Skip to content
Comparor Shopping ExperienceMake informed choices

Metzger 893057 Lambda Sensor

Sponsored This site contains affiliate links for which we may receive compensation. More information

Metzger 893057 Lambda Sensor

The Metzger 893057 Lambda Sensor is a high‑performance oxygen sensor designed to monitor the exhaust gas composition of internal combustion engines. By measuring the ratio of oxygen to nitrogen in the exhaust, it provides critical data that allows the engine control unit (ECU) to adjust fuel injection and ignition timing for optimal combustion efficiency, reduced emissions, and improved power delivery.

Key Functional Characteristics

  • Operating Principle: The sensor employs a zirconia electrolyte that generates a voltage proportional to the oxygen concentration difference between the exhaust gas and ambient air. This voltage is fed back to the ECU as an analog signal.
  • Signal Output: Typical output ranges from 0 mV (lean mixture) to 1,200 mV (rich mixture), with a linear response curve for precise fuel‑air ratio control.
  • Response Time: Less than 100 ms for rapid detection of changes in exhaust composition, enabling real‑time engine tuning.
  • Temperature Range: Operates effectively between –40 °C and +400 °C, ensuring reliability across a wide spectrum of operating conditions.
  • Durability: Constructed with high‑grade ceramic and stainless steel housing to resist corrosion, vibration, and thermal cycling.

Design & Construction Details

The sensor features a compact cylindrical body measuring approximately 30 mm in length and 12 mm in diameter. Its design incorporates:

  • A rubber gasket that seals the sensor against exhaust gases, preventing leaks while maintaining flexibility for thermal expansion.
  • An integrated electrical connector with a secure locking mechanism to prevent accidental disconnection during operation.
  • A protective metallic shield around the ceramic core that deflects heat and protects against mechanical impact.

Compatibility Overview

The Metzger 893057 Lambda Sensor is engineered to fit a broad range of vehicles, particularly those manufactured by Citroën and Peugeot. It is suitable for models such as:

  • Citroën: Berlingo, C3 Pluriel, C3, Xsara, Xsara Picasso, Saxo, C5.
  • Peugeot: 106, Partner, Ranch, 307, 206, 306, 1007.

Its standardized mounting flange and connector type allow for straightforward installation in the pre‑catalyst exhaust manifold area. The sensor’s dimensions are compatible with OEM specifications for these models, ensuring a seamless fit without the need for adapters or modifications.

Installation Procedure

  1. Preparation: Warm up the engine to operating temperature and disconnect the battery to prevent electrical shock. Remove any existing lambda sensor by loosening the mounting bolts with a suitable socket set.
  2. Cleaning: Clean the exhaust manifold surface with a non‑abrasive cleaner to remove soot or corrosion that could impede proper sealing.
  3. Mounting: Position the new Metzger sensor onto the manifold, aligning the mounting flange. Tighten bolts in a cross‑pattern sequence to ensure even pressure distribution.
  4. Connection: Attach the electrical connector, ensuring the locking tab engages securely. Verify that the cable routing does not interfere with moving parts or heat sources.
  5. Testing: Reconnect the battery and start the engine. Use an OBD‑II scanner to confirm sensor voltage readings fall within expected ranges (0–1,200 mV). Adjust ECU calibration if necessary for optimal performance.

Performance Benefits

  • Enhanced Fuel Efficiency: Precise oxygen measurement allows the ECU to maintain an ideal air‑fuel ratio, reducing fuel consumption by up to 5% in many driving conditions.
  • Lower Emissions: Accurate sensor data helps keep exhaust emissions within regulatory limits, contributing to cleaner air and compliance with Euro standards.
  • Improved Engine Longevity: By preventing rich or lean running conditions, the sensor protects catalytic converters and engine components from excessive wear.
  • Robust Reliability: The durable construction ensures consistent operation over thousands of hours, even in harsh environments.

Maintenance & Troubleshooting

Routine inspection is recommended to ensure the sensor remains free from soot buildup and that the electrical connector stays intact. Common issues and solutions include:

  • No Voltage Output: Check for a broken wiring harness or disconnected connector; inspect for corrosion on pins.
  • Erratic Voltage Readings: Verify proper mounting pressure; ensure the sensor is not exposed to excessive heat from nearby components.
  • Sensor Failure After Extended Use: Replace with a new unit, as ceramic degradation can occur after prolonged exposure to high temperatures.

Technical Specifications Summary

ParameterValue
Model Number893057
Sensor TypeZirconia Oxygen Sensor
Output Voltage Range0 mV – 1,200 mV
Response Time<100 ms
Operating Temperature–40 °C to +400 °C
Mounting FlangeStandard OEM
Connector Type3‑pin electrical plug
Compatible VehiclesCitroën & Peugeot models listed above
MaterialZirconia core, stainless steel housing, rubber gasket

Conclusion

The Metzger 893057 Lambda Sensor delivers reliable, high‑precision oxygen measurement essential for modern engine management systems. Its robust construction, rapid response, and broad vehicle compatibility make it a trusted component for maintaining optimal combustion performance, fuel economy, and emission control across a wide range of Citroën and Peugeot engines.

This product in Comparor

CategoryThis product is cataloged in our store in these categories
InternationalFind this product in one of our international stores
ColorsPredominant colors of the product

Identifiers

Brand
Metzger Metzger is a German brand that produces high-quality meat products. The company is known for its sausages, ham, and bacon, and its products are sold in grocery stores and supermarkets around the world. Metzger's products are made with fresh, natural ingredients and are free of additives and preservatives.
MPN
Metzger 893057
ID
26244100
Comparor · Email address

Comparor Daily

Verified deals and the latest news, every day.

🤖 Hello! I can help you choose what you need, answer product questions and find offers. What are you looking for?
AI shopping assistant using Comparor’s catalogue. AI may make mistakes; check the offer details before buying.
Comparor AI BETA 2.0
Online
Restart the conversation?