febi bilstein 21819 Axle Beam Mount for rear axle support, pack of one

Febi Bilstein 21819 Axle Beam Mount – Rear Axle Support

The Febi Bilstein 21819 Axle Beam Mount is a high‑performance suspension component designed to replace the original rear axle beam bushings on a wide range of classic Peugeot models. This single unit fits either the left or right side of the rear axle, providing precise alignment and robust support for the vehicle’s chassis.

Key Features

• OEM‑matched quality: Manufactured to the exact specifications used by Peugeot during production, ensuring seamless integration with existing suspension geometry.
• Durable construction: Combines a steel core for strength with an elastomeric rubber sleeve that absorbs road shocks and reduces vibration.
• Wide compatibility: Suitable for the following models:
  • Peugeot 205 (Mk I, Mk II, Convertible)
  • Peugeot 309 (Mk I, Mk II)
  • Peugeot 205 GTI, 1.4 CT, 1.6 GTI, 1.9 GTI
  • Peugeot 309 1.9 D, 1.8 TD, 1.6 D, 1.4 D
• Improved handling: The elastomeric sleeve reduces side‑to‑side movement of the axle beam, resulting in tighter steering response and better cornering stability.
• Easy installation: Designed for straightforward removal and replacement without special tools or modifications to the vehicle’s chassis.

Technical Specifications

Benefits of Choosing Febi Bilstein 21819

The original factory bushings on older Peugeot models are often worn, leading to excessive play in the rear suspension and a noticeable loss of handling precision. The Febi Bilstein 21819 addresses these issues by:

• Restoring Original Geometry: Maintains the exact mounting angles and distances specified by Peugeot, preventing alignment drift.
• Reducing Road Noise: The elastomeric sleeve dampens vibrations transmitted from the road to the chassis.
• Extending Component Life: High‑grade materials resist wear and corrosion better than many aftermarket alternatives.
• Enhancing Safety: A properly functioning axle beam mount contributes to overall vehicle stability, especially during hard braking or sudden steering inputs.

Installation Overview

Replacing the rear axle beam mount is a straightforward process that can be completed in under an hour with basic hand tools. The following steps outline the typical procedure:

1. Secure the Vehicle: Raise the rear of the car using a jack and support it on jack stands. Ensure the vehicle is level.
2. Remove the Old Bushing: Locate the axle beam mount on the side you are replacing. Use a socket or wrench to loosen the retaining nut that holds the bushing in place. Carefully pull the old bushing out of its seat.
3. Prepare the New Unit: Inspect the new Febi Bilstein 21819 for any shipping damage. If necessary, clean the mounting surface with a solvent to remove grease or debris.
4. Install the New Bushing: Slide the new bushing into the axle beam seat until it sits flush. Tighten the retaining nut to the manufacturer’s torque specification (typically around 30–35 Nm, but verify with your vehicle’s service manual).
5. Repeat on the Opposite Side (Optional): For balanced handling, consider installing a matching unit on the other side of the rear axle.
6. Lower the Vehicle: Carefully lower the car from the jack stands and perform a test drive to confirm proper operation.

Maintenance Tips

• Inspect the bushing periodically for signs of wear, such as excessive play or noise during cornering.
• Avoid driving on extremely rough terrain if the bushings are already worn; this can accelerate damage.
• If you notice any unusual vibrations or steering drift after installation, double‑check that the bushing is seated correctly and the retaining nut is properly torqued.

Why Febi Bilstein?

Febi Bilstein has a long-standing reputation for producing high‑quality suspension components that meet or exceed OEM standards. Their products are engineered with precision machining, rigorous testing, and materials selected for longevity under diverse driving conditions.

• Precision Engineering: Each bushing is manufactured to tight tolerances, ensuring consistent performance across all units.
• Quality Assurance: Products undergo multiple quality checks, including dimensional verification and functional testing.
• Global Support: Febi Bilstein’s extensive distribution network means parts are readily available for classic car enthusiasts worldwide.

Conclusion

The Febi Bilstein 21819 Axle Beam Mount is an essential upgrade for owners of vintage Peugeot models seeking to restore their vehicles’ original handling characteristics. By replacing worn bushings with a component that matches OEM specifications, drivers can enjoy improved stability, reduced road noise, and enhanced safety—all while preserving the authenticity of their classic car.

Whether you’re restoring a 1980s Peugeot 205 GTI or maintaining a 1990s Peugeot 309, this single, high‑performance part delivers reliable performance that stands up to the demands of everyday driving and spirited road sessions alike.