ABS 201326 Wheel Hubs

ABS 201326 Wheel Hub Overview

The ABS 201326 Wheel Hub is a precision-engineered component designed to replace the original front or rear wheel hubs on a range of Mazda vehicles, including the Premacy, 6, 323 F VI, and MPV II. This hub incorporates an integrated ABS sensor ring, ensuring seamless communication with the vehicle’s anti-lock braking system. The kit is available in both left‑rear and right‑rear configurations, allowing for full compatibility across all four wheels.

Key Features

• OEM Quality Construction: Manufactured to Mazda’s original specifications, guaranteeing fitment and durability.
• Integrated ABS Sensor Ring: Provides accurate wheel speed data for optimal braking performance.
• Full Bearing Kit Included: Comes with high‑grade bearings that match the hub’s design tolerances.
• Easy Installation: Designed for straightforward removal of the stock hub and attachment of the new unit without special tools.
• Wide Model Compatibility: Fits Mazda models from 2000 to present, including Premacy, 6, 323 F VI, and MPV II.

Technical Specifications

Installation Guide

1. Prepare the Vehicle: Secure the car on a lift or jack stands and disconnect the battery to ensure safety.
2. Remove the Stock Hub: Detach the wheel, then use a socket set to remove the hub bolts. Carefully extract the old hub assembly.
3. Attach the New Hub: Position the ABS 201326 Wheel Hub onto the axle, aligning the mounting flange with the wheel hub bore. Tighten the bolts to the manufacturer’s torque specifications.
4. Reinstall Bearings: If not pre‑installed, seat the new bearings into the hub and secure them with retaining clips or lock washers.
5. Reconnect ABS Sensor: Ensure the sensor ring is properly seated; reconnect any wiring harnesses if applicable.
6. Reassemble Wheel: Mount the wheel back onto the hub, torque the lug nuts to spec, and lower the vehicle.
7. Test Drive: Verify that the ABS light remains off and that braking performance is consistent.

Benefits of Choosing the ABS 201326 Wheel Hub

• Reliability: Matches Mazda’s original design, reducing the risk of fitment issues.
• Performance: The integrated ABS sensor ensures accurate wheel speed detection, enhancing safety during braking.
• Longevity: High‑quality bearings and corrosion protection extend service life under varied driving conditions.
• Cost Efficiency: Eliminates the need for aftermarket adapters or additional components.

Common Applications

The ABS 201326 Wheel Hub is frequently used in:

• Routine replacement of worn hubs on Mazda Premacy and 6 models.
• Aftermarket upgrades for improved braking reliability.
• Restoration projects aiming to preserve OEM authenticity.

Maintenance Tips

• Inspect the hub and bearings annually for signs of wear or damage.
• Keep the wheel assembly clean to prevent contamination of bearing surfaces.
• Use manufacturer‑approved lubricants when servicing bearings.
• Verify ABS sensor alignment after any suspension work to maintain braking integrity.

Conclusion

The ABS 201326 Wheel Hub delivers a dependable, factory‑grade solution for Mazda owners seeking to replace or upgrade their wheel hubs. With its integrated ABS sensor ring and comprehensive bearing kit, this component ensures that braking performance remains uncompromised while providing the durability expected from OEM parts.