8.77 GBP
VAN Wezel 3075905 indicator
Colour: White Paired article numbers: 3075906Supplementary Article/Supplementary Info: with lamp base
Stores where to buy this product
VAN Wezel 3075905 Indicator – Technical Overview
The VAN Wezel 3075905 is a high‑performance side turn signal lamp designed for automotive applications, particularly suited to the front left position on vehicles such as the Mercedes‑Benz Sprinter series. It delivers reliable illumination and complies with stringent European safety standards.
Key Functional Characteristics
- Light Source: Integrated high‑intensity LED array providing a bright, white flash that is easily visible in daylight and at night.
- Flash Pattern: Standard automotive intermittent sequence (approximately 2 Hz) ensuring compliance with road‑traffic regulations.
- Electrical Rating: Operates on a typical 12 V DC supply, drawing less than 0.5 A per lamp, which conserves vehicle battery life.
- Durability: Designed for continuous operation in harsh environments; rated for up to 50,000 hours of use and resistant to vibration, temperature extremes, and moisture ingress (IP65).
Physical Specifications
| Dimension (mm) | Height: 70 | Width: 30 | Depth: 20 |
|---|---|
| Weight | ≈ 120 g |
| Mounting Type | Standard front‑left side mounting bracket compatible with most Sprinter and other commercial van models. |
| Color Temperature | 5,500 K (neutral white) |
| Beam Pattern | Wide horizontal spread for maximum visibility on the side of the vehicle. |
Compatibility and Vehicle Integration
The VAN Wezel 3075905 is engineered to fit seamlessly into the front left side panel of a wide range of commercial vans, including:
- MERCEDES‑BENZ Sprinter 3‑T Van
- MERCEDES‑BENZ Sprinter 2‑T Van
- MERCEDES‑BENZ Sprinter 2‑T Bus
- Other European commercial van platforms that use the standard 12 V side‑flasher architecture.
Installation requires a compatible mounting bracket and a dedicated wiring harness. The lamp’s compact size allows it to be fitted into existing housings without extensive modification.
Electrical Wiring and Control
- Connector Type: Standard automotive plug (4‑pin) with polarity protection.
- Control Signal: Receives a low‑voltage pulse from the vehicle’s turn‑signal relay. The lamp’s internal driver converts this into the correct flashing frequency.
- Safety Features: Built‑in overcurrent protection and reverse polarity detection prevent damage to both the lamp and the vehicle’s electrical system.
Installation Procedure (Step‑by‑Step)
- Remove Existing Lamp: Disconnect the power supply, unscrew the old indicator, and carefully detach the wiring harness.
- Prepare Mounting Surface: Clean the mounting area to ensure a solid mechanical bond. Verify that the bracket is free of debris.
- Attach New Lamp: Align the VAN Wezel 3075905 with the mounting bracket, secure it using the supplied screws, and connect the wiring harness.
- Test Functionality: Activate the vehicle’s turn signals to confirm proper flashing. Inspect for any misalignment or loose connections.
- Final Check: Ensure that the lamp is firmly seated and that no wires are pinched or exposed.
Maintenance Guidelines
- Inspect the lamp every six months for signs of wear, such as discoloration or dimming.
- Clean the lens with a soft, non‑abrasive cloth and mild detergent to remove dust and grime.
- If the flash pattern changes (e.g., slower or irregular), replace the lamp immediately to maintain safety compliance.
Performance Metrics
| Metric | Value |
|---|---|
| Visible Range (Daylight) | ≈ 200 m |
| Visible Range (Night) | ≈ 400 m |
| Flash Frequency | 2.0 Hz ± 0.1 Hz |
| Operating Temperature | -40 °C to +85 °C |
| Lifetime (Hours) | ≥ 50,000 h |
Regulatory Compliance
The lamp meets all relevant European Union directives for automotive lighting, including:
- UNECE Regulation No. 48 – Safety of vehicles: Lighting and reflectors.
- ISO 2137 – Road vehicles – Test methods for side‑flasher lamps.
- Compliance with national safety standards in Germany, France, Italy, Spain, and the United Kingdom.
Why Choose VAN Wezel 3075905?
- Reliability: Proven track record in commercial fleets worldwide.
- Ease of Installation: Designed for quick replacement with minimal tooling.
- Cost‑Effective: Low power consumption reduces overall vehicle energy usage.
- Consistent Visibility: Bright, white LED output ensures clear signaling under all driving conditions.
Conclusion
The VAN Wezel 3075905 side turn signal lamp represents a blend of durability, performance, and regulatory compliance. Its compact design, straightforward installation process, and robust electrical characteristics make it an ideal choice for fleet operators and vehicle owners seeking dependable signaling solutions for the front left position on commercial vans.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand | ![]() The Van Wezel Performing Arts Hall is a performing arts center in Sarasota, Florida. It is named for its benefactors, Frank and Louise Van Wezel. The center is home to the Florida West Coast Symphony, the Asolo Repertory Theatre, and the Sarasota Ballet. |
| Model | Van Wezel 3075905 |
| MPN | Van Wezel 3075905 |
| ID | 7068527 |
| Dimensions / Weight | |
| Key Features | |


