SENSORHALTERUNG
Trodo EU
SENSORHALTERUNG – The Ultimate Parking Sensor Mounting Solution
The SENSORHALTERUNG is a high‑performance, adhesive mounting bracket designed specifically for the VEMO parking sensor model V99-72-0002. Whether you are installing it on an Audi, BMW, Volkswagen, Skoda, Seat, or Peugeot, this holder delivers reliable support and precise alignment for optimal sensor performance.
Key Features & Benefits
- Adhesive Mounting: The bracket uses a premium industrial adhesive that ensures a strong bond to the vehicle’s rear bumper or trunk panel. No drilling, no screws – just clean installation.
- Universal Compatibility: Designed for the VEMO V99-72-0002 sensor, it fits a wide range of models including Audi A2/A3/A4/B5/B6, BMW 3/5/X3/X5/X6, Volkswagen Polo/Sharan/Passat/T5, Skoda Octavia, Seat Leon, and many others.
- Precision Alignment: The holder’s geometry keeps the sensor at the exact angle required for accurate distance measurement, reducing false alarms and improving safety during reverse maneuvers.
- Durable Construction: Made from high‑grade ABS plastic with a protective coating that resists corrosion, UV exposure, and temperature extremes.
- Easy Installation & Removal: The adhesive backing allows for quick application. When it’s time to replace the sensor or remove the bracket, the adhesive can be peeled off without damaging the vehicle surface.
Installation Guide
- Preparation: Clean the mounting area with isopropyl alcohol and a lint‑free cloth. Ensure the surface is free of dust, oil, or wax.
- Positioning: Place the sensor bracket on the desired spot, aligning it with the vehicle’s rear bumper contour. Hold for a few seconds to confirm proper placement.
- Adhesive Activation: Peel back the protective film from the adhesive side of the bracket. Press firmly onto the cleaned surface, applying even pressure for at least 30 seconds.
- Sensor Attachment: Slide the VEMO sensor into the holder’s slot. The sensor will lock in place thanks to a snug fit and small retention tabs.
- Final Check: Verify that the sensor is level and firmly seated. Test the parking assist system by reversing slowly to ensure correct distance readings.
Technical Specifications
| Parameter | Description |
|---|---|
| Model | VEMO V99-72-0002 Sensor Holder |
| Mounting Type | Adhesive (Self‑adhesive) |
| Material | ABS Plastic with UV‑resistant coating |
| Compatible Sensors | VEMO V99-72-0002 Parking Sensor |
| Vehicle Compatibility | Audi, BMW, Volkswagen, Skoda, Seat, Peugeot (list of models provided) |
| Dimensions | Approx. 120 mm × 60 mm × 20 mm (varies slightly by model) |
| Weight | ~0.15 kg |
| Operating Temperature | -40 °C to +80 °C |
| Installation Time | 5–10 minutes |
Why Choose the SENSORHALTERUNG?
The SENSORHALTERUNG is engineered for drivers who demand precision, durability, and hassle‑free installation. Its adhesive design eliminates the need for mechanical fasteners that can loosen over time or damage paintwork. The holder’s exacting geometry ensures that the sensor remains perfectly aligned, providing reliable distance readings even in challenging driving conditions.
Maintenance & Care
- Inspect the adhesive bond annually; if you notice any lifting, clean the area and reapply a fresh adhesive strip.
- Avoid harsh chemicals that could degrade the ABS material. Mild soap and water are sufficient for routine cleaning.
- When replacing the sensor, remove the old bracket by gently peeling it from the surface. Clean the area before applying a new holder.
Frequently Asked Questions
- Can I use this holder on vehicles other than those listed?
- The holder is specifically calibrated for the VEMO V99-72-0002 sensor. While it may physically fit other models, optimal performance is guaranteed only on the supported vehicle lineup.
- Is the adhesive strong enough for high‑speed driving?
- Yes. The industrial adhesive is rated to withstand vibrations and temperature fluctuations typical of automotive environments.
- What if I need to remove the holder later?
- The adhesive can be peeled off cleanly without leaving residue or damaging paint, allowing for easy removal or replacement.
Conclusion
The SENSORHALTERUNG delivers a seamless blend of precision mounting, durability, and ease of installation. Whether you’re upgrading an existing parking sensor or installing one for the first time, this adhesive holder ensures that your vehicle’s reverse assistance system operates at its best. Trust in the quality of VEMO and the engineering excellence of the SENSORHALTERUNG to keep your driving experience safe and reliable.
This product in Comparor
Identifiers
Vemo is a brand that specializes in making watches. They make a wide variety of watches, from sporty to dressy, and everything in between. Their watches are known for their high quality and stylish designs.