ABS K16817 Park Brake Cable

ABS K16817 Park Brake Cable

The ABS K16817 Park Brake Cable is a precision‑engineered component designed to provide reliable and consistent engagement of the parking brake system in a wide range of Daewoo, Ssangyong, and related vehicle platforms. This cable is engineered to meet or exceed original equipment specifications, ensuring that the parking brake functions with the same level of safety and performance as when the vehicle was first manufactured.

Key Design Features

• High‑Strength Steel Core: The cable incorporates a hardened steel wire core that resists stretching and fatigue, maintaining consistent tension over the life of the vehicle.
• Corrosion‑Resistant Sheathing: An outer layer of durable polymer coating protects the core from moisture, road salts, and other corrosive elements commonly encountered in automotive environments.
• Optimized Diameter: The cable’s diameter is calibrated to match the original housing dimensions, ensuring a snug fit and preventing slippage or binding during operation.
• Pre‑Tensioned Construction: Each cable is pre‑tensioned during manufacturing to provide immediate, reliable engagement of the parking brake when first installed.
• Dual‑Cable Compatibility: The product is available in single and dual configurations, allowing for installation on vehicles that require either a single rear cable or a pair of cables for dual‑handbrake systems.

Vehicle Compatibility

The ABS K16817 Park Brake Cable is specifically engineered for the following vehicle families:

• Ssangyong Korando I & II SUVs – rear left handbrake cable application.
• Ssangyong Musso SUV – rear left handbrake cable application.
• Daewoo models that share the same chassis and braking architecture as the Ssangyong platforms.

Because of its precise dimensional match, the cable can be installed without modification to the existing brake housing or linkage. It is suitable for both disc and drum brake configurations where the parking brake is actuated via a cable system.

Installation Overview

The installation process for the ABS K16817 Park Brake Cable is straightforward and can be completed with standard automotive tools. Below is a step‑by‑step guide to ensure proper installation and optimal performance:

1. Preparation: Disconnect the vehicle’s battery to eliminate any risk of accidental brake engagement. Remove the existing cable or cable pair from the parking brake housing.
2. Inspection: Examine the cable housing, pulleys, and brake lever for wear or damage. Replace any components that do not meet manufacturer specifications.
3. Cable Routing: Position the new cable through the existing routing path, ensuring that it follows the same track as the original. Avoid sharp bends or kinks that could compromise cable integrity.
4. Securing the Cable: Attach the cable to the parking brake housing using the provided hardware or the original mounting brackets. Tighten all fasteners to the specified torque values.
5. Adjustment: Pull the cable to engage the parking brake fully, then release. Verify that the brake lever returns to its neutral position without excessive play.
6. Testing: Reconnect the battery and test the parking brake by engaging it while the vehicle is stationary. Confirm that the brakes hold securely and release smoothly when disengaged.

Maintenance Tips

• Inspect the cable periodically for signs of wear, fraying, or corrosion. Replace immediately if any damage is observed.
• Keep the cable routing clean and free of debris. Accumulated dirt can cause binding or uneven wear.
• Use a light oil or silicone spray on the cable’s sheathing if operating in extremely dry climates to prevent cracking.
• Never force the parking brake lever beyond its normal range of motion, as this can overstress the cable and lead to premature failure.

Performance Characteristics

The ABS K16817 Park Brake Cable delivers consistent performance across a wide temperature range, from sub‑zero winter conditions to hot summer climates. Its high tensile strength ensures that the parking brake remains engaged even under heavy load or when the vehicle is parked on an incline. The cable’s low elongation rate guarantees that the brake lever maintains a predictable feel, which is critical for driver confidence and safety.

Quality Assurance

Each cable undergoes rigorous testing procedures, including:

• Tensile Strength Test: Verifying that the cable can withstand forces exceeding the maximum expected load.
• Corrosion Resistance Test: Exposing the cable to salt spray and humidity cycles to ensure long‑term durability.
• Dimensional Accuracy Check: Measuring core diameter, sheath thickness, and overall length to guarantee a perfect fit.

These tests confirm that the ABS K16817 Park Brake Cable meets industry standards for safety and reliability.

Why Choose the ABS K16817 Park Brake Cable?

• Exact OEM Match: Designed to replicate the original equipment’s specifications, providing seamless integration.
• Durability: Built to withstand the rigors of daily driving and harsh environmental conditions.
• Ease of Installation: Requires no special tools or modifications, making it a convenient replacement option.
• Safety Assurance: Maintains the integrity of the parking brake system, which is essential for vehicle stability and emergency stopping.

Whether you are performing routine maintenance, replacing a worn cable, or restoring an older vehicle to its original performance levels, the ABS K16817 Park Brake Cable offers a reliable, high‑quality solution that upholds the safety standards expected of modern automotive braking systems.