Terminals & Kits
Suggestions for Terminals & Kits
Lever nut Lug terminal Terminal kit Barrier strip Ring terminal Wire terminal Cable terminal Crimp terminal Earth terminal Screw terminal Spade terminal Terminal block Terminal strip Faston terminal Ground terminal Solder terminal Splice terminal Barrier terminal Push-in terminal Euroblock terminal Insulated terminal PCB terminal block Push-in wire terminal Spring clamp terminal Non-insulated terminal DIN rail terminal block Terminal block accessory Quick disconnect terminal Multi level terminal block Four-position terminal block Three-position terminal block
A robust cross‑connector for two‑pole terminal blocks, featuring a compact WQV 6/2 design that ensures secure, low‑resistance connections in industrial wiring systems.
Blue WDU 6 BL feed‑through terminal block, 8 mm screw connection, 41 A/800 V rating, single row with two clamps, side mounting, UL 94 V0 rated insulation, ideal for DIN rail assemblies.
Blue feed-through terminal block with a 5.2 mm width, 48 mm height, and 47.7 mm depth, rated for 24 A up to 105 °C and down to –60 °C, ideal for compact wiring harnesses needing reliable screw‑clamp connections.
WAGO 770-103 - WINSTA® MIDI, 3-pin female connector with strain relief housing and plug-in installation capability, compatible with 3x4mm² wiring.
A compact DIN rail terminal block with a 5.2 mm width and 48 mm height, designed for 24‑ampere connections. It supports conductors from 0.14 to 4 mm², operates between –60 °C and 105 °C, and tolerates up to 1000 V.
A compact 5‑pin bridge for UT2.5/ST2.5/QTC1.5 terminals, rated up to 24 A and 800 V. It offers a reliable, insulated cross‑connection with a 5.2 mm pitch, ensuring secure, low‑loss signal transfer in industrial circuits.
Securely bridge up to five terminals with WAGO 780‑455, a two‑pole insulated cross‑connector designed for terminal blocks. Its compact box‑bridge layout offers reliable isolation and easy installation, ideal for industrial control panels and simplified cable management.
The FBS 2‑6 cross‑connector provides a tight 6.20 mm link between two pins on a DIN rail terminal block, with a sturdy metal body that ensures reliable, low‑loss signal transmission in control circuits.
A robust feed‑through terminal block with a 5.2 mm contact path and 24 A rating, featuring a spring‑loaded clamp for secure wire retention and easy installation on DIN rails or panels.
Dual‑shelf feed‑through terminal block for 2.5 mm² conductors, rated 24 A, featuring Klippon® Connect screw terminals in beige. Compact 5 mm pitch, ideal for tight panel mounting and reliable signal routing.
A robust grey feed‑through terminal block rated for 125 A, accommodating up to 16 mm² conductors with a secure two‑conductor design and integrated protective cover, ideal for high‑current industrial wiring.
WAGO 280-901 - 2-conductor feed-through terminal block, grey, with pull spring configuration and rated for up to 24A. Suitable for electrical installation kits with a 5mm spacing, available in packs of 100 pieces.
Orange end/partition plate for WAGO terminal blocks, 2.5 mm thick, designed to secure and separate conductors in a 2‑conductor feed‑through setup, providing a clean, insulated termination point.
Blue 8 mm WAGO 782‑604 feed‑through terminal block handles two conductors up to 6 mm² and delivers 41 A, featuring a spring‑loaded contact for secure, low‑resistance connections in tight assemblies.
A slim 12 mm neutral disconnect block featuring a spring‑loaded push‑in cage clamp that secures conductors up to 6 AWG, rated at 250 V and 105 °C, ideal for DIN TH35 rail mounting.
Secure your grounding with the WAGO 285‑137 terminal block, a robust green‑yellow clamp that accepts up to 16 mm² conductors. Its compact design and side labeling slots simplify installation while ensuring reliable protection in any electrical system.
Blue, spring‑loaded WAGO feed‑through terminal block rated 125 A for 16 mm² conductors, accommodating wire diameters from 6 to 35 mm. It features dual‑lead design with side labeling slots and a compact, secure clamp for reliable connections.
Yellow WAGO 280‑906 feed‑through terminal block delivers reliable 24A connections for two conductors up to 2.5 mm², featuring a spring clamp that secures wires within a compact 5 mm width for tight installations.
Securely connect up to two conductors with this 5 mm pitch, 24 A feed-through terminal block. It accepts wire diameters from 0.08 mm to 2.5 mm, making it ideal for compact circuit assemblies.
A grey, 7.5 mm wide feed‑through terminal block rated at 41 A that securely clamps three conductors from 0.5 to 6 mm², providing reliable contact and easy DIN rail installation in compact electrical setups.
Securely connect up to two conductors from 0.08 mm² to 2.5 mm² with this single‑pole WAGO terminal strip, featuring a reliable screw‑tight clamp for stable electrical contact and easy installation on DIN rails.
The WAGO 2002‑409 cross‑connector offers a compact 9‑way push‑in design, enabling rapid, secure connections on terminal blocks. Each set includes 25 light‑gray jumpers for versatile wiring and easy isolation.
This 5‑way push‑in cross‑connector fits WAGO terminal blocks, offering a robust gray housing and 25 pieces for fast, reliable wire connections in control panels or automation circuits.
A compact ground terminal block featuring a spring‑loaded feed‑through design that securely joins two conductors up to 2.5 mm², with green and yellow markings for clear identification in DIN rail setups.
Secure three‑tier feed‑through with 5.2 mm terminals rated at 24A, handling conductors from 0.25 to 2.5 mm. Spring‑loaded L/L/N design allows quick, reliable connections in tight spaces.
Compact blue WAGO 2004‑1404 feed‑through terminal block delivers 32 A capacity for four conductors (0.5–4 mm²). Its 6.2 mm push‑in design mounts on DIN rail, providing quick, strain‑relieved connections with a secure clamp and clear color coding.
Filters