Bosch F026407045 Oil-Filter Element

Bosch F026407045 Oil‑Filter Element – Precision Filtration for Heavy‑Duty Engines

The Bosch F026407045 Oil‑Filter Element is a high‑performance filtration solution engineered to meet the demanding requirements of commercial and industrial engines. Designed with German precision, this filter delivers reliable protection against contaminants while maintaining optimal oil flow.

Key Features & Technical Specifications

• Model Number: F026407045
• Type: Oil‑Filter Element (Cartucho filtrante)
• Compatibility: Engine models from DAF, Renault, TEMSA, VDL, Van Hool, and other heavy‑vehicle manufacturers.
• Dimensions: Outer diameter 113 mm; internal dimensions tailored to fit CF 85, XF 105, XF 106, and related mounting systems.
• Material: Premium synthetic filter media with a multi‑layer structure for superior particle capture.
• Seal Type: Integrated gasket seal ensuring leak‑free installation.
• Performance Rating: Meets or exceeds OEM specifications for particulate filtration and pressure drop.

Applications Across the Fleet

The F026407045 is specifically engineered to fit a wide range of heavy‑vehicle engines, including:

• DAF CF 85 & XF Series: Ideal for medium and heavy trucks requiring robust filtration.
• Renault VDL & Van Hool Engines: Provides reliable protection in long‑haul and service vehicles.
• TEMSA SAFARI & SAFIR Models: Ensures optimal oil cleanliness for high‑performance engines.
• Other compatible platforms such as BOVA, DAF CF, XF, TEMSA, VDL, and Van Hool.

Installation Guide

Installing the Bosch F026407045 Oil‑Filter Element is straightforward yet critical for maintaining engine health. Follow these steps:

1. Preparation: Warm up the engine to operating temperature to ensure oil viscosity is optimal.
2. Drainage: Position a suitable container beneath the filter housing and carefully remove the old filter, allowing excess oil to drain.
3. Cleaning: Inspect the mounting surface for debris or corrosion; clean with a lint‑free cloth.
4. Sealing: Apply a thin layer of factory‑approved sealant if required by the vehicle manufacturer.
5. Installation: Place the new filter element onto the housing, ensuring it sits flush and the gasket aligns correctly.
6. Tightening: Secure with the specified torque setting (typically 10–12 Nm for most heavy‑vehicle applications).
7. Verification: Check for leaks around the seal; if none are present, start the engine and monitor oil pressure.

Benefits of Choosing Bosch F026407045

• Extended Engine Life: By trapping microscopic contaminants, the filter protects bearings, pistons, and camshafts from wear.
• Consistent Oil Pressure: The low pressure drop design maintains optimal oil flow even under high‑load conditions.
• Reliability in Harsh Environments: Suitable for dusty or oily work sites where particulate ingress is a constant threat.
• OEM Compatibility: Meets original equipment manufacturer standards, ensuring seamless integration without compromising performance.
• Cost‑Effective Maintenance: Reduces the frequency of oil changes and filter replacements, lowering overall operating costs.

Quality Assurance & Compliance

The Bosch F026407045 Oil‑Filter Element undergoes rigorous testing to comply with international automotive standards. Each unit is inspected for:

• Filtration Efficiency: Capable of capturing particles down to 5 µm.
• Pressure Drop: Maintains a maximum differential of 0.8 bar under normal operating conditions.
• Material Integrity: Resistant to oil degradation and temperature fluctuations up to 200 °C.

Maintenance Tips for Longevity

To ensure the filter continues to perform at peak levels, consider these best practices:

• Replace the filter according to the vehicle manufacturer’s recommended interval or sooner if operating in exceptionally dusty conditions.
• Avoid using incompatible filters that may compromise seal integrity.
• Inspect the gasket for signs of wear before each replacement cycle.
• Keep the filter storage area clean and dry to prevent contamination.

Conclusion

The Bosch F026407045 Oil‑Filter Element represents a blend of engineering excellence and practical reliability. Its compatibility with a broad spectrum of heavy‑vehicle engines, combined with superior filtration performance, makes it an indispensable component for fleet operators seeking to protect engine longevity while maintaining operational efficiency.

By selecting the Bosch F026407045, you invest in a product that delivers consistent protection, aligns with OEM standards, and supports the demanding needs of modern commercial transportation.