7.41 EUR
Bosch P9610 - Oil Filter Car
Diameter [mm]: 83Diameter 1 [mm]: 24Diameter 2 [mm]: 12Filter type: Filter Insert Height [mm]: 121Height 1 [mm]: 117
Stores where to buy this product
Product Overview
The Bosch P9610 Oil Filter Car is a high‑performance engine protection component designed to keep your vehicle’s lubrication system clean and efficient. Engine oil carries away heat, reduces friction, and protects critical moving parts from wear. The P9610 filter captures contaminants such as metal shavings, dirt, and combustion by‑products, ensuring that only pristine oil circulates through the engine.
Key Features
- Premium Filtration Efficiency: Utilizes a multi‑layer media system that removes up to 99.9% of particles larger than 5 microns.
- Robust Construction: Made from high‑quality polypropylene housing and reinforced with a durable rubber gasket for leak‑free performance.
- Wide Compatibility: Fits an extensive range of Mercedes-Benz, Puch, and other OEM models, including the S‑Class, SL, G‑Model, W123, W126, and many more.
- Easy Installation: Designed for quick removal and replacement with standard filter wrenches; no special tools required.
- Long‑Lasting Seal: The gasket material is engineered to resist oil degradation, maintaining a tight seal over extended service intervals.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 1457429610 (P9610) |
| Filter Media | Multi‑layer synthetic fiber |
| Housing Material | Polypropylene |
| Gasket Material | Rubber (EPDM) |
| Size | 121 mm diameter, 83 mm height |
| Compatibility Range | Mercedes‑Benz & Puch models from W114 to G‑Class SUV |
| Filter Rating | 5.0–5.5 L (typical) |
| Operating Temperature | -40 °C to +120 °C |
Installation Guide
- Prepare the Vehicle: Park on a level surface, engage the parking brake, and allow the engine to cool.
- Locate the Filter: Open the hood and identify the oil filter housing; it is typically positioned near the front of the engine block.
- Drain Excess Oil (Optional): For models with a removable drain plug, you may choose to drain a small amount of oil before removal to reduce pressure.
- Remove Old Filter: Use an appropriate filter wrench to loosen and unscrew the old filter. Be prepared for a slight splash of oil.
- Inspect Housing: Clean any debris from the housing opening with a rag; ensure the gasket seat is free of damage.
- Install New Filter: Place the new Bosch P9610 onto the housing, hand‑tighten until snug. Do not overtighten to avoid damaging the gasket.
- Check for Leaks: Start the engine briefly and observe the filter area for any oil seepage; tighten slightly if necessary.
- Dispose of Old Filter Properly: Return the used filter to a recycling facility or designated disposal point.
Maintenance Tips
- Replace the filter at every scheduled oil change, typically every 10,000 km or 12 months, whichever comes first.
- If you drive in dusty or harsh conditions, consider more frequent replacements to preserve engine longevity.
- Always use a high‑quality oil that meets manufacturer specifications; the filter’s performance is maximized when paired with proper lubrication.
Why Choose Bosch?
Bosch has been a trusted name in automotive components for decades. The P9610 filter embodies the company’s commitment to precision engineering, reliability, and environmental responsibility. By selecting this filter, you ensure that your engine receives the best possible protection against wear and corrosion.
Applications Across Vehicle Models
The Bosch P9610 is engineered for a broad spectrum of vehicles. Below are representative examples of models where this filter is an exact fit:
- Mercedes‑Benz S‑Class (W126) – 3.8 L and 4.5 L engines.
- Mercedes‑Benz SL (R107) – 3.5 L to 5.0 L variants.
- Puch G‑Model – 2.7 L to 5.0 L engines.
- Various W123, W114, and W460 series models spanning the 1970s through early 1990s.
Performance Benefits
- Extended Engine Life: By trapping contaminants before they reach critical components, the filter reduces wear on bearings, pistons, and camshafts.
- Improved Fuel Efficiency: Clean oil flows more freely, lowering internal resistance and allowing the engine to operate at optimal efficiency.
- Consistent Oil Pressure: The filter’s design maintains stable pressure across a wide range of operating temperatures.
Conclusion
The Bosch P9610 Oil Filter Car is more than just a replacement part; it is an essential element in preserving the performance, reliability, and longevity of your vehicle’s engine. With its advanced filtration technology, broad compatibility, and proven durability, this filter stands out as the preferred choice for automotive professionals and enthusiasts alike.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Tags | Oil filter Engine Oil Filter Genuine BOSCH Oil Filter fits Bosch A0001800509 Bosch P9610 Bosch A0001800509 New Genuine BOSCH Oil Mercedes Benz 420 Mercedes Benz 500 |
| Identifiers | |
| Brand | ![]() Bosch is a brand of power tools and appliances. The company was founded in 1886 and produces a wide range of power tools, appliances, and accessories. Bosch tools are known for their quality and durability, and the company is a leader in innovation and design. |
| Model | Bosch 1457429610 |
| MPN | Bosch 1457429610 |
| ID | 6977892 |
| Dimensions / Weight | |
| Key Features | |

