Hardware TIMco
Active Filters
TIMco
Suggestions for Hardware TIMco
Drill Chisel Hammer Jigsaw Mallet Pliers C-clamp Crowbar F-clamp Handsaw Hex key Pry bar Rip saw Scraper Back saw Hole saw Nail gun Nail set Bar clamp Drill bit Miter saw Screw gun Spade bit Chalk line Driver bit Nut driver Pipe clamp Try square Belt sander Brad nailer Claw hammer Cold chisel Laser level Masonry bit Putty knife Screwdriver Staples gun Stud finder Tile cutter Wood chisel
Countersunk machine screws with pozi drive, bright zinc plated for corrosion resistance, in M4 size and 40mm length.
These 5mm x 75mm yellow zinc‑plated screws feature a precision countersunk head for smooth finishes, Pozidriv drive ensures secure torque, ideal for wood and chipboard assemblies.
Discover the reliability of Solo Countersinking Pozi Wood Screws, designed for seamless installation in wood projects. This pack includes 200 screws, each measuring 5mm x 70mm, featuring a double countersunk design for a flush finish and enhanced grip.
These 5 mm × 90 mm Pozi wood screws feature a double‑countersunk head for flush installation, a sharp tip for easy drilling into timber or chipboard, and a zinc‑coated shaft that resists corrosion while maintaining a bright gold finish.
Discover durable and corrosion-resistant M16 Zinc Plated Carriage Bolts with matching hex nuts. These robust fasteners are perfect for construction projects, offering a reliable solution in a convenient pack of ten.
Timco Drywall Screws are fine threaded, black phosphate coated with a bugle head, ideal for drywall applications. The screws come in a box of 200 pieces and measure 4.2mm x 65mm.
Timco drywall screws feature fine thread and black phosphate coating for improved corrosion resistance. These bugle head screws measure 3.5mm x 45mm and come in a box of 1000.
Timco drywall screws feature a fine thread and black phosphate coating for increased durability and rust resistance. These 4.2mm x 75mm screws are designed with bugle heads, making them ideal for fastening sheetrock or other lightweight materials.
Hex Head Self Drilling Screws for light section steel, with a diameter of 5.5mm and length of 25mm, packed in a set containing 140 pieces.
Hex Head Self Drilling Screws for Light Section Steel, 5.5mm x 32mm, pack of 100. Suitable for attaching light steel sections.
Dense Board Screw Black Phos: A pack of 1000 dense board screws, featuring a 3.9mm diameter and 30mm length, coated with black phosphate finish for durability and corrosion resistance. Suitable for drywall installation.
Hex head countersunk with a fixed washer - Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012 - Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosi
Flat countersunk concrete screws with a yellow finish, 7.5mm in diameter and 60mm long, for anchoring into concrete.
Flat countersunk concrete screws with a yellow finish, 7.5mm in diameter and 50mm in length.
Copper straps, ideal for use with slates and shingles - Presented in the handy resealable TIMbag - Copper
Lubricated for quicker insertion speed - 40 degree deep single thread provides a secure fixing with high pull-out resistance - A 25 degree sharp point assists with easy penetration - Fully threaded up to 70mm, partially threaded thereafter
Discover the durability and versatility of Timco's Form A Washers, made from high-quality zinc. Ideal for clamping, spacing, and fixing applications, these washers ensure secure fastening with consistent performance.
Paper collated nails with T Head to give concealed fixings and a diamond point head for maximum penetration - 20 degree collation angle - Electro galvanised plating, suitable for indoor applications
TIMco (5055893325773 / ZL19W16)
Collated nails with T Head to give concealed fixings and a diamond point head for maximum penetration20 degree collation angle A2 Stainless Steel for high levels of corrosion resistance and use in hardwood2 x Fuel cell included
Suitable for most modern homes with plasterboard / dot & dab walls - Trusted and independently tested - Fast installation, no specialist tools required, drill, 10mm bit, hammer & screwdriver - For all wall types, brick, block and light weight concrete
Metal speed plug with screw - Suitable for use light duty applications into plasterboard - Cross recess head
Red plastic wall plugs, 30 mm long and 5.5 mm diameter, perfect for mounting lightweight fixtures. Each box contains 100 sturdy, corrosion‑resistant plugs that fit standard masonry holes and provide a reliable anchor point.
Heavy duty cavity wall anchor including 10 x 40mm and 10 x 60mm screws. - Quick and easy to install offering the most effective fix into hollow walls such as plasterboard or drywalls. - Covers a range of wall thicknesses up to 45mm and support up to 30kg
TIMco GEC13B Galvanized ELH Clout Nails are extra large head nails made of galvanized steel, with a length of 13mm and diameter of 3.00mm. They come in a 1kg bag for easy use and are ideal for a variety of applications.
TIMco (5055331832665 / BLPLUG)
TIMco (5055017520916 / BPLUG) - Weight: 0.0000
For use in plasterboards for securing light duty fixtures Serrated edges for easy hammering into plasterboard Fixing expands on tightening the screw Screws also included
For lighty duty applications in all kinds of plasterboard Cross recess head Simple installation with a screw driver
Protective vinyl coating Four dial combination lock Ideal for machinery, bikes and ladders.
Black nylon cover Hardened steel8mm Square links
M12 hexagon set screws and nuts with zinc plating, pack of 23, for durable and rust-resistant connections.
High-quality hexagon set screws and nuts with zinc plating, available in various sizes, offering durable and corrosion-resistant fastening solutions.
Durable zinc plated hexagon set screws and nuts, available in various sizes, offering high strength and corrosion resistance for secure fastening solutions.
High-quality hexagon set screws and nuts, zinc plated for corrosion resistance, available in various sizes including M8 and M12, with durable Grade 8.8 strength.
High-quality hexagon set screws and nuts with zinc plating for durability and corrosion resistance, available in various sizes.