
• Easy Integration: Compatible with OEM wiring harnesses and mounting brackets for seamless installation on rear axles.
• Wide Temperature Range: Operates reliably from –40 °C to +120 °C, suitable for both cold climates and high‑performance driving.

Technical Specifications

Vehicle Compatibility Overview

The sensor is engineered for a broad spectrum of models. Below are representative vehicle families that accept the 46316 ABS Sensor:

• Ford: Focus, C‑Max, Grand C‑Max, Mondeo, Kuga, Explorer, S‑Max, Galaxy, and many others.
• Mazda: Mazda3, Mazda5, MX‑5 (Miata), and various engine variants.
• Volvo: C30, V50, S40, C70, and other rear‑wheel drive platforms.

For a complete list of compatible models, consult the OEM part number references such as 1223622, 1225843, and 1481190.

Installation Guide

1. Safety First: Disconnect the vehicle battery to prevent electrical shock.
2. Remove Old Sensor: Unscrew the existing sensor from the rear axle housing and detach the wiring harness.
3. Prepare New Sensor: Align the sensor’s mounting flange with the bracket, ensuring proper orientation of the Hall‑Effect element.
4. Secure Mounting: Tighten bolts to the manufacturer’s torque specification (typically 15–20 Nm).
5. Reconnect Wiring: Plug the sensor harness into the vehicle’s connector, ensuring a snug fit.
6. Test Functionality: Reconnect the battery and start the engine. Verify that the ABS light remains off or turns on briefly during initial calibration.

Performance Benefits

• Enhanced Braking Safety: Accurate wheel speed data allows the ABS system to modulate brake pressure precisely, preventing wheel lock‑up even under sudden deceleration.
• Improved Vehicle Stability: ESP receives reliable inputs for traction control and stability management, reducing skidding risks on slippery surfaces.
• Longevity: The sensor’s durable construction resists harsh operating environments, extending service life beyond typical aftermarket replacements.

Quality Assurance & Compliance

The FEBI Bilstein 46316 ABS Sensor meets stringent automotive standards, including ISO 9001 quality management and ISO/TS 16949 automotive sector requirements. It is also compliant with UNECE Regulation No. 48 for vehicle safety systems.

Maintenance Tips

• Inspect the sensor housing for cracks or corrosion periodically, especially in high‑salt environments.
• Avoid using abrasive cleaners on the sensor’s magnetic surface; a soft cloth with mild detergent is sufficient.
• If the ABS warning light remains illuminated after replacement, perform a diagnostic scan to clear any residual fault codes.

Conclusion

The FEBI Bilstein 46316 ABS Sensor delivers reliable, high‑precision wheel speed detection essential for modern braking and stability systems. Its robust design, broad vehicle compatibility, and adherence to automotive safety standards make it a trusted choice for technicians and vehicle owners seeking optimal performance and peace of mind on the road.