Electrical installation (Cable Length 20 m)
Active Filters
Cable Length 20 m
Suggestions for Electrical installation (Cable Length 20 m)
Level Heat gun Hole saw Wire nut Cable lug Cable tie Drill bit Fish tape Cable clip Multimeter Nut driver Wire gauge Cable clamp GFCI tester Screwdriver Stud finder Wire cutter Cable cutter Cable puller Conduit body Hammer drill Tape measure Crimping tool Torque wrench Utility knife Wire stripper Cable stripper Circuit tester Conduit bender Conduit cutter Electrical box Soldering iron Terminal block Voltage tester Wire connector Bosch drill bit Conduit fitting Crimp connector Grounding clamp Milwaukee drill
Wago L-Boxx Mini Installer Selection Case, 887-960. A compact organizer with 195 pieces, including push-in terminals and connectors for efficient wire management in electrical projects. Suitable for DIY enthusiasts and professionals alike.
Yellow WAGO 2000‑1306 feed‑through terminal block offers a compact 3.5 mm width and 58.2 mm height, handling up to 13.5 A at 800 V. It supports three wires with diameters from 0.14 mm to 1.0 mm, ideal for reliable connections in moderate‑temperature environments.
Surge Protector 110...240VAC, LED and Varistor Module, Finder FIN 99.02.0.230.98, Compatible with Finder 90.02, 90.03, 92.03, 94.03
Securely connect low‑voltage circuits with the Wieland ST 16‑2 BS plug‑in connector, rated for 48 V and 25 A, featuring a 1.8–6.2 mm cable range, copper‑zinc contacts, IP20 protection, and integrated strain relief in a durable polyamide housing.
Discover the Schneider Electric TeSys VZ12, a versatile auxiliary contact block featuring one normally open and zero normally closed contacts. Ideal for neutral conductor modules in electrical systems.
Discover the WAGO 773-602 Push-in Wire Connector: a reliable solution for 2-conductor terminals. Ideal for connections ranging from 1.5 to 4 mm², this connector ensures secure and efficient electrical wiring with easy installation.
Nylon cable ties in various colors with stripping pliers for organization and management of cables.
Digitus CAT 6, Class E High Denisity Patch Panel, 24-ports, black, 0.5 U, shielded, for networking purposes in a compact size and high durability
This feed-through terminal block is designed to provide a reliable connection between conductors in electrical circuits. With a 3.5mm pitch and rated for 17.5A of current, it offers excellent performance and durability.
The Steca Solsum 0808 is a solar charge controller that regulates the voltage and current coming from the solar panels to protect your battery bank.
Discover the precision of Schneider Electric's XB4BD912R10K potentiometer. Designed for seamless integration with control devices, this single piece ensures accurate and reliable performance in your electrical systems.
A compact A4 plastic pocket with a 40 mm depth made of durable polystyrene in light gray (RAL 7035) securely holds wiring diagrams, keeping them protected, neatly organized, and easily accessible within any cabinet or workspace.
Orange end/partition plate set for WAGO 2000 terminal blocks, 25 units each with a 0.7 mm thick profile that ensures secure mounting and easy cable management in industrial control panels.
A compact hollow wall junction box with a 68 mm diameter opening and 47 mm depth, designed for ceiling light connections. It features M5 threaded screws for secure mounting, IP3X protection, and is suitable for 20 mm pipe diameters.
A flush‑mounted 95 mm round cover with a robust spring lock keeps boxes or circuit boards securely closed, offering a tidy, tamper‑resistant finish without the need for screws.
A compact, 2‑pin fixed bridge (FBS 2‑5) designed for Phoenix Contact terminal blocks and plug‑in connectors. It provides a reliable cross‑connection with a 5.2 mm pitch for easy installation in industrial control panels.
CLIPFIX 15 is an end clamp designed to securely fasten terminal blocks on DIN rails. Made of high-quality plastic, it comes in a set of 50 pieces and is compatible with Phoenix Contact's rail mounting systems.
Elegant aluminium desk strip featuring four Schuko outlets in a shiny, rectangular chassis suitable for direct wall installation. The anodised surface delivers a modern look while providing sturdy power distribution without any cover or switch.
Schneider Electric XB5AG21 is a black key-operated switch with a Harmony XB5 design. It features 22mm mounting and a latching mechanism in the 1NO/0NC configuration, offering secure, controlled access through two positions.
3-pin Schaltend - At cable drum with integrated thermal protection): Schuko solid rubber right angled connector with 2x systems according to CEE NORM7/VII, 3x EU Schuko sockets with folding cover - Cable: H07RN-F, f3g1,5 mm² approximately 15 m - Type o
The KDS 116 is a wired extractor hood controller that allows you to easily control the speed and operation of your exhaust fan. It features a simple push-button interface and can be mounted on the wall for convenient access.
Super bright assorted LEDs - Crystal clear Lens illuminates with colour when powered - Low power consumption and long lifespan - Suitable for environmental and task lighting - Application includes DIY project, electronics experiment, teaching, repairing L
Proxxon 24104 device Drilling and Milling PF 230
LS Wall connection panel/Material: Plastic - 2 banana with additional screw fastening - Hole-to-hole distance 60 mm - Outer dimensions: 85 x 85 mm
Can be sub-divided using inserts - Colour: Blue - Made of polypropylene
Nylon Draw Tape for low friction and high strength during cable pulling applications Flexible head attachment for navigating conduit with multiple bends Red coloured tape for improved visibility in conduit with existing cables Robust
(4040849703621 / 70362)
Wago 773-106 transparent push wire connector, accommodating up to 6 wires for solid or stranded conductors. Suitable for indoor and outdoor use, with a maximum temperature range of -40°C to 105°C. Easy installation with no tools required.
Wago series 773 8 way transparent solid & stranded push wire connector Connect 8 cables Colour: Dark Grey