VEMO V95-72-0054 Engine Blocks

VEMO V95-72-0054 Engine Oil Level Sensor

The VEMO V95-72-0054 is a precision-engineered engine oil level sensor designed for high-performance vehicles. It delivers reliable, real-time monitoring of the engine’s oil quantity, ensuring optimal lubrication and protecting critical components from wear or overheating.

Key Features

• High Accuracy: The sensor provides a precise measurement of oil level with minimal drift over time, thanks to its advanced electronic circuitry.
• Robust Construction: Built from corrosion-resistant materials, the sensor withstands harsh engine bay environments and extended service life.
• Easy Installation: Designed for quick fitment, it requires no special tools or modifications to the vehicle’s existing oil level system.
• Wide Compatibility: Suitable for a broad range of models including Volvo XC60, V70, C30, and Jaguar XF, among others.
• Three-Poles Design: The three-pin connector simplifies wiring and ensures secure electrical contact.
• Sealed Housing: Integrated gasket seals prevent oil leakage and protect the internal electronics from contaminants.

Technical Specifications

Installation Guide

1. Locate the Existing Sensor: Open the hood and identify the current oil level sensor on the engine block.
2. Disconnect Power: Ensure the vehicle’s battery is disconnected to avoid accidental short circuits.
3. Remove Old Sensor: Unscrew or unclip the old sensor, taking care not to damage surrounding components.
4. Prepare New Sensor: Apply a thin layer of anti‑seize compound if recommended by the manufacturer.
5. Install V95-72-0054: Insert the new sensor into the mounting hole, aligning the connector pins with the vehicle’s wiring harness.
6. Tighten Securely: Use a torque wrench to achieve the specified tightening torque (typically 10–15 Nm).
7. Reconnect Power: Reattach the battery and test the sensor by checking the dashboard indicator or using an OBD‑II scanner.

Compatibility Overview

The VEMO V95-72-0054 is engineered to fit a variety of vehicle models. Below is a concise compatibility list:

• Volvo XC60 (156)
• Volvo V70 (3 series)
• Volvo C30, C70
• Volvo S40, S60, S80, V40, V50, V60, V70
• Jaguar XF (X260)
• Other models with similar engine bay configurations and sensor mounting points.

Benefits of Using the V95-72-0054 Sensor

• Enhanced Engine Protection: Accurate oil level readings prevent low‑oil conditions that could lead to bearing failure or engine seizure.
• Reduced Maintenance Costs: Early detection of oil depletion allows timely refills, avoiding costly repairs.
• Improved Fuel Efficiency: Proper lubrication reduces friction, contributing to better fuel economy.
• Long-Term Reliability: Durable construction ensures consistent performance over many years of service.

Maintenance Tips

While the V95-72-0054 is designed for minimal upkeep, periodic checks can extend its lifespan:

• Inspect the connector pins for corrosion or debris every 12 months.
• Verify signal output with a multimeter to ensure it remains within expected voltage ranges.
• Replace the sensor if any irregularities are detected, such as erratic dashboard warnings or inconsistent readings.

Conclusion

The VEMO V95-72-0054 Engine Oil Level Sensor stands out as a reliable, high‑quality component for modern vehicles. Its precise measurement capabilities, robust design, and broad compatibility make it an essential upgrade or replacement for owners seeking optimal engine performance and longevity.