A.B.S 18386 Brake DISCS

A.B.S 18386 Brake DISCS

The A.B.S 18386 Brake DISCS are a premium, OEM‑grade replacement set designed specifically for Subaru vehicles. These discs deliver reliable stopping power, durability, and a quiet braking experience that matches the original factory performance.

Key Features

• High‑Performance Material: Made from a high‑strength cast iron alloy that resists wear and heat buildup, ensuring consistent braking even under demanding conditions.
• Coated Finish: Each disc features a protective coating that reduces dust, prevents corrosion, and extends the life of the brake system.
• Optimal Thickness: Standard thickness of 10 mm, providing a balance between weight and braking efficiency.
• Standard Diameter: 274 mm, matching the original dimensions for a perfect fit on Subaru models.
• Dual‑Piston Compatibility: Designed to work seamlessly with dual‑piston calipers, offering improved braking force distribution.
• Heat Dissipation: The cast iron construction allows for efficient heat dissipation, reducing the risk of brake fade during prolonged use.

Compatibility Overview

The A.B.S 18386 Brake DISCS are engineered to fit a wide range of Subaru models, ensuring that owners can replace their rear brake discs without compromising performance. The following vehicles are confirmed to be compatible:

• Subaru Impreza (GJ, GP, GP2) – 1.6 L engines, rear 12‑to‑17 inch wheel size
• Subaru XV (GP3, GP7) – 1.6 L and 2.0 L engines, rear 12‑to‑17 inch wheel size
• Subaru Forester (SJ, SJ9) – 2.0 L and 2.5 L engines, rear 13‑to‑19 inch wheel size
• Subaru Forester (SJ2.0D) – rear 13‑to‑19 inch wheel size
• Subaru Forester (SJ9 2.5) – rear 14‑to‑19 inch wheel size
• Subaru Forester (SJ 2.0D) – rear 13‑to‑19 inch wheel size
• Subaru Forester (SJ 2.0D) – rear 13‑to‑19 inch wheel size
• Subaru Forester (SJ 2.0D) – rear 13‑to‑19 inch wheel size

All models share the same rear brake disc specifications, making the A.B.S 18386 a universal replacement for these Subaru lines.

Installation Guide

1. Safety First: Secure the vehicle on a flat surface, engage the parking brake, and place wheel chocks behind the front wheels.
2. Remove the Wheel: Use a lug wrench or impact gun to loosen and remove the rear wheel.
3. Access the Caliper: Remove the caliper bolts and carefully slide the caliper away from the disc. Keep the brake hose supported to avoid stress.
4. Remove Old Discs: Unscrew the mounting bolts that secure the old discs and lift them out of the wheel hub.
5. Install New Discs: Place the new A.B.S 18386 discs onto the hub, aligning them with the mounting holes. Tighten the bolts to the manufacturer’s torque specification.
6. Reattach Caliper: Position the caliper over the new discs and secure it with the bolts. Ensure the brake pads are properly seated.
7. Reinstall Wheel: Put the wheel back on, hand‑tighten the lug nuts, lower the vehicle, and torque the lug nuts to spec.
8. Brake Fluid Check: Inspect the brake fluid level and top up if necessary. Bleed the brakes to remove any air pockets.
9. Test Drive: Perform a short test drive to confirm smooth braking and no abnormal noises.

Performance Benefits

• Consistent Stopping Power: The cast iron construction provides a stable braking surface, reducing the likelihood of uneven wear.
• Reduced Dust: The protective coating minimizes brake dust accumulation, keeping the vehicle cleaner and reducing maintenance.
• Longer Lifespan: Corrosion resistance and robust material composition extend the overall life of the brake system.
• Quiet Operation: The discs are engineered to dampen vibration, resulting in a quieter braking experience.
• Heat Management: Efficient heat dissipation prevents brake fade during extended driving or heavy braking scenarios.

Maintenance Tips

• Inspect brake pads and discs every 10,000 km or annually for wear.
• Keep the brake system clean; use a dedicated brake cleaner to remove dust and debris.
• Check for any signs of warping or uneven wear; replace discs if irregularities are detected.
• Ensure brake fluid is fresh and at the correct level; replace it according to the vehicle’s service schedule.

Why Choose A.B.S 18386?

The A.B.S 18386 Brake DISCS combine OEM quality with advanced engineering to deliver reliable, long‑lasting braking performance. Their universal fit for a range of Subaru models makes them an excellent choice for owners seeking a dependable replacement that preserves the vehicle’s original handling characteristics.

By selecting these discs, you invest in safety, durability, and peace of mind for every drive.