Lemförder 36519 01 - Tie Rod End

Product Overview

The Lemförder 36519 01 Tie Rod End is a precision-engineered steering component designed for the front axle of various BMW models. It serves as the critical link between the steering rack and the wheel hub, translating driver input into accurate wheel movement. This part is engineered to meet or exceed OEM specifications, ensuring reliable handling and long-term durability.

Key Features

• High-Strength Construction: Made from hardened steel with a robust bushings assembly, the tie rod end resists fatigue and wear under high steering loads.
• Exact Fitment: Compatible with a wide range of BMW front-wheel-drive vehicles, including the 1 Series (F20), 3 Series Touring (F31) and Gran Coupe (F36), as well as the 5 Series (F80) and M3/M4 variants.
• Precision Machining: The component features tight tolerances on the ball joint and bushings, guaranteeing smooth operation and minimal play.
• Corrosion Resistance: Surface treatment protects against rust and environmental degradation, extending service life.
• Easy Installation: Designed for straightforward removal and replacement, reducing labor time during maintenance.

Technical Specifications

Installation Guide

The following steps outline a typical installation procedure for the Lemförder 36519 01 Tie Rod End. Always refer to the vehicle’s service manual for specific torque values and safety precautions.

1. Preparation: Raise the vehicle and secure it on jack stands. Remove the wheel to access the steering knuckle.
2. Remove Old Component: Loosen the tie rod end nut with a breaker bar. Carefully detach the ball joint from the steering knuckle, noting any retaining clips.
3. Inspect: Check the steering knuckle for damage or wear. Replace if necessary.
4. Install New Tie Rod End: Align the new tie rod end with the steering knuckle. Secure it using the retaining clip or locknut.
5. Tighten: Apply the manufacturer’s recommended torque to the tie rod end nut.
6. Reassemble: Reinstall the wheel and lower the vehicle.
7. Alignment: Perform a wheel alignment to ensure proper steering geometry.

Maintenance Tips

• Inspect the tie rod end for excessive play or noise during routine maintenance.
• Replace the component if you notice any signs of wear, such as cracked bushings or a loose ball joint.
• Keep the steering system clean to prevent debris from entering the joint.

Compatibility Summary

The Lemförder 36519 01 Tie Rod End is engineered for the following BMW models:

• 1 Series (F20)
• 3 Series Touring (F31)
• Gran Coupe (F36)
• 5 Series (F80)
• M3/M4 (various chassis codes)

Why Choose Lemförder?

Lemförder is renowned for its commitment to quality and performance. Their parts are manufactured under strict quality control, ensuring that each component delivers the reliability expected by BMW owners. The 36519 01 Tie Rod End exemplifies this dedication, offering:

• Consistent Fitment across multiple vehicle generations.
• Durability that withstands the demands of daily driving and spirited performance.
• Precision Engineering that maintains steering accuracy over time.

Conclusion

The Lemförder 36519 01 Tie Rod End is a high-quality, OEM-compatible steering component that delivers reliable performance and longevity for BMW front-wheel-drive vehicles. Its robust construction, precise machining, and proven fitment make it an excellent choice for anyone seeking to maintain or restore their vehicle’s steering integrity.