ABS 9220 Brakeshoe Set

ABS 9220 Brakeshoe Set

The ABS 9220 Brakeshoe Set is a high‑performance parking brake assembly designed for rear‑wheel vehicles that require reliable and durable stopping power when the vehicle is stationary. This kit includes all essential components needed to replace worn or damaged handbrake shoes, ensuring optimal safety and compliance with manufacturer specifications.

Key Components

• Brake Shoes (Shoe Pair): Precision‑milled from high‑friction composite material that resists wear and heat buildup. Each shoe is engineered to fit the ABS 9220 geometry, providing a snug contact surface with the brake drum.
• Handbrake Lever Assembly: A robust lever mechanism that translates driver input into mechanical force applied to the shoes. The lever is constructed from hardened steel and features a smooth pivot for effortless operation.
• Adjustment Screws & Springs: Integrated adjustment screws allow fine tuning of shoe clearance, while calibrated springs maintain consistent pressure across varying load conditions.
• Installation Hardware: Includes all necessary bolts, nuts, washers, and mounting brackets required for a secure fit. All fasteners are corrosion‑resistant to withstand harsh operating environments.

Material & Construction Quality

The ABS 9220 Brakeshoe Set is built using advanced high‑temperature resistant composites combined with steel reinforcement. This hybrid construction delivers:

• Superior wear resistance, extending service life by up to 30% compared to standard brake shoe assemblies.
• Consistent friction coefficient across a wide temperature range (–40 °C to +120 °C), ensuring reliable braking performance in both cold and hot climates.
• Reduced weight, which contributes to lower unsprung mass and improved vehicle dynamics.

Compatibility & Vehicle Coverage

The ABS 9220 Brakeshoe Set is engineered for a broad range of rear‑wheel vehicles. It is specifically designed to fit the following models:

• Chevrolet: Lacetti, Epica, and other compact/compact‑sedan platforms.
• DaeWoo: Evanda, K3, and related models with rear‑wheel drive.
• Dodge: Various light commercial and passenger vehicles that employ the ABS 9220 handbrake system.
• Additional compatibility with other manufacturers that use the same ABS 9220 geometry, such as Suzuki and Ganasce platforms.

All models share a common rear‑wheel brake drum diameter of approximately 170 mm, which aligns perfectly with the shoe dimensions in this kit. The set is also suitable for aftermarket modifications where the original handbrake shoes have been replaced or upgraded.

Installation Procedure

Installing the ABS 9220 Brakeshoe Set involves a systematic approach to ensure safety and performance:

1. Preparation: Secure the vehicle on jack stands, remove the rear wheels, and access the brake drum assembly.
2. Removal of Old Shoes: Detach the existing handbrake shoes by loosening the mounting bolts. Carefully note the orientation of the springs and adjustment screws for reassembly.
3. Mounting New Shoes: Position each new shoe onto the drum, aligning it with the pre‑drilled holes. Fasten using the supplied bolts and torque to manufacturer specifications.
4. Spring & Lever Adjustment: Install the springs and adjust the lever tension via the adjustment screws until the shoes make light contact with the drum when the handbrake is released.
5. Testing: Engage the handbrake manually to confirm that the shoes clamp firmly against the drum without excessive drag. Verify that the vehicle remains stationary when the brake is applied.
6. Final Checks: Reinstall wheels, lower the vehicle, and perform a short test drive to ensure smooth operation of both the parking brake and the main braking system.

Performance Benefits

• Enhanced Safety: The high‑friction material provides reliable stopping power even under heavy load or adverse weather conditions, reducing the risk of vehicle roll‑over during parking.
• Longevity: Durable construction means fewer replacements over the vehicle’s lifespan, translating to lower maintenance costs.
• Consistent Feel: The integrated springs and precise adjustment mechanism deliver a consistent handbrake feel across all operating temperatures.
• Compatibility with ABS Systems: Designed to work seamlessly alongside modern anti‑locking brake systems, ensuring that the parking brake does not interfere with active braking functions.

Maintenance & Inspection Guidelines

Regular inspection of the handbrake system is essential for maintaining safety:

• Check shoe wear every 10,000 km or after any significant impact event.
• Inspect springs and adjustment screws for corrosion or deformation.
• Verify that the lever mechanism moves smoothly without binding.
• Ensure that the brake drum surface remains free of dents or scoring that could affect shoe contact.

Adhering to these guidelines guarantees that the ABS 9220 Brakeshoe Set continues to perform at peak levels throughout its service life.

Conclusion

The ABS 9220 Brakeshoe Set represents a blend of engineering precision, material excellence, and broad vehicle compatibility. Whether you are restoring an older Chevrolet or maintaining a DaeWoo commercial vehicle, this kit delivers reliable parking brake performance that meets the demands of modern driving conditions.

By choosing the ABS 9220 Brakeshoe Set, owners invest in safety, durability, and peace of mind—ensuring that every stop is controlled, predictable, and dependable.