Hardware TIMco
Active Filters
TIMco
Suggestions for Hardware TIMco
Drill Chisel Hammer Jigsaw Mallet Pliers C-clamp Crowbar F-clamp Handsaw Hex key Pry bar Rip saw Scraper Back saw Hole saw Nail gun Nail set Bar clamp Drill bit Miter saw Screw gun Spade bit Chalk line Driver bit Nut driver Pipe clamp Try square Belt sander Brad nailer Claw hammer Cold chisel Laser level Masonry bit Putty knife Screwdriver Staples gun Stud finder Tile cutter Wood chisel
Sitching screw designd for light sectional steelwork - A coarse self tapping thread with a tapered shank - Plated with silver ruspert
Designed to anchor insulation material to concrete and masonry substrate materials - Large diameter head - 35mm - Model number: MID35
Proven reliable TIMco technology - Lightweight construction at just 0.09 Kgs - High performace for the home or tradesman
TIMco 16NPP M16 Nylon Lock Nut, zinc-plated, bright, Type P BZP for securing threads with a pack of 2. DIN 982 standard ensures compatibility and reliability in various applications.
TIMco 12NPP DIN 982 BZP Type P Nylon Nut M12 in Bright Zinc Plated finish, pack of 4. Secure and reliable lock nuts for various applications. High-quality and long-lasting material.
Hex nuts with zinc coating, used for bolting and fastening applications, available in M10 size.
TIMco's 1250WHSPZP BZP Square Plate Washer is a 12mm, 50mm square plate washer made of high-quality zinc plated steel. This pack of two provides durable and reliable support for your projects, ensuring fasteners are held firmly in place.
TIMco's zinc-plated square plate washers are designed with an M10 thread size, 50mm length, and a 50x50mm body. The pack contains two washers in high-quality steel for added durability.
M8 steel washers with zinc plating, 8mm inner and 17mm outer diameter, available in packs of 30.
Steel washer with zinc plating, 6mm outer diameter, 12.5mm inner diameter, pack of 60. Suitable for use with screws or bolts in various applications. Made from high-quality BZP material. DIN 125 Form A standard. Perfect for DIY projects and repairs.
Galvanized presser point staples, 40mm long and 4mm wide, for fencing and other applications.
Dome Head Carriage Bolt with Hex Nut - Square underhead to assist with grip when tightening - Zinc plated
Loose shield anchor with a yellow finish, suitable for various applications, featuring an M10 thread and 10mm length.
Quick and easy fixing - Strong collar to support drive nail - Tough durable nylon plug - Complete with 3.5 x 45 mm countersunk screw
Polymer headed nails with stainless steel, 30mm long, white in color, for various applications.
Paper collated nails with T Head to give concealed fixings and a diamond point head for maximum penetration - Straight collation angle - Electro galvanised plating, suitable for indoor applications
Dome Head Carriage Bolt with Hex Nut Square underhead to assist with grip when tightening Zinc plated
Double sided tooth plate Conforms to BS EN 912:2000Pre-gavanised mild steel
Forged Hook Zinc plated and passivated Plated with 3-5 micron thickness of zinc
Forged Hook Zinc plated and passivated Plated with 3-5 micron thickness of zinc
Forged Hook Zinc plated and passivated Plated with 3-5 micron thickness of zinc
Panel Pins Various sizes available Presented in the handy TIMpac Bright finish
Zinc‑plated masonry nails, 2.5 mm diameter and 50 mm length, feature a flat head for smooth penetration into concrete and brick. Their corrosion resistance makes them reliable for construction and repair tasks.
Timco Penny/Repair Washer - BZP - M6 X 40-4 Pieces is a pack of four zinc plated penny washers with an outer diameter of 6mm and a length of 40mm.
TIMCO penny/repair washers are silver-colored, DIN9054 standard with M10 x 40mm size. They come in a pack of four and are zinc plated for corrosion resistance. Suitable for repairing or holding objects together.
Designed to anchor insulation material to concrete and masonry substrate materials Large diameter head All metal through fix
TIMco (5055331854940 / 16HNUTZP)
TIMco Nylon Nut M10, DIN 982 BZP Type P with Bright Zinc Plating. Locking feature prevents loosening due to vibrations, suitable for heavy-duty applications. Pack of 4.
Durable and non-adhesive Polythene barrier ideal for marking floors, walls or hazardous area Internal and external use