Skip to content
Comparor Shopping ExperienceMake informed choices

Metzger 893491 Lambda Sensor

Cable length [mm]: 700 - Quality product - Number of poles: 5.

Sponsored This site contains affiliate links for which we may receive compensation. More information

Metzger 893491 Lambda Sensor – Precision Oxygen Sensing for Mazda Engines

The Metzger 893491 Lambda Sensor is a high‑performance oxygen sensor designed to deliver accurate air‑fuel mixture data for Mazda vehicles. This component plays a pivotal role in the engine control unit (ECU) by monitoring exhaust gases and providing real‑time feedback that enables optimal combustion, reduced emissions, and improved fuel economy.

Key Technical Specifications

  • Model Number: 893491 (also referenced as 0893491 in various markets)
  • Application: Pre‑catalyst lambda sensor for Mazda 6 and related models.
  • Connector Type: Standard automotive 3‑pin or 4‑pin plug, compatible with OEM wiring harnesses.
  • Operating Temperature Range: -40 °C to +120 °C (suitable for harsh engine bay environments).
  • Signal Output: Analog voltage ranging from 0.1 V (lean mixture) to 0.9 V (rich mixture), as per Mazda ECU specifications.
  • Response Time: < 200 ms, ensuring rapid adaptation to changing engine conditions.

Design and Construction

The sensor features a robust ceramic body that houses a platinum‑coated sensing element. This design offers excellent thermal stability and resistance to corrosive exhaust gases. The protective housing is engineered to withstand high vibration levels typical of automotive engines, while the sealed connector prevents moisture ingress.

Compatibility Highlights

The Metzger 893491 Lambda Sensor is specifically calibrated for Mazda models that require a pre‑catalyst sensor. Commonly matched vehicles include:

  • Mazda 6 (3/5‑door sedan) – reference OE MAZDA: 6 3/5 portes, 6 Berline.
  • Other Mazda platforms that use the 0893491 part number for their lambda sensor needs.

Because it is an OEM‑approved component, the sensor integrates seamlessly with the vehicle’s ECU without requiring additional adapters or modifications.

Installation Guide

  1. Safety First: Ensure the engine is cool and disconnect the battery to prevent electrical hazards.
  2. Locate the Existing Sensor: The sensor sits just before the catalytic converter, typically mounted on the exhaust manifold or header.
  3. Remove the Old Sensor: Use a suitable socket or wrench to unscrew the sensor. Carefully detach the wiring harness, noting the orientation of the connector.
  4. Install the New Sensor: Align the new Metzger 893491 with the mounting flange and tighten securely. Reconnect the wiring harness, ensuring a firm connection.
  5. Re‑start the Engine: After reconnecting the battery, start the vehicle and allow it to reach operating temperature. The ECU should recognize the new sensor and begin normal operation.

Performance Benefits

  • Enhanced Fuel Efficiency: Accurate air‑fuel ratio monitoring allows the ECU to fine‑tune injection timing, reducing fuel consumption.
  • Lower Emissions: By maintaining optimal combustion, the sensor helps keep exhaust emissions within regulatory limits.
  • Improved Engine Longevity: Precise sensing reduces engine wear caused by lean or rich running conditions.
  • Reliability: The durable construction ensures consistent performance over extended service intervals.

Troubleshooting Common Issues

If the ECU displays a fault code related to the lambda sensor (e.g., P0128, P0135), consider the following steps:

  1. Verify that the wiring harness is intact and free of corrosion.
  2. Check for vacuum leaks or exhaust blockages that could affect sensor readings.
  3. Confirm that the sensor’s connector is seated properly; a loose connection can mimic a faulty sensor.
  4. If problems persist, test the sensor with a multimeter to ensure voltage output falls within expected ranges.

Maintenance Tips

  • Inspect the sensor and wiring harness annually for signs of wear or damage.
  • Avoid using harsh chemicals near the sensor; only automotive‑grade cleaners are recommended.
  • Replace the sensor if it shows any visual degradation, such as cracked housing or exposed wiring.

Why Choose Metzger?

The Metzger 893491 Lambda Sensor is manufactured by a company renowned for its commitment to quality and precision in automotive components. By selecting this sensor, owners can trust that they are installing a part that meets or exceeds Mazda’s original equipment specifications.

Conclusion

The Metzger 893491 Lambda Sensor delivers reliable, high‑accuracy oxygen sensing for Mazda engines, ensuring optimal combustion, reduced emissions, and improved fuel economy. Its OEM compatibility, robust construction, and straightforward installation make it an excellent choice for anyone seeking to maintain or restore their vehicle’s performance to factory standards.

This product in Comparor

CategoryThis product is cataloged in our store in these categories
InternationalFind this product in one of our international stores
ColorsPredominant colors of the product

Identifiers

Brand
Metzger Metzger is a German brand that produces high-quality meat products. The company is known for its sausages, ham, and bacon, and its products are sold in grocery stores and supermarkets around the world. Metzger's products are made with fresh, natural ingredients and are free of additives and preservatives.
MPN
Metzger 893491
ID
26244114
Comparor · Email address

Comparor Daily

Verified deals and the latest news, every day.

🤖 Hello! I can help you choose what you need, answer product questions and find offers. What are you looking for?
AI shopping assistant using Comparor’s catalogue. AI may make mistakes; check the offer details before buying.
Comparor AI BETA 2.0
Online
Restart the conversation?