123.00 EUR
APC BV1000I-GR Line-Interactive 600Watt 1000VA Easy UPS
Ensure continuous operation with the APC BV1000I-GR, a reliable line-interactive UPS providing up to 1000 VA/600 Watts.
Stores where to buy this product
APC BV1000I-GR Line‑Interactive UPS Overview
The APC BV1000I-GR is a compact, line‑interactive uninterruptible power supply (UPS) designed to protect critical equipment such as computers, servers, networking gear and small office appliances. With a nominal output of 230 V AC, it delivers up to 600 W of real power while maintaining a capacity of 1000 VA. Its design incorporates advanced Automatic Voltage Regulation (AVR) that stabilises input voltage fluctuations, ensuring reliable operation even during brown‑outs or surges.
Key Technical Specifications
- Output Power: 600 W / 1000 VA
- Battery: 12 V, 9 Ah sealed lead‑acid (VRLA)
- Battery Recharge Time: 8 h
- Input Frequency: 50/60 Hz
- Output Frequency: 50/60 Hz, sinusoidal waveform
- Number of AC Outlets: 4 Type F (Schuko) sockets
- Noise Level: 40 dB
- Operating Temperature: 0–40 °C
- Relative Humidity: 0–90 %
- Altitude Range: 0–1968.3 m
- Dimensions (W×H×D): 160 mm × 92 mm × 305 mm
- Weight: 5.7 kg
- Certification: CE, REACH, RoHS compliant
- Transfer Time (Line to Battery): 6 ms
- Cable Length: 1.52 m
Design Features and Build Quality
The unit’s compact form factor, measuring just 160 mm in width and 92 mm in height, allows it to fit comfortably on a desk or under a monitor. The chassis is constructed from durable plastic with reinforced corners, providing protection against accidental bumps while keeping the overall weight light at 5.7 kg. A built‑in LED indicator panel offers real‑time status updates: power mode, battery level, and fault alerts.
Protection Capabilities
The APC BV1000I-GR incorporates a multi‑layer protection strategy:
- Automatic Voltage Regulation (AVR): Corrects minor voltage dips or spikes without switching to battery, extending battery life.
- Surge Protection: Limits transient over‑voltage events to a maximum of 156 J, safeguarding connected devices.
- Overload and Short‑Circuit Protection: Detects excessive load or fault conditions, triggering an audible alarm and shutting down the unit if necessary.
- Battery Monitoring: Alerts users when battery charge falls below safe thresholds, ensuring timely maintenance.
Operational Modes
The UPS operates in two primary modes:
- Line Mode (Normal Operation): The unit supplies power directly from the mains while continuously monitoring voltage and frequency. AVR engages automatically to maintain stable output.
- Battery Mode (Power Outage or Severe Voltage Drop): When input voltage falls outside acceptable limits, the UPS switches to battery within 6 ms, providing uninterrupted power until mains restoration or battery depletion.
Connectivity and Expansion
The four Type F (Schuko) outlets support standard European plugs, enabling connection of multiple devices such as PCs, monitors, routers, and printers. The 1.52 m power cable offers flexibility in placement relative to the mains supply.
Environmental Considerations
The APC BV1000I-GR is designed for a wide range of operating conditions:
- Temperature: 0–40 °C ensures reliable performance in typical office environments.
- Humidity: 0–90 % accommodates both dry and humid climates.
- Altitude: Up to 1968.3 m allows deployment in high‑elevation locations without compromising battery or AVR function.
Maintenance and Longevity
The sealed lead‑acid battery eliminates the need for regular water top‑ups, reducing maintenance overhead. With an 8‑hour recharge cycle, the battery can be fully replenished overnight, ensuring readiness for the next day’s power demands. The unit’s robust construction and compliance with RoHS, CE, and REACH standards guarantee long‑term reliability while adhering to environmental regulations.
Typical Use Cases
- Home Office: Protects a desktop computer, monitor, and networking equipment from sudden outages.
- Small Business: Safeguards critical servers, VoIP phones, and security cameras.
- Educational Settings: Provides backup power for lab computers and multimedia systems during campus power fluctuations.
Conclusion
The APC BV1000I-GR Line‑Interactive UPS delivers a balanced combination of capacity, protection, and compactness. Its 600 W output coupled with AVR technology makes it an ideal choice for environments where power stability is essential but space constraints exist. With comprehensive safety features, environmental resilience, and straightforward connectivity, this UPS stands out as a reliable guardian for everyday electronic equipment.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Tags | ONDULEUR APC BV1000I-GR |
| Identifiers | |
| Brand | ![]() APC is a brand that specializes in making high-quality, durable, and functional clothing and accessories for men and women. The brand is known for its simple and timeless designs, as well as its focus on quality and functionality. APC is a favorite among fashion-savvy individuals for its unique and stylish pieces. |
| MPN | APC BV1000I-GR |
| ID | 17714826 |
| Dimensions / Weight | |
| Key Features | |
|
AC outlet types A list of the different AC power outlet or coupler types that a product supports, such as C13, C19, C20, Type F, Type G (BS 1363), NEMA 5‑15R, etc. Each entry represents a distinct electrical connector that can be used to supply power to the device.
|
Type F |
|
Battery capacity The total amount of electrical energy a battery can store, expressed as a numeric value with an appropriate unit such as mAh or Ah. It indicates how long the device can operate between charges and allows users to compare power supplies across products.
|
9 Ah |
| Battery recharge time | 8 h |
|
Battery technology The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.
|
Sealed Lead Acid (VRLA) |
|
Battery voltage The electrical potential difference supplied to a battery or measured across its terminals, expressed in volts (V). It indicates the nominal operating voltage of the battery and is used to match power sources, chargers, and devices that require a specific voltage level.
|
12 V |
|
Cable length The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.
|
1.52 m |
|
Certification A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.
|
CE REACH |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
305 mm |
|
Form Factor Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.
|
Compact |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
92 mm |
|
Input frequency The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.
|
50/60 Hz |
|
LED indicators A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.
|
Yes |
|
Noise level The sound intensity produced by a product, expressed in decibels (dB) or sones. It indicates how loud the device is during operation and helps users assess suitability for quiet environments.
|
40 dB |
|
Nominal output voltage The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It represents the typical operating voltage for the product and helps users verify compatibility with local mains or battery supplies.
|
230 V |
|
Operating altitude The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.
|
0 - 1968.3 m |
|
Output Power The electrical power that a device can deliver or consume, expressed in watts (W). It represents the actual power output under normal operating conditions and is useful for comparing performance across similar devices.
|
600 W |
|
Output power capacity The maximum electrical power that a device can deliver or consume, expressed in volt‑amps (VA). It represents the apparent power rating of the product and is used to compare capacity across similar equipment.
|
1000 VA |
|
Package depth The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.
|
143 mm |
|
Package Height The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.
|
237 mm |
|
Package width The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.
|
373 mm |
|
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.
|
Yes |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
5.7 kg |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
160 mm |



