Skip to content
Comparor Shopping ExperienceMake informed choices

NPS DOX-0261 Lambda Probe Denso

The Denso DOX-0261 is a high-quality Lambda probe that accurately measures the air-to-fuel mixture in exhaust gases, ensuring optimal engine performance and reduced emissions

Sponsored This site contains affiliate links for which we may receive compensation. More information

NPS DOX-0261 Lambda Probe Denso

The DOX-0261 Lambda Probe from Denso is a high‑performance oxygen sensor designed to monitor exhaust gases in internal combustion engines. It delivers precise measurements of the air‑fuel mixture, enabling optimal engine control and reduced emissions.

Key Functional Characteristics

  • Single‑wire design: The probe uses a single electrical connection for simplicity and reliability in automotive wiring harnesses.
  • 4‑wire configuration: In addition to the signal wire, it incorporates power, ground, and reference wires, ensuring stable operation across varying engine conditions.
  • 510 mm length: The extended cable allows flexible installation in vehicles with limited space between the exhaust manifold and the sensor mounting point.
  • Grey plug connector: Standardized for easy integration into OEM and aftermarket systems, matching common automotive oxygen sensor sockets.
  • High‑temperature tolerance: Engineered to withstand temperatures up to 600 °C, maintaining accuracy even under extreme operating conditions.

Performance Benefits

The DOX-0261 delivers rapid response times and accurate readings of oxygen concentration in exhaust gases. This precision allows the engine control unit (ECU) to adjust fuel injection and ignition timing, resulting in:

  • Improved fuel economy by maintaining optimal stoichiometry.
  • Lower tailpipe emissions through precise air‑fuel ratio management.
  • Enhanced engine longevity due to reduced combustion stress.

Compatibility Overview

The probe is engineered for a wide range of Toyota and Lexus models, including:

  • RAV4 (II & III), Previa/Estima II, Camry, Avalon, Avensis, Verso, and RX series.
  • Lexus ES, RX350, and other V4‑engine vehicles from 2006 to 2012.
  • Various engine configurations such as 2.0 L, 2.4 L, 3.5 L, and 4.0 L powertrains.

Its direct‑fit design means the sensor can replace the original equipment (OE) part without modification, ensuring seamless integration with existing vehicle systems.

Installation Guidance

  1. Locate the exhaust manifold: Identify the correct mounting point for the oxygen sensor on the engine’s exhaust system.
  2. Remove the old sensor: Use a suitable socket or wrench to unscrew the existing probe, taking care not to damage the exhaust pipe.
  3. Install the DOX-0261: Align the grey plug connector with the mounting flange and tighten securely. Ensure the cable is routed without sharp bends.
  4. Reconnect wiring: Attach the sensor’s four wires to the corresponding harness terminals, verifying polarity and continuity.
  5. Check for leaks: After installation, inspect the exhaust system for any signs of gas leakage around the sensor area.

Maintenance Tips

  • Regularly inspect the sensor cable for wear or corrosion, especially in high‑humidity environments.
  • Verify ECU diagnostics periodically; a malfunctioning lambda probe often triggers check engine lights.
  • Avoid using abrasive cleaners on the sensor housing to preserve its integrity.

Technical Specifications Summary

ParameterValue
Model NumberDOX-0261
TypeSingle‑wire, 4‑wire lambda probe
Cable Length510 mm
Connector ColorGrey plug
Operating TemperatureUp to 600 °C
CompatibilityToyota & Lexus models (RAV4, Camry, Avalon, etc.)
Installation TypeDirect fit OE replacement

Conclusion

The NPS DOX-0261 Lambda Probe Denso is a reliable, high‑quality component that ensures accurate monitoring of exhaust gases across a broad spectrum of Toyota and Lexus vehicles. Its robust construction, direct‑fit compatibility, and precise performance make it an essential part for maintaining engine efficiency, reducing emissions, and supporting long‑term vehicle reliability.

This product in Comparor

CategoryThis product is cataloged in our store in these categories
InternationalFind this product in one of our international stores
ColorsPredominant colors of the product

Identifiers

Brand
Denso Denso is a Japanese automotive parts manufacturer. It is the world's largest supplier of automotive ignition systems, and also produces a wide range of other automotive components.
Model
Denso DOX-0261
MPN
Denso DOX-0261
ID
7099789
NPS DOX-0104 Lambda Probe Denso

NPS DOX-0104 Lambda Probe Denso

Introducing the Denso DOX-0104 Lambda Probe, an essential part for your car's exhaust system. This high-quality oxygen sensor ensures optimal engine performance and reduces emissions. Don't compromise on quality - get yours today!

NPS DOX-0106 Lambda Probe Denso

NPS DOX-0106 Lambda Probe Denso

The Denso DOX-0106 Lambda Probe is a high-quality exhaust probe designed to accurately measure the air-fuel mixture in your vehicle's engine, ensuring optimal performance and fuel efficiency.

Comparor · Email address

Comparor Daily

Verified deals and the latest news, every day.

🤖 Hello! I can help you choose what you need, answer product questions and find offers. What are you looking for?
AI shopping assistant using Comparor’s catalogue. AI may make mistakes; check the offer details before buying.
Comparor AI BETA 2.0
Online
Restart the conversation?