Terminals & Kits
Suggestions for Terminals & Kits
Lever nut Lug terminal Terminal kit Barrier strip Ring terminal Wire terminal Cable terminal Crimp terminal Earth terminal Screw terminal Spade terminal Terminal block Terminal strip Faston terminal Ground terminal Solder terminal Splice terminal Barrier terminal Push-in terminal Euroblock terminal Insulated terminal PCB terminal block Push-in wire terminal Spring clamp terminal Non-insulated terminal DIN rail terminal block Terminal block accessory Quick disconnect terminal Multi level terminal block Four-position terminal block Three-position terminal block
Secure three-wire connections with the WAGO 2001‑1305 feed‑through terminal block. Its 4.2 mm spring clamp accepts conductors from 0.25 to 1.5 mm, delivering up to 18 A per contact in a compact black housing.
Securely route three conductors with the WAGO 2001‑1303 feed-through block, featuring a 4.2 mm spacing and an 18A rating; its spring-loaded design accommodates wire diameters from 0.25 to 1.5 mm for quick, reliable connections.
The Weidmüller A2T 2.5 is a dual port feed-through terminal block with a 5.1mm pitch and can handle up to 24A of current. It comes in beige and is part of the Klippon Connect A-Series family of products.
Securely connect grounding conductors with the PT 16‑TWIN N‑PE terminal block, featuring a single-pole 12.2 mm slot and green‑yellow identification for clear polarity. Durable metal housing ensures reliable continuity in industrial circuits.
A compact neutral disconnect terminal block with a 5.2 mm contact gap, designed for 0.14‑4 mm² conductors. It offers secure isolation, blue housing, and easy mounting in control panels.
A robust 6.2 mm feed‑through terminal block rated for 32 A, featuring a compact twin‑pin design that ensures secure connections and reliable continuity in industrial circuits.
PT 2.5-3L is a push-in multi-level terminal block with 5.2mm pitch, suitable for wire sizes 0.14-4mm². Made of grey PIT material by Phoenix Contact. Nominal voltage up to 500V and current capacity up to 20A.
Securely connect three conductors with a 7 mm terminal block featuring a pull‑spring and PE connection, ideal for sensor or actuator wiring in industrial control systems.
Securely connect 2.5 mm² grounding conductors with a green‑yellow push‑in terminal block featuring a spring‑loaded feed‑through design for quick, reliable attachment and easy maintenance.
Securely mount up to five conductors with the PTI 4‑PE/L/L terminal block, featuring a 6.2 mm spring clamp and a 27 A rating for reliable earth connection in industrial installations.
A robust gray push‑in terminal block with four poles and a 6.2 mm contact width, ideal for motor connections. Each unit features secure screwless mounting, compact dimensions, and high current capacity, supplied in a pack of fifty.
Securely connect grounding conductors with this green‑yellow PT 6‑TWIN‑PE terminal block, featuring a 1‑pole, 8.2 mm push‑in design that accepts 0.5–10 mm² cables for reliable earth bonding in industrial wiring systems.
Securely mount a 20‑amp circuit with this 5.2 mm wide PTI installation terminal block, rated from –60 °C to +105 °C, offering reliable grounding connections for industrial setups.
The PTN 16/S N‑disconnect terminal block features a compact 10.2 mm width and a single pole design that delivers secure wire termination with spring‑loaded contacts for reliable connectivity and effortless isolation in industrial control panels.
Compact grey feed-through terminal block delivers 13.5 A capacity with a 3.5 mm pitch, accommodating conductors up to 1 mm². Two positions offer secure push‑in connections, ideal for DIN rail mounting and reliable signal routing.
A compact beige feed‑through terminal block with a 5.1 mm slot, rated for 24 A and 2.5 mm² conductors. It offers secure push‑in connections, spring‑loaded retention, and easy cable routing in tight spaces.
A robust blue feed‑through terminal block with a 12.2 mm pitch and 76 A rating, featuring dual N-type contacts for reliable continuity in industrial control panels.
A robust gray PTI 4‑L/L terminal block from Phoenix Contact, rated for 400 V and 32 A. It features a 6.2 mm push‑in design with spring‑loaded contacts, ideal for 0.2–6 mm² cables on a 35 mm DIN rail.
A robust blue double‑deck feed‑through terminal block with a 5.2 mm pitch, rated for 20 A. It offers secure wire connection and easy mounting in compact panels, ideal for industrial control circuits.
Compact 2‑pole feed‑through terminal block with 1.5 mm² contacts, rated 17.5 A and 450 V. Blue housing, spring‑loaded terminals provide secure connections, ideal for panel mounting.
Feed-through terminal block with 5.1mm connection and 24A current rating, beige color, for reliable connections.
Filters