Terminals & Kits

The WAGO 243-212 Light Gray-Yellow Bus Coupler Terminal is designed for efficient electrical connections, featuring a compact design that accommodates cables with a diameter of 0.6 to 0.8 mm. With a nominal current of 6 A and a voltage rating of 100 V, this terminal ensures reliable performance in various applications. Each pack contains 50 pieces, making it ideal for both professional and DIY projects. Its direct mounting capability simplifies installation, providing a secure and stable connect

The WAGO 280-314 Gray Terminal Block End/Partition Plate set includes 100 pieces designed for direct mounting applications. These plates ensure secure and organized connections within terminal blocks, enhancing electrical safety and efficiency. Their robust gray construction provides durability and a professional appearance, making them ideal for various electrical projects.

This insulated cross connector handles 24 A and is 5 mm wide, with a grey housing rated up to 800 V, making it ideal for secure, compact connections in terminal block assemblies.

PT 2.5-3L is a push-in multi-level terminal block with 5.2mm pitch, suitable for wire sizes 0.14-4mm². Made of grey PIT material by Phoenix Contact. Nominal voltage up to 500V and current capacity up to 20A.

A robust multilevel installation terminal designed for 2.5 mm² conductors, featuring a slide‑link (N) connection system, N‑type disconnecting capability, and a durable grey housing suitable for floor or panel mounting.

Discover the WAGO 2002-1407 Ground Terminal Block: A versatile 1-pole terminal block designed for a 5.2 mm pull spring configuration. Rated at 24A and compatible with 2.5mm² wire, this yellow/grey terminal ensures secure connections.

Securely connects two conductors up to 2.5 mm² with a 24 A rating. The 5.2 mm DIN rail mount offers compact, color‑coded green/yellow terminals for reliable earth grounding in industrial circuits.

The Phoenix Contact PT 2,5 feed-through terminal block is a 5.2mm quick-connect grey terminal with 24A capability designed for reliable connections in various applications.

A durable ground terminal block with a 5.2‑mm width and 100.9‑mm height, operating from –60 to +105 °C and rated at 400 V, designed for secure protection conductor connections in industrial setups.

A bright orange, 1 mm thick end and partition plate for WAGO terminal blocks, designed for direct mounting. It provides a clean separation between terminals, ensuring secure cable management and easy maintenance in compact electrical panels.

The UT 6-PE is a green and yellow ground terminal block for 0.2 to 6mm² conductors, with a one-piece design and 8.2mm spacing between terminals. It is suitable for various applications and provides reliable protection against electrical hazards.

Compact blue feed‑through terminal block with 8.2 mm bore, rated for up to 41 A and compatible with 0.2–10 mm² conductors, offering secure screw clamping and easy cable routing in industrial panels.

Blue feed‑through terminal block with a 6.2 mm bore, rated for 32 A and accommodating conductors from 0.14 mm² to 6 mm². It features a screw clamp for secure attachment, making it ideal for DIN rail installations and reliable signal routing.

Blue WDU 6 BL feed‑through terminal block, 8 mm screw connection, 41 A/800 V rating, single row with two clamps, side mounting, UL 94 V0 rated insulation, ideal for DIN rail assemblies.

Blue feed-through terminal block with a 5.2 mm width, 48 mm height, and 47.7 mm depth, rated for 24 A up to 105 °C and down to –60 °C, ideal for compact wiring harnesses needing reliable screw‑clamp connections.

WAGO 770-103 - WINSTA® MIDI, 3-pin female connector with strain relief housing and plug-in installation capability, compatible with 3x4mm² wiring.

A compact DIN rail terminal block with a 5.2 mm width and 48 mm height, designed for 24‑ampere connections. It supports conductors from 0.14 to 4 mm², operates between –60 °C and 105 °C, and tolerates up to 1000 V.

A compact 5‑pin bridge for UT2.5/ST2.5/QTC1.5 terminals, rated up to 24 A and 800 V. It offers a reliable, insulated cross‑connection with a 5.2 mm pitch, ensuring secure, low‑loss signal transfer in industrial circuits.

Securely bridge up to five terminals with WAGO 780‑455, a two‑pole insulated cross‑connector designed for terminal blocks. Its compact box‑bridge layout offers reliable isolation and easy installation, ideal for industrial control panels and simplified cable management.

Dual‑shelf feed‑through terminal block for 2.5 mm² conductors, rated 24 A, featuring Klippon® Connect screw terminals in beige. Compact 5 mm pitch, ideal for tight panel mounting and reliable signal routing.

Compact blue feed‑through terminal block with a 5.2 mm width and 48.5 mm depth, rated for 24 A at 800 V. It accepts conductors from 0.25 to 2.5 mm², making it suitable for DIN rail mounting in electrical panels.

Discover the WAGO 2002-1304 feed-through terminal block: a versatile 3-conductor solution rated at 24A, ideal for wires 0.25 to 2.5 mm². Made of durable blue material, it provides easy wire connections with its 5.2mm design.

The WAGO 2002‑410 is a 10‑slot push‑in jumper bar with a 5.2 mm pitch, rated for 800 V and up to 25 A per contact. Its insulated terminals provide fast, reliable wiring in tight control panel spaces.

Secure two conductors up to 16 mm² with this 12‑mm grey WAGO feed‑through block, rated 76 A and 105 °C. Compact 70 mm depth, easy DIN rail mounting, reliable push‑in connection.

Wago Compact Push Wire® Connector 8-Conductor Terminal Block Housing - 2273-208: Flexible screw terminal with 8 pins for wires 0.5-2.5 mm²; Transparent and light grey color; Contains 50 pieces.

A robust gray feed‑through terminal block with a 6.2 mm screw head, rated for 32 A and supporting conductors from 0.14 to 6 mm². Its compact design fits DIN rails up to 35 mm wide, offering secure, low‑resistance connections in industrial wiring systems.