Bilstein 22 – 239273 Shock Absorber

Bilstein 22‑239273 Shock Absorber

The Bilstein 22‑239273 is a high‑performance gas‑charged shock absorber designed for the front right suspension of Ford Fiesta models, including the VI generation and various regional variants. It delivers superior damping characteristics, improved ride comfort, and enhanced handling stability under both normal driving conditions and spirited performance sessions.

Key Technical Specifications

• Model Compatibility: Ford Fiesta (VI), Fiesta 6, Fiesta 6 Van, and related chassis variants across North America, Europe, and Asia.
• Position: Front right (Vorne Rechts / Vorne Rechts) – the counterpart for the left side is the identical part number with a mirrored designation.
• Type: Bilstein B4 series gas shock absorber featuring a sealed, high‑pressure nitrogen chamber.
• Construction: Heavy‑duty steel housing with reinforced mounting brackets to withstand aggressive cornering forces.
• Damping Characteristics: Progressive damping curve that adapts from soft ride at low speeds to firm resistance during hard braking or rapid acceleration.
• Length & Diameter: Standard B4 dimensions (approx. 12.5 inches length, 2.25 inch diameter) compatible with OEM mounting hardware.

Performance Benefits

The Bilstein 22‑239273 shock absorber is engineered to:

• Reduce Body Roll: By maintaining consistent tire contact, it improves lateral grip during cornering.
• Enhance Braking Stability: Firm damping reduces wheel hop and keeps the vehicle planted when braking hard.
• Improve Ride Comfort: The progressive curve absorbs road imperfections without compromising handling.
• Extend Component Life: Gas‑charged design minimizes internal corrosion, ensuring long‑term reliability.

Installation Overview

Installing the Bilstein 22‑239273 is a straightforward process that can be completed with standard automotive tools. The following steps outline the procedure:

1. Preparation: Secure the vehicle on jack stands and remove the wheel on the side where the shock will be replaced.
2. Remove Old Shock: Detach the upper mounting bracket, then unbolt the lower mounting point. Carefully slide the old shock out of its housing.
3. Position New Shock: Align the new Bilstein shock with the mounting points. Ensure that the gas port is oriented correctly to avoid damage during installation.
4. Tighten Mounts: Secure the upper bracket and lower bolt to the specified torque settings (typically 80–90 lb‑ft, but consult OEM service manual).
5. Reassemble Wheel & Lower Suspension Components: Reinstall the wheel, lower control arm bushings, and any other removed parts.
6. Test Drive: Perform a short drive to verify proper operation. Listen for unusual noises and confirm that the vehicle handles as expected.

Compatibility Across Regions

The Bilstein 22‑239273 is marketed under several language-specific names, reflecting its global availability:

• German: Bilstein 22‑239273 Stoßdämpfer
• Italian: Bilstein 22‑239273 Ammortizzatore
• Spanish: Bilstein 22‑239273 Amortiguador
• Danish: Støddæmper Bilstein 22‑239273
• French: Amortisseur Bilstein 22‑239273
• Portuguese: Ammortiguador BILSTEIN 22-239273

Despite the varied nomenclature, each designation refers to the same high‑quality shock absorber engineered for Ford Fiesta front suspension systems.

Why Choose Bilstein?

• Reputation: Bilstein is a leading name in automotive suspension technology, known for rigorous testing and durable components.
• OEM‑Approved: The B4 series is an official OEM replacement part, ensuring that performance matches or exceeds factory specifications.
• Aftermarket Support: Extensive documentation, installation guides, and community forums provide assistance for both novice mechanics and seasoned professionals.

Maintenance Tips

While the Bilstein 22‑239273 is designed for longevity, regular inspection can further extend its life:

• Check for oil leaks around the mounting points every few thousand miles.
• Inspect the shock body for dents or cracks that could compromise gas pressure.
• Replace any worn bushings or control arm components to maintain proper alignment.

Conclusion

The Bilstein 22‑239273 Shock Absorber exemplifies precision engineering tailored for the Ford Fiesta front suspension. Its gas‑charged, progressive damping design delivers a balanced blend of comfort and performance, making it an ideal choice for drivers seeking reliable handling without sacrificing ride quality.