ABS 240265 Tie Rod

Overview

The ABS 240265 Tie Rod is a high‑performance steering component engineered for precision and durability. Designed to replace or upgrade the front axle linkage, it delivers consistent handling characteristics across a wide range of driving conditions.

Design and Materials

Crafted from high‑strength alloy steel, the tie rod incorporates advanced heat treatment processes that enhance fatigue resistance and corrosion protection. The internal geometry is optimized to reduce stress concentrations, ensuring long service life even under aggressive cornering loads.

Key Material Attributes

• Yield Strength: ≥ 550 MPa
• Tensile Strength: ≥ 800 MPa
• Corrosion Resistance: Galvanized coating with additional protective paint layer
• Heat Treatment: Case hardening for surface hardness, core toughness balance

Functional Features

The ABS 240265 Tie Rod offers a combination of structural integrity and smooth operation. Its design includes:

• Precision Machining: Tolerances within ±0.02 mm to ensure accurate alignment.
• Integrated Bearing Interface: Compatible with standard ball or roller bearings for reduced friction.
• Threaded End Design: Standard M10 x 1.5 threading, facilitating quick assembly with existing hardware.

Compatibility

This component is engineered to fit a broad spectrum of vehicles and aftermarket applications. It is commonly used in:

• Suzuki front axle assemblies (Vanguard, Jimny, etc.)
• Other Japanese and European models requiring an ABS 240265 Axial Joint
• Custom chassis builds where a robust tie rod is essential.

Installation Compatibility Matrix

Installation Guide

The following steps outline a typical installation procedure for the ABS 240265 Tie Rod:

1. Preparation: Remove the existing tie rod by loosening the steering knuckle bolts and disconnecting the steering linkage.
2. Alignment Check: Verify that the new tie rod length matches the required offset. Adjust if necessary using a calibrated shimming kit.
3. Mounting: Insert the tie rod into the steering knuckle, ensuring proper seating of the bearing interface.
4. Tightening Sequence: Follow the manufacturer’s torque specifications: first 20 Nm on the knuckle bolts, then 30 Nm on the tie rod end bolt.
5. Steering Test: Rotate the steering wheel through a full range and inspect for play or binding. Adjust as needed.

Maintenance Recommendations

To preserve optimal performance, adhere to these maintenance practices:

• Periodic Inspection: Check for wear on the bearing interface every 10,000 km.
• Lubrication: Apply a high‑temperature grease to the joint bearings during each service interval.
• Cleaning: Remove dirt and debris from the threaded ends before reassembly to prevent galling.

Performance Benefits

The ABS 240265 Tie Rod enhances vehicle dynamics in several key areas:

• Improved Steering Precision: Reduced play leads to sharper response and better feedback.
• Enhanced Durability: Heat‑treated alloy resists fatigue, extending component life beyond standard OEM parts.
• Consistent Handling: Stable geometry maintains tire contact patches during cornering, improving traction.

Technical Specifications

Conclusion

The ABS 240265 Tie Rod stands out as a reliable, high‑quality steering component suitable for both OEM replacement and aftermarket enhancement. Its robust construction, precise engineering, and broad compatibility make it an ideal choice for drivers seeking superior handling performance without compromising durability.