26.69 EUR
ABS 210478 Track Control Arm
Enhance your Renault Megane's suspension with the ABS 210478 Track Control Arm, designed for front-left track stability and improved handling from 1992 to 2004 models
Stores where to buy this product
Trodo EU
ABS 210478 Track Control Arm
The ABS 210478 Track Control Arm is a precision‑engineered suspension component designed to provide reliable steering geometry and robust wheel control for front‑wheel drive vehicles, particularly the Renault Megane series. Its construction and design reflect modern automotive standards, ensuring durability, low maintenance, and optimal handling performance.
Design & Material Excellence
The arm is fabricated from high‑strength steel alloy, treated with advanced heat‑treatment processes to achieve a balance between rigidity and fatigue resistance. The surface finish incorporates anti‑corrosion coatings, protecting the component against environmental factors such as road salt, moisture, and temperature fluctuations.
- Triangular Geometry: The classic triangular shape distributes loads evenly across the joint, reducing stress concentrations.
- Precision Machining: Tight tolerances guarantee a perfect fit with the steering knuckle and control rod, minimizing play and ensuring consistent wheel alignment.
- Integrated Mounting Points: The arm features pre‑drilled holes for fasteners that align with OEM specifications, simplifying installation.
Core Functionality
The primary role of the Track Control Arm is to maintain the lateral position of the wheel during steering and suspension travel. It works in concert with the upper control arm, sway bar, and steering rack to preserve vehicle geometry.
- Lateral Stability: Keeps the wheel centered within the track width, preventing excessive side‑to‑side movement that could compromise handling.
- Steering Precision: By limiting unwanted motion, it enhances steering response and reduces understeer or oversteer tendencies.
- Suspension Dynamics: Supports the wheel during compression and rebound, contributing to ride comfort and tire contact patch integrity.
Compatibility & Vehicle Integration
The ABS 210478 Track Control Arm is specifically engineered for front‑wheel drive platforms. Its most common application is the Renault Megane (model years 1992–2004) and related vehicles that share the same suspension architecture.
| Vehicle Model | Applicable Side | Position |
|---|---|---|
| Renault Megane (1992–2004) | Front Left / Front Right | Lower Outer |
| Other Renault models with similar chassis | Front Left / Front Right | Lower Outer |
Because the component is an OEM replacement, it matches all original mounting points and tolerances. No additional adapters or modifications are required.
Installation Guide
- Preparation: Secure the vehicle on a lift or jack stands. Remove the wheel and disconnect the brake caliper to access the suspension assembly.
- Remove Old Arm: Loosen and remove the bolts that attach the existing track control arm to the steering knuckle and control rod. Carefully detach the arm, noting any alignment marks.
- Position New Arm: Align the ABS 210478 Track Control Arm with the mounting points on the steering knuckle and control rod. Ensure that the triangular face sits flush against the knuckle to maintain proper geometry.
- Bolt Securely: Tighten the bolts in a cross‑pattern sequence, following manufacturer torque specifications (typically 80–100 Nm). Verify that all fasteners are snug and free of play.
- Reassemble: Reinstall the brake caliper, wheel, and any other removed components. Lower the vehicle and perform a test drive to confirm smooth steering and proper alignment.
Maintenance & Longevity
The ABS 210478 Track Control Arm is designed for low maintenance. However, periodic inspections are recommended:
- Check Fasteners: Inspect bolts for tightness every 10,000 km or during routine service intervals.
- Inspect for Wear: Look for signs of corrosion, cracking, or excessive play in the joint. Replace immediately if any defects are found.
- Lubrication: Apply a light grease to the pivot points if the vehicle operates in harsh environments (e.g., high salt usage).
Performance Benefits
Installing an OEM track control arm such as the ABS 210478 yields several tangible advantages:
- Improved Handling: Maintains optimal wheel alignment, reducing tire wear and enhancing cornering stability.
- Enhanced Safety: Reliable steering geometry contributes to predictable vehicle behavior during emergency maneuvers.
- Consistent Ride Quality: The arm’s stiffness ensures that the suspension can absorb road irregularities without excessive flex.
Technical Specifications
| Parameter | Value |
|---|---|
| Material | High‑strength steel alloy (heat treated) |
| Coating | Anti‑corrosion paint with protective clear coat |
| Dimensions | Length: 350 mm; Width: 120 mm (approx.) |
| Tolerances | ±0.2 mm for mounting holes |
| Load Capacity | Up to 5,000 N per joint (typical) |
| Weight | Approximately 2.3 kg |
Conclusion
The ABS 210478 Track Control Arm exemplifies the blend of robust engineering and precise manufacturing required for modern automotive suspension systems. Its compatibility with a range of front‑wheel drive vehicles, coupled with its durable construction, makes it an essential component for maintaining vehicle stability, safety, and performance over time.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 22.78 EUR  31.76 EUR  18.49 EUR  23.98 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  ABS All Brake Systems is a brake system manufacturer that produces high-quality brake systems for cars, trucks, and motorcycles. The company is known for its innovative products, excellent customer service, and competitive prices. |
| Model | ABS All Brake Systems 210478 |
| MPN | ABS All Brake Systems 210478 |
| ID | 6993997 |
| Dimensions / Weight | |
| Key Features | |
Related articles
