Skip to content
Comparor Shopping ExperienceMake informed choices

Bosch 0258010024 Lambda Sensor

Oxygen sensor for exhaust systems, measuring O2 levels with 4 poles for accurate readings.

Sponsored This site contains affiliate links for which we may receive compensation. More information

Overview of the Bosch 0258010024 Lambda Sensor

The Bosch 0258010024 Lambda Sensor, also known as the LS10024 Oxygen O2 Exhaust Probe, is a high‑performance lambda sensor designed to monitor exhaust gas composition in internal combustion engines. It delivers precise oxygen measurements, enabling the engine control unit (ECU) to maintain optimal air–fuel ratios for maximum efficiency and reduced emissions.

Key Features

  • 4‑pole design – Provides a stable electrical connection and reduces signal noise.
  • High temperature tolerance – Operates reliably in exhaust temperatures up to 800 °C.
  • Fast response time – Detects changes in oxygen levels within milliseconds, essential for real‑time fuel management.
  • Durable construction – Made from high‑grade ceramic and metal components that resist corrosion and thermal shock.
  • Compact size – Fits seamlessly into the exhaust manifold of compact cars without requiring modifications.

Technical Specifications

ParameterValue
Model Number0258010024 / LS10024
TypeLambda (Oxygen) Sensor – 4‑pole
Operating Temperature Range-40 °C to +800 °C
Response Time≤ 0.5 s at 600 °C
Signal OutputAnalog voltage (0–1 V)
Mounting TypeThreaded – compatible with standard exhaust manifolds
MaterialCeramic core, stainless steel housing
Weight≈ 0.15 kg

Compatibility and Applications

The sensor is specifically engineered for the Mitsubishi Lancer VIII Sportback, including models with the 1.5‑liter 80 kW engine (code 1588A195). It also fits a range of Mitsubishi vehicles such as:

  • LANCER VIII (CY_A, CZ_A) – 2010 and later
  • FORTIS series
  • EX GALANT models
  • Other Lancer variants with similar exhaust layouts

Its universal 4‑pole design allows it to be used in other vehicles that require a standard lambda sensor, provided the mounting dimensions match.

Installation Guide

  1. Preparation: Ensure the engine is cool and disconnect the battery to prevent accidental short circuits.
  2. Remove old sensor: Use a socket wrench to unscrew the existing lambda probe from the exhaust manifold. Keep the mounting flange clean.
  3. Install new sensor: Align the threaded end of the Bosch 0258010024 with the manifold opening, then tighten securely using a torque wrench set to the manufacturer’s specification (typically 10–12 Nm).
  4. Reconnect wiring: Attach the sensor’s connector to the ECU harness. Verify that the connector is seated fully and that no pins are bent.
  5. Check for leaks: After reassembly, start the engine and inspect the area around the sensor for any exhaust gas leakage.

Performance Benefits

  • Improved Fuel Economy: Accurate oxygen readings allow the ECU to fine‑tune fuel injection, reducing consumption by up to 5% in optimal conditions.
  • Lower Emissions: Maintaining a stoichiometric air–fuel ratio minimizes CO and HC emissions, helping vehicles meet stringent environmental regulations.
  • Enhanced Engine Longevity: By preventing rich or lean running conditions, the sensor protects catalytic converters and other exhaust components from damage.
  • Reliability in Harsh Environments: The robust ceramic core withstands high temperatures and vibration, ensuring consistent performance over many years.

Troubleshooting Common Issues

SymptomPossible CauseSolution
Engine runs rich or leanFaulty sensor outputTest voltage with a multimeter; replace if outside spec.
Check Engine Light (CEL) illuminatedSensor misreading detected by ECUScan for diagnostic codes (P0135, P0136); verify wiring and connector integrity.
Excessive exhaust temperature readingsImproper mounting or damaged sensorInspect mounting flange; replace if cracked.

Maintenance Tips

  • Regularly inspect the wiring harness for corrosion, especially in coastal or high‑humidity regions.
  • Avoid using abrasive cleaners on the sensor housing; a soft cloth with mild soap is sufficient.
  • If the vehicle operates in extreme conditions (e.g., racing), consider periodic checks of sensor calibration against a reference device.

Conclusion

The Bosch 0258010024 Lambda Sensor delivers reliable, high‑precision oxygen measurement essential for modern engine management systems. Its robust construction, fast response, and proven compatibility with Mitsubishi Lancer VIII models make it a trusted component for maintaining optimal performance, fuel efficiency, and emissions control.

This product in Comparor

CategoryThis product is cataloged in our store in these categories
InternationalFind this product in one of our international stores
ColorsPredominant colors of the product
Tags
Lambda SensorLambda Sensor OxygenLambda Sensor Exhaust ProbeLambda Sensor O2Lambda sensor Oxygen probeLambda sensor O2 probeLambda sensor probeLambda sensor exhaustLambda sensor four polesLambda sensor poleLambda sensor mitsubishiLambda sensor lancer serie r viiiLambda sensor lancer sportbackLambda sensor for mitsubishiLambda sensor for lancer sportbackLambda sensor ls10024Lambda sensor series r viii

Identifiers

Brand
Bosch Bosch is a brand of power tools and appliances. The company was founded in 1886 and produces a wide range of power tools, appliances, and accessories. Bosch tools are known for their quality and durability, and the company is a leader in innovation and design.
MPN
Bosch 0258010024
Model
Bosch 0258010024
ID
7006065
Comparor · Email address

Comparor Daily

Verified deals and the latest news, every day.

🤖 Hello! I can help you choose what you need, answer product questions and find offers. What are you looking for?
AI shopping assistant using Comparor’s catalogue. AI may make mistakes; check the offer details before buying.
Comparor AI BETA 2.0
Online
Restart the conversation?