ABS SL 2145 Brake Hose

Overview

The ABS SL 2145 Brake Hose is a high‑performance, flexible hydraulic line designed for modern automotive brake systems. Engineered with precision and durability in mind, this hose delivers reliable pressure transmission while maintaining resistance to heat, vibration, and chemical exposure.

Key Design Features

• Material Composition: Constructed from a multi‑layer composite that combines reinforced rubber, high‑grade silicone, and an inner steel braid. This structure ensures excellent flexibility without compromising strength.
• Pressure Rating: Rated for continuous operation up to 350 psi (24 bar), making it suitable for both passenger cars and light commercial vehicles.
• Temperature Tolerance: Operates effectively between –40 °C and +120 °C, protecting against extreme cold during winter driving and heat buildup from prolonged braking.
• Chemical Resistance: Resistant to brake fluid (DOT 3/4), antifreeze, oil, and other automotive chemicals, preventing degradation over time.
• Flexibility & Length Options: Available in multiple lengths (1.5 m, 2.0 m, 2.5 m) with a flexible profile that accommodates tight routing around suspension components.

Compatibility

The ABS SL 2145 Brake Hose is engineered to fit a wide range of vehicle models, including but not limited to:

• Audi – various sedan and coupe platforms.
• Volkswagen – Golf, Passat, Transporter series.
• Seat – Ibiza, Leon, Ateca models.
• Other VAG Group Vehicles – including commercial vans and buses.

Installation Guidelines

1. Preparation: Ensure the brake system is depressurized before handling. Clean all fittings to remove debris or old sealant.
2. Fitting: Use compatible compression fittings or quick‑connect couplings that match the hose’s outer diameter (typically 8 mm). Tighten securely but avoid overtightening to prevent damage.
3. Routing: Route the hose along the vehicle’s chassis, avoiding sharp bends and areas with high heat flux. Secure with clamps or straps where necessary.
4. Testing: After installation, perform a brake fluid pressure test to confirm leak‑free operation before driving.

Maintenance & Inspection

Regular inspection is essential for safety and performance:

• Check for visible cracks, bulges, or discoloration during routine maintenance checks.
• Inspect fittings for tightness; replace if corrosion or wear is observed.
• Replace the hose after a recommended service interval (typically every 60,000–80,000 km) or sooner if any signs of deterioration appear.

Performance Benefits

• Consistent Braking Response: The rigid yet flexible construction ensures minimal pressure drop, providing drivers with reliable stopping power.
• Longevity: High‑grade materials resist fatigue and chemical attack, extending the hose’s service life beyond standard offerings.
• Safety Assurance: By maintaining structural integrity under high pressure, the hose reduces the risk of brake failure or fluid leakage.

Technical Specifications Summary

Conclusion

The ABS SL 2145 Brake Hose exemplifies engineering excellence in automotive brake components. Its robust construction, broad compatibility, and proven performance make it a trusted choice for technicians and vehicle owners seeking dependable braking reliability.