Beru AG 0890300034 Grease

Beru AG 0890300034 Grease – A Comprehensive Overview

Beru AG 0890300034 Grease is a high‑performance lubricating paste specifically engineered for automotive ignition systems. It is designed to provide reliable, long‑lasting protection for critical components such as glow plugs and preheaters, ensuring optimal engine performance even under demanding operating conditions.

Key Characteristics

• Form Factor: 10 g tube – compact yet sufficient for multiple applications.
• Color & Texture: White paste with a smooth, non‑slip consistency that adheres firmly to metal surfaces.
• Temperature Range: Effective from -40 °C up to +120 °C, making it suitable for both cold starts and high‑temperature engine operation.
• Chemical Composition: CFC‑free formulation that complies with modern environmental regulations while delivering superior lubrication performance.

Primary Applications

The grease is specifically formulated for the following automotive components:

• Glow Plugs (Preheaters): Provides a protective barrier against corrosion and wear, ensuring consistent ignition timing.
• Ignition system connectors and terminals – prevents electrical contact degradation.
• Engine block and cylinder head fasteners that require a low‑friction, high‑temperature resistant lubricant.

Performance Benefits

• Corrosion Resistance: The paste forms an impermeable layer over metal surfaces, guarding against moisture and oxidation.
• Low Friction: Reduces wear on moving parts, extending the lifespan of glow plugs and associated hardware.
• Thermal Stability: Maintains viscosity across a wide temperature spectrum, preventing grease breakdown during engine start‑up or high‑load operation.
• Ease of Application: The paste consistency allows for precise placement without excessive mess, ensuring that only the intended surfaces are lubricated.

Application Procedure

1. Preparation: Clean the target area with a solvent or alcohol to remove oil, dirt, and old grease. Dry thoroughly.
2. Dispensing: Open the tube and apply a small amount of paste directly onto the glow plug shaft or connector surface.
3. Distribution: Spread evenly with a clean tool (e.g., plastic spatula) to cover all contact points.
4. Reassembly: Reinstall the component, ensuring proper seating and torque specifications are met.

Compatibility Notes

The grease is compatible with most standard automotive glow plugs and ignition components. It should not be used on high‑temperature seals or rubber parts that may degrade when exposed to lubricants; always verify compatibility with the manufacturer’s guidelines for specific vehicle models.

Environmental & Safety Considerations

• CFC‑Free: The product is formulated without chlorofluorocarbons, aligning with global environmental protection standards.
• Non‑Flammable: Classified as non‑flammable under normal operating conditions, reducing fire risk during application.
• Safe Handling: No special protective equipment is required for routine use; standard gloves and eye protection are recommended when handling large quantities.

Quality Assurance

The grease adheres to stringent German engineering standards, ensuring consistent performance across all batches. Its formulation has been tested under rigorous laboratory conditions to confirm durability, viscosity retention, and corrosion prevention capabilities.

Conclusion

Beru AG 0890300034 Grease stands out as a reliable, environmentally responsible lubricant for automotive ignition systems. Its precise blend of thermal stability, low friction, and corrosion resistance makes it an essential component for maintaining engine reliability and performance over time.