2.06 CAD
ADATA Ultimate SU630 480GB Solid State Drive, black
Adata's Ultimate SU630 is a high-speed 480GB solid state drive with SATA III interface, perfect for upgrading your computer's storage and speeding up your system
Stores where to buy this product
Other stores where to find this product
dealtargets.ca
Similar products
Introducing the ADATA Ultimate SU630 480GB Solid State Drive
The ADATA Ultimate SU630 is a high‑performance, compact 2.5‑inch SATA SSD that delivers blazing speeds and reliable endurance for both desktop and laptop systems. With its advanced QLC 3D NAND architecture, this drive offers an impressive balance between capacity, speed, and cost efficiency.
Key Specifications at a Glance
- Capacity: 480 GB
- Form Factor: 2.5″ (69.85 mm width, 7 mm height)
- Interface: SATA III (6 Gb/s)
- Read Speed: up to 520 MB/s
- Write Speed: up to 450 MB/s
- Random Read IOPS: 40,000 (4 KB)
- Random Write IOPS: 65,000 (4 KB)
- MTBF: 1,500,000 hours
- Power Consumption: 0.33 W active (typical)
- Weight: 47.5 g
- Operating Temperature: –40 °C to +85 °C
- Humidity Range: 5 %–95 %
- Shock Resistance: 1500 G during operation
- Vibration Resistance: 20 G
- Certifications: RoHS, CE, FCC, BSMI, VCCI, KC
- Features: NCQ support, TRIM, S.M.A.R.T., ECC enabled
Performance That Powers Everyday Workloads
The ADATA Ultimate SU630 excels in both sequential and random workloads. Its 520 MB/s read speed ensures rapid boot times and swift file transfers, while the 450 MB/s write speed keeps applications responsive during data‑intensive tasks. The drive’s 4 KB random IOPS—40,000 for reads and 65,000 for writes—make it ideal for multitasking environments where numerous small files are accessed simultaneously.
Advanced QLC 3D NAND Technology
QLC (Quad‑Level Cell) 3D NAND allows the SU630 to pack more data into each cell, resulting in higher storage density and lower cost per gigabyte. Despite the inherent endurance trade‑off of QLC, the SU630’s controller and firmware are engineered to mitigate wear, providing a reliable experience for typical consumer workloads.
Compact Design for Space‑Constrained Systems
With a slim 7 mm thickness and lightweight 47.5 g profile, the SU630 fits seamlessly into ultrabooks, thin laptops, and small form‑factor desktops without compromising airflow or adding bulk. Its 2.5″ size is compatible with standard SATA bays found in most PCs and notebooks.
Robust Build for Long‑Term Reliability
The drive’s 1,500,000 hour MTBF rating reflects a design focused on durability. Coupled with ECC (Error Correcting Code), the SU630 can detect and correct data corruption, ensuring integrity over extended periods of use. The inclusion of S.M.A.R.T. monitoring allows users to track health metrics and preemptively address potential issues.
Energy Efficiency for Battery‑Powered Devices
The SU630’s low power draw—only 0.33 W during active operation—helps extend battery life in portable devices. Its efficient design also reduces heat output, contributing to a cooler operating environment and potentially prolonging component lifespan.
Compliance and Environmental Responsibility
Fully compliant with RoHS, CE, FCC, BSMI, VCCI, KC, the SU630 meets stringent environmental and safety standards. This compliance ensures that the drive is free from hazardous substances and safe for use in a wide range of regions.
Ideal Use Cases
- Desktop Upgrades: Replace aging HDDs with a fast, silent SSD to boost system responsiveness.
- Laptop Performance: Enhance boot times and application launch speeds without sacrificing battery life.
- Lightweight Workstations: Provide ample storage for office productivity while maintaining portability.
- Media Editing: Handle large media files with quick read/write capabilities, especially when paired with a higher‑end GPU.
Conclusion
The ADATA Ultimate SU630 480GB SSD combines high throughput, solid endurance, and a sleek form factor into one compelling package. Whether you’re upgrading an older machine or building a new compact system, this drive delivers the performance and reliability needed for modern computing tasks.
Frequently Asked Questions
Q: Does the SU630 support hardware encryption?
A: No, the drive does not include built‑in hardware encryption. Software solutions can be employed if required.
Q: Is TRIM enabled by default?
A: Yes, TRIM is supported and automatically activated when the operating system supports it.
Q: Can this drive be used in a server environment?
A: While designed primarily for consumer use, its durability and SATA interface make it suitable for low‑to‑medium workload servers that do not require enterprise‑grade endurance.
