93.87 EUR
Bilstein 24 – 240116 Damper Car
High-quality shock absorber designed as an OE replacement, ensuring smooth ride and improved vehicle stability.
Stores where to buy this product
Trodo EU
Bilstein 24‑240116 Damper Car
The Bilstein 24‑240116 is a high‑performance rear shock absorber designed to deliver superior handling, comfort, and durability for the MERCEDES‑BENZ E‑CLASS (W211). As part of Bilstein’s renowned B4 series, this damper incorporates advanced engineering that meets or exceeds OEM specifications while providing noticeable improvements in ride quality.
Key Design Features
- Single‑Rod Construction: The damper uses a single‑rod design that reduces weight and improves responsiveness compared to dual‑rod units. This configuration also simplifies installation, allowing for quick swaps without the need for complex alignment tools.
- High‑Grade Steel Housing: Constructed from premium steel, the housing resists corrosion and withstands high impact forces during aggressive driving or off‑road use.
- Precision Valve System: The internal valve system is engineered for smooth damping action across a wide range of speeds. It provides consistent performance whether cruising on highways or navigating tight city streets.
- Optimized Oil Flow: Bilstein’s proprietary oil flow design ensures rapid heat dissipation, preventing the damper from overheating and maintaining optimal stiffness over time.
- Compact Footprint: The unit’s compact dimensions allow it to fit into the existing mounting points of the W211 without requiring modifications to suspension components.
Performance Benefits
The 24‑240116 delivers a host of performance advantages that enhance both safety and comfort:
- Improved Road Holding: The damper’s refined damping curve reduces body roll during cornering, keeping tires in better contact with the road surface.
- Enhanced Ride Comfort: By effectively absorbing bumps and potholes, the unit smooths out harsh impacts that would otherwise be transmitted to passengers.
- Long‑Term Durability: Bilstein’s rigorous testing ensures that the damper maintains its performance characteristics for thousands of miles under varied driving conditions.
- Reduced Maintenance Needs: The high-quality materials and sealed design minimize wear, reducing the frequency of routine inspections or replacements.
Compatibility Overview
The 24‑240116 is specifically engineered for the rear suspension of the MERCEDES‑BENZ E‑CLASS (W211). It serves as a direct replacement for the OEM unit, matching all mounting points and dimensions. The damper fits both left and right rear positions, making it suitable for single or dual installations.
Installation Guide
Installing the 24‑240116 is straightforward and can be completed with basic hand tools:
- Remove the Old Damper: Loosen the mounting bolts on the rear subframe, lift the vehicle securely, and detach the existing shock absorber.
- Position the New Unit: Align the 24‑240116 with the mounting points. Ensure that the internal valve orientation matches the original configuration to preserve damping characteristics.
- Tighten Mounting Bolts: Secure the damper using a torque wrench set to the manufacturer’s specifications (typically around 80–90 Nm). This step is critical for maintaining suspension geometry.
- Check Alignment: Verify that the shock absorber sits flush against the subframe and that there are no gaps or misalignments.
- Lower the Vehicle: Carefully lower the car back onto the ground, then perform a quick test drive to confirm smooth operation.
Maintenance Tips
Although the 24‑240116 is designed for low maintenance, periodic checks can extend its lifespan:
- Inspect for Leaks: Check the top and bottom of the damper for oil seepage. A small leak may indicate a seal failure that could compromise performance.
- Check Mounting Bolts: Periodically verify torque on mounting bolts, especially after long drives or rough terrain.
- Monitor Ride Quality: If you notice increased body roll or a harsher ride, inspect the damper for damage or wear.
Why Choose Bilstein?
BILSTEIN has earned a reputation as a pioneer in shock absorber technology. The 24‑240116 reflects this legacy through:
- Advanced Engineering: Each unit undergoes extensive testing to ensure it meets the demanding standards of high-performance vehicles.
- Proven Track Record: Bilstein’s products are widely used in motorsports, touring cars, and luxury sedans worldwide.
- Customer Support: While this article focuses on product details, Bilstein offers comprehensive technical resources for installers and enthusiasts alike.
Conclusion
The Bilstein 24‑240116 Damper Car stands out as a reliable, high‑quality replacement for the rear shock absorber of the MERCEDES‑BENZ E‑CLASS (W211). Its single‑rod design, premium materials, and precise damping characteristics combine to deliver an enhanced driving experience that balances comfort with performance. Whether you’re restoring a classic sedan or upgrading your daily driver, this unit offers a durable solution that meets the exacting standards of both OEM specifications and Bilstein’s own rigorous quality benchmarks.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 111.70 EUR  81.01 EUR  105.58 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  Bilstein is a brand of shock absorbers and struts. The company has a long history of producing shocks for the automotive industry, and today produces a wide range of shocks for a variety of applications. Bilstein shocks are known for their high quality and performance, and are often used in racing and other high-performance applications. |
| Model | Bilstein 24-240116 |
| MPN | Bilstein 24-240116 |
| ID | 7003272 |
| Dimensions / Weight | |
| Key Features | |
Related articles
