74.72 EUR
LED 3rd Third Brake Stop Lamp Light Fits MERCEDES W230 R230 2001-2012
Stores where to buy this product
Trodo EU
LED 3rd Third Brake Stop Lamp Light for Mercedes W230 R230 (2001‑2012)
The LED 3rd Third Brake Stop Lamp Light is a precision-engineered accessory designed to enhance the safety and visual appeal of the MERCEDES‑BENZ SL-Class, specifically models from the W230/R230 generation produced between 2001 and 2012. This high-performance stop light replaces the original rear brake lamp, offering brighter illumination, faster response times, and a longer lifespan compared to conventional incandescent bulbs.
Key Features & Benefits
- High-Intensity LED Technology: Delivers up to 10× the brightness of standard halogen lamps, ensuring maximum visibility in all weather conditions.
- Rapid Activation: LED drivers respond within milliseconds, providing instant warning signals to trailing vehicles.
- Low Power Consumption: Consumes less than half the wattage of traditional bulbs, reducing load on the vehicle’s electrical system.
- Long Service Life: Rated for over 50,000 hours, significantly extending maintenance intervals.
- Authentic OEM Fitment: Designed to match the exact dimensions and mounting points of the original brake light assembly, guaranteeing a seamless installation experience.
- Compliance with Safety Standards: Meets all relevant automotive safety regulations for rear lighting systems.
Compatibility Overview
The lamp is engineered to fit the following Mercedes models without modification:
- MERCEDES‑BENZ SL-Class R230 (2001‑2012)
- MERCEDES‑BENZ W230 Cabriolet (2001‑2012)
- All variants of the SL 500, SL 55 AMG, and SL 55 AMG Kompressor within the same model years.
Because the lamp uses a standard 5-pin connector, it can be installed in any vehicle that originally supported the OEM brake light assembly. No additional wiring or adapters are required.
Installation Guide
- Safety First: Disconnect the battery to prevent accidental electrical discharge.
- Remove Existing Light: Unscrew the rear bumper panel, locate the original brake light housing, and detach the wiring harness.
- Mount the New LED Lamp: Align the mounting brackets with the vehicle’s existing holes. Secure using the supplied screws.
- Connect Wiring: Plug the 5-pin connector into the corresponding socket on the vehicle’s electrical system.
- Test Functionality: Reconnect the battery and activate the brake lights to confirm proper operation.
- Reassemble Bumper: Replace the bumper panel and fasten all screws securely.
Performance Specifications
| Parameter | Specification |
|---|---|
| Voltage | 12 V DC |
| Current Draw | 0.2 A (typical) |
| Luminous Intensity | ≈ 200 cd (candela) |
| Color Temperature | ~ 3200 K (warm white) |
| Operating Temperature Range | -40 °C to +85 °C |
| Lifetime | ≥ 50,000 h |
| Dimensions | 35 mm × 25 mm × 15 mm (approx.) |
| Weight | ≈ 30 g |
Maintenance & Troubleshooting
- Cleaning: Use a soft, lint-free cloth to wipe the LED surface. Avoid abrasive cleaners that could damage the housing.
- Check for Loose Connections: If the brake light intermittently fails, inspect the wiring harness and connector pins for corrosion or looseness.
- Replace if Dull: Should the lamp appear dimmer after extended use, replace it with a new unit; LED failure is typically due to internal component degradation rather than external factors.
Why Choose This LED Brake Light?
The LED 3rd Third Brake Stop Lamp Light offers a blend of safety, reliability, and aesthetic refinement. By upgrading from the original incandescent unit, owners gain:
- A instantaneous warning signal that enhances rear visibility.
- A significant reduction in maintenance costs thanks to its extended lifespan.
- An overall improvement in the vehicle’s electrical efficiency, preserving battery life and reducing strain on the alternator.
- The ability to maintain the authentic look and feel of the Mercedes SL-Class while incorporating modern lighting technology.
Conclusion
For drivers who value both performance and style, the LED 3rd Third Brake Stop Lamp Light is an essential upgrade for any MERCEDES‑BENZ SL-Class W230/R230 (2001‑2012). Its superior brightness, rapid response, and durable construction make it a reliable safety feature that complements the vehicle’s iconic design. Whether you’re restoring a classic model or simply enhancing your daily commute, this LED brake light delivers unmatched quality and peace of mind.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 80.09 EUR  70.05 EUR  73.80 EUR  85.31 EUR |
| Colors
Predominant colors of the product |
|
| Tags | LED 3rd Third Stop Lamp Light MERCEDES W230 |
| Identifiers | |
| Brand | TYC TYC is a brand that specializes in automotive lighting products. They offer a wide range of products, including headlights, tail lights, and fog lights. They are known for their high-quality products and for providing excellent customer service. |
| MPN | TYC 15-0163-00-9 |
| ID | 7124800 |
| Dimensions / Weight | |
| Key Features | |
Related articles