Q: What is the typical lifespan of the SU630 under normal usage?
A: With an MTBF of 1.5 million hours, the drive is expected to last well beyond a decade in typical consumer scenarios.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 88.95 EUR  47.60 ARS  1.25 MXN  29.29 EUR  34.60 CHF  90.43 EUR  57.99 EUR  93.38 EUR  87.67 EUR |
| Colors
Predominant colors of the product |
|
| Tags | Solid State Drive ADATA SU630 ADATA 480Gb Ultimate QLC NAND SSD 2.5" ADATA Ultimate SU630 W 520 480GB SATA Solid W 5 65K IOPS |
| Identifiers | |
| Brand |  ADATA is a Taiwanese electronics company that produces a wide range of computer hardware and storage products. Some of their most popular products include memory cards, USB flash drives, and solid state drives. ADATA is known for their high-quality, reliable products, and they have a large following among computer enthusiasts and professionals. |
| MPN | ADATA ASU630SS-480GQ-R |
| ID | 15183966 |
| Dimensions / Weight | |
| Key Features | |
|
4K Random Read AS SSD The maximum number of input/output operations per second that a storage device can perform when reading data in 4‑KB blocks. This metric indicates how quickly the device can retrieve small, non‑sequential pieces of information and is useful for evaluating performance in database or high‑transaction workloads.
|
40000 IOPS |
| 4K Random Write AS SSD | 65000 IOPS |
|
Case colour The colour or combination of colours that a product’s outer shell or enclosure is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the case for consumers.
|
Black |
|
Certifications A list of formal recognitions, compliance marks, or standards that a product meets. Each entry may be a single certification (e.g., "RoHS") or a group of related certifications separated by commas (e.g., "CE, FCC, RoHS"). The attribute captures all applicable regulatory, environmental, safety, and quality approvals for the item.
|
RoHS, CE, FCC, BSMI, VCCI, KC |
|
Controller The specific model or designation of the hardware controller present in a device, such as a network interface card, storage controller, or other embedded controller. This value identifies the exact component used for managing data flow or peripheral communication, enabling users to compare performance, compatibility and support across products.
|
SMI |
|
Data transfer rates The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.
|
6 Gbit/s |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
69.8 mm |
|
Disk Capacity The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.
|
480 GB |
|
Disk form factor The physical size or shape of a storage disk, indicating the dimensions and mounting format used in computers and other devices. Common values include standard sizes such as "3.5" in., "2.5" in., and form‑factor codes like "M.2 2280" or "mSATA". This attribute helps users identify which drives are compatible with a given enclosure, motherboard, or system.
|
2.5 |
|
Encryption Indicates the cryptographic method or algorithm used to protect data on the device, such as AES, WEP, or other encryption ciphers. The value is a free‑text string that may include the algorithm name and bit length (e.g., "AES 256-bit"), and can be presented in any case or format by the manufacturer.
|
No |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
7 mm |
|
Interface type A list of the physical or logical interfaces that a product can use to connect with other devices or components, such as USB, PCI Express, SATA, M.2, Ethernet, Thunderbolt, and similar standards.
|
SATA |
|
Mean Time Between Failure MTBF The average time interval between successive failures of a product or component, expressed in hours or other standard time units. It indicates the expected reliability and durability of the item under normal operating conditions.
|
1500000 Hours |
|
Memory type The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.
|
QLC 3D NAND |
| Operating humidity | 5 - 95% |
|
Pack quantity The total number of individual units contained within a single package or bundle. This value helps customers understand how many pieces they receive when purchasing the product, and it is useful for inventory, shipping, and comparison purposes.
|
1 |
| Power consumption | 0.33W Active (Typical) |
|
Read speed The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.
|
520 MB/s |
|
Refresh rate The number of times per second that a display updates its image, expressed in hertz (Hz). It indicates the smoothness and responsiveness of motion on the screen; higher rates generally provide a more fluid visual experience.
|
60Hz 2Ms Response Time |
|
Shock operating The mass (in grams) of a component or device that has been tested to withstand shock without failure. This value represents the total weight of the unit, including any internal parts and packaging if specified, and indicates the robustness of the product under impact conditions.
|
1500 G |
|
Solid state drive The total amount of data that can be stored on a solid‑state drive (SSD) installed in the product, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute indicates how much information the device can hold and helps users compare storage options across products.
|
Yes |
|
Warranty The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.
|
2 Years |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
47.5 g |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
100.5 mm |
|
Write speed The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.
|
450 MB/s |
Related articles
